diff --git a/pages/Configuring/Multi-GPU.md b/pages/Configuring/Multi-GPU.md
index b8efd1d..747d4ea 100644
--- a/pages/Configuring/Multi-GPU.md
+++ b/pages/Configuring/Multi-GPU.md
@@ -37,13 +37,16 @@ lrwxrwxrwx 1 root root  8 Jul 14 15:45 pci-0000:06:00.0-card -> ../card1
 lrwxrwxrwx 1 root root 13 Jul 14 15:45 pci-0000:06:00.0-render -> ../renderD129
 ```
 
-So from the above outputs, we can match the bus IDs and determine that NVIDIA is
-`card0` and AMD is `card1`.
+So from the above outputs, we can see that the path for the AMD card is
+`pci-0000:06:00.0-card`, due to the matching `06:00.0` from the first command.
+Do not use the `card1` symlink indicated here. It is dynamically assigned at
+boot and is subject to frequent change, making it unsuitable as a marker for GPU selection.
 
 ## Telling Hyprland which GPU to use
 
 After determining which "card" belongs to which GPU, we now have to tell
 Hyprland the GPU we want to use primarily.
+This is done by setting the `WLR_DRM_DEVICES` environment variable.
 
 {{< callout type=info >}}
 
@@ -55,23 +58,36 @@ with a lower and higher power rating GPUs respectively.
 
 {{< /callout >}}
 
-We can do so by using the `WLR_DRM_DEVICES` variable.
+If you wish to use the integrated GPU to run Hyprland, no further action is
+required. wlroots will set `WLR_DRM_DEVICES` to the integrated GPU by default.
 
-Add the following template to `hyprland.conf`
+If instead you would like to use another GPU, you must first create a symlink to
+the card from the previous section.
 
-```ini
-env = WLR_DRM_DEVICES,/dev/dri/cardN
+```
+ln -sf /dev/dri/pci-0000:06:00.0-card ~/.config/hypr/card
 ```
 
-For our case, we want to use `card1` primarily and use it to render stuff.
+It is not possible to directly use the `/dev/dri/pci-0000:06:00.0-card` path,
+as wlroots interprets the colon symbols in the path as separators. Escaping
+characters will not rectify this.
+
+Afterwards, you must set the `WLR_DRM_DEVICES` environment variable in
+hyprland.conf to this linked card.
 
 ```ini
-env = WLR_DRM_DEVICES,/dev/dri/card1:/dev/dri/card0
+env = WLR_DRM_DEVICES,~/.config/hypr/card
 ```
 
-Here, we tell Hyprland to set priorities. If `card1` isn't available for
-whatever reason, use `card0`. So if the AMD GPU isn't available, use NVIDIA. The
-colon is for setting priorities, essentially.
+If you want to set a sequence of fallback cards, symlink another card and set
+the var as a colon separated list in order of priority.
 
-You should now be able to use an integrated GPU for for lighter GPU loads,
-including Hyprland.
+```ini
+env = WLR_DRM_DEVICES,~/.config/hypr/card:~/.config/hypr/otherCard
+```
+
+Here, we tell Hyprland to set priorities. If `card` isn't available for
+whatever reason, use `otherCard`. So if the AMD GPU isn't available, use NVIDIA.
+
+You should now be able to use an integrated GPU for lighter GPU loads,
+including Hyprland, or default to your dGPU if you prefer.