Treewide: fix formatting and addressing

Co-authored-by: NotAShelf <itsashelf@gmail.com> Co-authored-by: Antonino Scordino <a.scordino.07@gmail.com> Co-authored-by: vaxerski <43317083+vaxerski@users.noreply.github.com>
2024-11-22 12:45:59 +01:00 · 2022-10-23 17:35:39 +03:00 · 2022-10-23 17:35:39 +03:00 · 3dae7b8604
commit 3dae7b8604
parent d64b8ed124
27 changed files with 315 additions and 256 deletions
--- a/pages/Configuring/Animations.md
+++ b/pages/Configuring/Animations.md
@ -1,7 +1,8 @@
-## Table of contents
+# Table of contents
+
 {{< toc >}}

-## General
+# General

 Animations are declared with the `animation` keyword.

@ -11,13 +12,6 @@ or
 animation=NAME,ONOFF,SPEED,CURVE
 ```

-for example:
-
-```ini
-animation=workspaces,1,8,default
-animation=windows,1,10,myepiccurve,slide
-```
-
 `ONOFF` can be either 0 or 1, 0 to disable, 1 to enable.

 `SPEED` is the amount of ds (1ds = 100ms) the animation will take
@ -27,11 +21,18 @@ animation=windows,1,10,myepiccurve,slide
 `STYLE` (optional) is the animation style

 The animations are a tree. If an animation is unset, it will inherit its
-parent's values.
+parent's values. See [the animation tree](#animation-tree).

-_Animation tree:_
+## Examples

+```ini
+animation=workspaces,1,8,default
+animation=windows,1,10,myepiccurve,slide
 ```
+
+## Animation tree
+
+```txt
 global
  ↳ windows - styles: slide, popin
    ↳ windowsIn - window open
@ -48,18 +49,7 @@ global
    ↳ specialWorkspace - styles: same as workspaces
 ```

-## Extras
-
-For animation style `popin` in `windows`, you can specify a minimum percentage
-to start from. For example:
-
-```ini
-animation=windows,1,8,default,popin 80%
-```
-
-will make the animation 80% -> 100% of the size.
-
-## Curves
+# Curves

 Defining your own Bezier curve can be done with the `bezier` keyword:

@ -69,10 +59,22 @@ bezier=NAME,X0,Y0,X1,Y1

 where `NAME` is the name, and the rest are two points for the Cubic Bezier. A
 good website to design your bezier can be found
-[here, on cssportal.com](https://www.cssportal.com/css-cubic-bezier-generator/).
+[here, on cssportal.com](https://www.cssportal.com/css-cubic-bezier-generator/), but
+if you want to instead choose from a list of beziers, you can check out [easings.net](https://easings.net).

-Example curve:
+## Example

 ```ini
 bezier=overshot,0.05,0.9,0.1,1.1
 ```
+
+# Extras
+
+For animation style `popin` in `windows`, you can specify a minimum percentage
+to start from. For example:
+
+```ini
+animation=windows,1,8,default,popin 80%
+```
+
+will make the animation 80% -> 100% of the size.
--- a/pages/Configuring/Binds.md
+++ b/pages/Configuring/Binds.md
@ -1,8 +1,8 @@
+# Table of Contents

-## Table of contents
 {{< toc >}}

-## Basic
+# Basic

 ```ini
 bind=MODS,key,dispatcher,params
@ -18,14 +18,16 @@ will bind opening firefox to <key>SUPER</key> + <key>SHIFT</key> + <key>Q</key>

 {{< hint type=tip >}}
 For binding keys without a modkey, leave it empty:
+
 ```ini
 bind=,Print,exec,grim
 ```
+
 {{< /hint >}}

-*For a complete mod list, see [Variables](../Variables/#variable-types).*
+_For a complete mod list, see [Variables](../Variables/#variable-types)._

-*The dispatcher list can be found in [Dispatchers](../Dispatchers).*
+_The dispatcher list can be found in [Dispatchers](../Dispatchers)._

 ## Uncommon syms / binding with a keycode

@ -47,9 +49,10 @@ bind=SUPER,28,exec,amongus
 Will bind <key>SUPER</key> + <key>T</key>. (<key>T</key> is keycode 28.) - You
 can also use `xev` or `wev` to find keycodes.

-## Misc
+# Misc
+
+## Unbind

-### Unbind
 You can also unbind with `unbind`, e.g.:

 ```ini
@ -58,7 +61,12 @@ unbind=SUPER,O

 May be useful for dynamic keybindings with `hyprctl`.

-### Mouse buttons
+```sh
+hyprctl keyword unbind SUPER,O
+```
+
+## Mouse buttons
+
 You can also bind mouse buttons, by prefacing the mouse keycode with `mouse:`,
 for example:

@ -68,7 +76,8 @@ bind=SUPER,mouse:272,exec,amongus

 will bind it to <key>SUPER</key> + <key>LMB</key>.

-### Only modkeys
+## Only modkeys
+
 For binding only modkeys, you need to use the TARGET modmask (with the
 activating mod) and the `r` flag, e.g.:

@ -76,23 +85,29 @@ activating mod) and the `r` flag, e.g.:
 bindr=SUPERALT,Alt_L,exec,amongus
 ```

-### Mouse wheel
+## Mouse wheel
+
 You can also bind the mouse wheel with `mouse_up` and `mouse_down`:
+
 ```ini
 bind=SUPER,mouse_down,workspace,e-1
 ```
+
 (control the reset time with `binds:scroll_event_delay`)

-### Switches
+## Switches
+
 Useful for binding e.g. the lid close/open event:
-```
+
+```ini
 bindl=,switch:[switch name],exec,swaylock
 ```
+
 check out your switches in `hyprctl devices`.

-## Bind flags
+# Bind flags

-bind supports flags in this format:
+`bind` supports flags in this format:

 ```ini
 bind[flags]=...
@ -104,47 +119,64 @@ e.g.:
 bindrl=MOD,KEY,exec,amongus
 ```

-flags:
+Flags:

 ```ini
-l -> locked, aka. works also when an input inhibitor is active
+l -> locked, aka. works also when an an input inhibitor (e.g. a lockscreen) is active
 r -> release, will trigger on release of a key
 e -> repeat, will repeat when held.
 m -> mouse, see below
 ```

-## Mouse Binds
+Example Usage:
+
+```ini
+# Example volume button that allows press and hold
+binde=, XF86AudioRaiseVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+
+
+# Example volume button that will activate even while an input inhibitor is active
+bindl=, XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
+
+# Start wofi opens wofi on first press, closes it on second
+bindr=SUPER, SUPER_L, exec, pkill wofi || wofi
+
+# See Mouse Binds section for bindm usage
+```
+
+# Mouse Binds
+
 Mouse binds are binds that heavily rely on a mouse, usually its movement.
 They will have one less arg, and look for example like this:

-```
+```ini
 bindm=ALT,mouse:272,movewindow
 ```

 this will create a bind with <key>ALT</key> + <key>LMB</key> to move the window
 with your mouse.

-*Available mouse binds*:
+_Available mouse binds_:

 | Name | Description |
 | -----|------------ |
-| movewindow | moves the active window |
+| movewindow   | moves the active window   |
 | resizewindow | resizes the active window |

-*Common mouse buttons' codes:*
-```
+_Common mouse buttons' codes:_
+
+```txt
 LMB -> 272
 RMB -> 273
 ```

-*for more, you can of course use `wev` to check.*
+_for more, you can of course use `wev` to check._

 {{< hint type=tip >}}
 Mouse binds, despite their name, behave like normal binds. You are free to use
 whatever keys / mods you please. When held, the mouse function will be activated.
 {{< /hint >}}

-## Binding mods
+# Binding mods

 You can bind a mod alone like this:

@ -152,21 +184,22 @@ You can bind a mod alone like this:
 bindr=ALT,Alt_L,exec,amongus
 ```

-## Global Keybinds
+# Global Keybinds
+
 Yes, you heard this right, Hyprland does support global keybinds for ALL apps,
 including OBS, Discord, Firefox, etc.

-See the `pass` dispatcher for keybinds.
+See the [`pass` dispatcher](./Dispatchers/#dispatchers) for keybinds.

-e.g.:
+Let's take OBS as an example: the "Start/Stop Recording" keybind is set to 
+<key>SUPER</key> + <key>F10</key>, and you want to make it work globally.

-I've set the "Start/Stop Recording" keybind in OBS to <key>SUPER</key> +
-<key>F10</key>, and I want it to be global.
+Simply add

-Simple, add
 ```ini
 bind = SUPER,F10,pass,^(com\.obsproject\.Studio)$
 ```
+
 to your config and you're done.

 `pass` will pass the PRESS and RELEASE events by itself, no need for a `bindr`.
@ -184,12 +217,12 @@ keybind", otherwise passing from a different XWayland app may not work.

 It works flawlessly with all native Wayland applications though.

-*Side note*: **OBS** on Wayland really dislikes keybinds with modifiers. If
+_Side note_: **OBS** on Wayland really dislikes keybinds with modifiers. If
 they don't work, try removing mods and binding them to e.g. <key>F1</key>.
 Combining this with a submap should yield neat and usable results.
 {{< /hint >}}

-## Submaps
+# Submaps

 If you want keybind submaps, for example if you press <key>ALT</key> +
 <key>R</key>, you can enter a "resize" mode, resize with arrow keys, and leave
@ -221,7 +254,7 @@ submap=reset
 this case, `escape`)

 If you get stuck inside a keymap, you can use `hyprctl dispatch submap reset` to
-go back. If you do not have a terminal open, tough luck buddy. I warned you.
+go back. If you do not have a terminal open, tough luck buddy. You have been warned.

 You can also set the same keybind to perform multiple actions, such as resize
 and close the submap, like so:
--- a/pages/Configuring/Configuring-Hyprland.md
+++ b/pages/Configuring/Configuring-Hyprland.md
@ -1,16 +1,16 @@
 The config is located in `~/.config/hypr/hyprland.conf`.

-I recommend you copy the `examples/hyprland.conf`, but you can also edit the
+It is recommended to copy the `examples/hyprland.conf`, but you can also edit the
 autogenerated config.

 By removing the line `autogenerated=1` you'll remove the yellow warning.

 There is no "reload" keybind. The config is reloaded the moment you save it.

-Start a section with `name {` and end in `}` ***in separate lines!***
+Start a section with `name {` and end in `}` **_in separate lines!_**

 {{< hint type=important >}}
-The default config is *very* barebones. Please refer to this wiki page and the pages
+The default config is _very_ barebones. Please refer to this wiki page and the pages
 linked further down here for full configuration instructions.

 **Make sure to read the "Variables" page as well**. It covers all the
@ -19,7 +19,7 @@ toggleable / numerical options.

 # Line style

-every config line is a command followed by a value.
+Every config line is a command followed by a value.

 ```ini
 COMMAND=VALUE
@ -45,7 +45,7 @@ To configure the "options" of Hyprland, animations, styling, etc. see

 # Advanced configuring

-Some keywords (binds, curves, execs, monitors, etc.) arent variables but define
+Some keywords (binds, curves, execs, monitors, etc.) are not variables but define
 special behaviour.

 See all of them in [Keywords](../Keywords) and the sidebar.
--- a/pages/Configuring/Dispatchers.md
+++ b/pages/Configuring/Dispatchers.md
@ -1,10 +1,11 @@
 # Table of contents
+
 {{< toc >}}

 Please keep in mind some layout-specific dispatchers will be listed in the
 layout pages (See the sidebar).

-## Parameter explanation
+# Parameter explanation

 | Param type | Description |
 | ---------- | ----------- |
@ -16,7 +17,7 @@ layout pages (See the sidebar).
 | floatdelta | a float value delta, e.g `-0.2` or `+0.2`. |
 | workspaceopt | see below. |

-# Dispatchers:
+# List of Dispatchers

 | Dispatcher | Description | Params |
 | ---------- | ----------- | ------ |
@ -58,9 +59,10 @@ layout pages (See the sidebar).
 it is NOT recommended to set DPMS with a keybind directly, as it
 might cause undefined behavior. Instead, consider something like

-```
+```ini
 bind = MOD,KEY,exec,sleep 1 && hyprctl dispatch dpms off
 ```
+
 {{< /hint >}}

 # Workspaces
@ -86,19 +88,19 @@ You have seven choices:
 `movetoworkspace`. Any other dispatcher will result in undocumented behavior.
 {{< /hint >}}

-## Special Workspace
+# Special Workspace

 Special workspace is what is called a "scratchpad" in some other places. A
 workspace that you can toggle on/off on any monitor.

 {{< hint >}}
 You cannot have floating windows in the Special workspace. Making a window floating
-will send it to the currently active *real* workspace.
+will send it to the currently active _real_ workspace.
 {{< /hint >}}

-## Workspace options
-```
+# Workspace options
+
+```txt
 allfloat -> makes all new windows floating (also floats/unfloats windows on toggle)
 allpseudo -> makes all new windows pseudo (also pseudos/unpseudos on toggle)
 ```
-
--- a/pages/Configuring/Dwindle-Layout.md
+++ b/pages/Configuring/Dwindle-Layout.md
@ -7,7 +7,7 @@ Dwindle splits are NOT PERMANENT. The split is determined dynamically with the
 W/H ratio of the parent node. If W > H, it's side-by-side. If H > W, it's
 top-and-bottom. You can make them permanent by enabling `preserve_split`.

-## Grouped (tabbed) windows
+# Grouped (tabbed) windows

 Dwindle allows you to make a group with the `togglegroup` bind dispatcher, and
 cycle through it with `changegroupactive`.
@ -44,7 +44,7 @@ category name: `dwindle`
 | no_gaps_when_only | whether to apply gaps when there is only one window on a workspace, aka. smart gaps. | bool | false |
 | use_active_for_splits | whether to prefer the active window or the mouse position for splits | bool | true |

-## Bind Dispatchers
+# Bind Dispatchers

 | dispatcher | description | params |
 |---|---|---|
--- a/pages/Configuring/Expanding-functionality.md
+++ b/pages/Configuring/Expanding-functionality.md
@ -7,12 +7,12 @@ The second, socket2, sends events for certain changes / actions and can be used
 to react to different events. See its description
 [here](../../IPC/).

-## Example script
+# Example script

 This bash script will change the outer gaps to 20 if the currently focused
 monitor is DP-1, and 30 otherwise.

-```bash
+```sh
 #!/bin/sh

 function handle {
--- a/pages/Configuring/Keywords.md
+++ b/pages/Configuring/Keywords.md
@ -1,10 +1,13 @@
-This page documents all of the more advanced config options.
+Keywords are not variables, but "commands" for more advanced configuring. On this
+page, you will be presented with some that do not deserve their own page.
+
+See the sidebar for more keywords to control binds, animations, monitors, et cetera.

 {{< hint type=important >}}

 Please remember, that for ALL arguments separated by a comma, if you want to
-leave one of them empty, you cannot reduce the number of commas, *unless told
-otherwise in a specific section*:
+leave one of them empty, you cannot reduce the number of commas, _unless told
+otherwise in a specific section_:

 ```ini
 three_param_keyword = A, B, C # OK
@ -19,6 +22,7 @@ three_param_keyword = A, B,  # OK
 {{< /hint >}}

 # Table of contents
+
 {{< toc format=html >}}

 # Executing
@ -26,21 +30,10 @@ three_param_keyword = A, B,  # OK
 you can execute a shell script on startup of the compositor or on each time it's
 reloaded.

-{{< hint type=info >}}
-
-**Note:** The issue below was fixed in upstream. (since *after* v0.15.0beta)
-
-There currently is a bug with the exec that makes the executed app
-unable to die if killed, use `SIGKILL` (e.g. `killall name -9`) or launch from a
-script (`exec-once=~/myscript.sh` and do `myapp &` in the script)
-
-{{< /hint >}}
-
 `exec-once=command` will execute only on launch

 `exec=command` will execute on each reload

-
 # Defining variables

 You can define your own custom variables like this:
@ -103,7 +96,7 @@ device:name {
 }
 ```

-the `name` can be easily obtained by doing `hyprctl devices`.
+The `name` can be easily obtained by doing `hyprctl devices`.

 Inside of it, put your config options. All options from the `input` category
 (and all subcategories, e.g. `input:touchpad`) can be put inside, **EXCEPT**:
@ -111,6 +104,7 @@ Inside of it, put your config options. All options from the `input` category
 force_no_accel, follow_mouse, float_switch_override_focus

 Properties that change names:
+
 ```plain
 touchdevice:transform -> touch_transform
 touchdevice:output -> touch_output
@ -126,14 +120,16 @@ device:ROYUAN Akko Multi-modes Keyboard-B {
 }
 ```

-*remember about the space after the end of the device's name (before the `{`)!*
+_remember about the space after the end of the device's name (before the `{`)!_

 {{< hint type=tip >}}
 With hyprctl, the category's spaces get turned into `-`, and everything is
 lowercase. So, for `hyprctl` calls, do for example:
+
 ```sh
 hyprctl keyword device:royuan-akko-multi-modes-keyboard-b:kb_layout us
 ```
+
 {{< /hint >}}

 # Wallpapers
@ -142,8 +138,9 @@ The hyprland background you see when you first start Hyprland is **NOT A
 WALLPAPER**, it's the default image rendered at the bottom of the render stack.

 To set a wallpaper, use a wallpaper utility like
-[hyprpaper](https://github.com/hyprwm/hyprpaper) or
-[swaybg](https://github.com/swaywm/swaybg).
+[hyprpaper](https://github.com/hyprwm/hyprpaper) or [swaybg](https://github.com/swaywm/swaybg). 
+
+More can be found in [Useful Utilities](../Useful-Utilities).

 # Blurring layerSurfaces

@ -159,7 +156,7 @@ blurls=NAMESPACE
 where `NAMESPACE` is the namespace of the layerSurface. (You can get it from
 `hyprctl layers`)

-to remove a namespace from being blurred (useful in dynamic situations) use:
+To remove a namespace from being blurred (useful in dynamic situations) use:

 ```ini
 blurls=remove,NAMESPACE
--- a/pages/Configuring/Master-Layout.md
+++ b/pages/Configuring/Master-Layout.md
@ -8,13 +8,13 @@ their size.

 ![master1](https://user-images.githubusercontent.com/43317083/179357849-321f042c-f536-44b3-9e6f-371df5321836.gif)

-You can, however, resize the master window.
+However, you can resize the master window.

 ![master2](https://user-images.githubusercontent.com/43317083/179357863-928b0b5a-ff10-4edc-aa76-3ff88c59c980.gif)

 # Config

-*category name `master`*
+_category name `master`_

 | name | description | type | default |
 |---|---|---|---|---|
@ -23,7 +23,7 @@ You can, however, resize the master window.
 | new_on_top | whether a newly open window should be on the top of the stack | bool | false |
 | no_gaps_when_only | whether to apply gaps when there is only one window on a workspace, aka. smart gaps. | bool | false |

-## Dispatchers
+# Dispatchers

 `layoutmsg` params:

@ -41,4 +41,5 @@ example usage:
 ```ini
 bind=MOD,KEY,layoutmsg,cyclenext
 ```
+
 {{< /hint >}}
--- a/pages/Configuring/Monitors.md
+++ b/pages/Configuring/Monitors.md
@ -1,10 +1,11 @@
-## Table of contents
+# Table of contents

 {{< toc format=html >}}

-## General
+# General

 The general config of a monitor looks like this
+
 ```ini
 monitor=name,resolution,offset,scale
 ```
@ -74,7 +75,7 @@ To disable a monitor, use
 monitor=name,disable
 ```

-## Custom reserved area
+# Custom reserved area

 If your workflow requires custom reserved area, you can add it with

@ -86,7 +87,7 @@ Where `TOP` `BOTTOM` `LEFT` `RIGHT` are integers in pixels of the reserved area
 to add. This does stack on top of the calculated one, (e.g. bars) but you may
 only use one of these rules per monitor in the config.

-## Mirrored displays
+# Mirrored displays

 If you want to mirror a display, add a `,mirror,[NAME]` at the end of the monitor
 rule, examples:
@ -101,12 +102,12 @@ second monitor, so if mirroring a 1080p screen onto a 4K one, the resolution
 will still be 1080p on the 4K display. This also means squishing and stretching
 will occur on non-matching resolutions.

-## Rotating and the default workspace
+# Rotating and the default workspace

 {{< hint type=important >}}

 The monitor transform and workspace keywords depend on a monitor rule set
-specifically for the targeted monitor, and ***MUST*** be after it.
+specifically for the targeted monitor, and **_MUST_** be after it.

 {{< /hint >}}

@ -142,15 +143,17 @@ flipped + 180 degrees -> 6
 flipped + 270 degrees -> 7
 ```

-## Binding workspaces to a monitor
+# Binding workspaces to a monitor

 A workspace can be bound to a monitor, meaning by default it will ALWAYS open
 on the selected monitor. You can do this with
+
 ```ini
 wsbind=WORKSPACE,MONITOR
 ```

 for example:
+
 ```ini
 wsbind=5,DP-1
 wsbind=name:secret,DP-2
--- a/pages/Configuring/Uncommon-tips-&-tricks.md
+++ b/pages/Configuring/Uncommon-tips-&-tricks.md
@ -1,4 +1,4 @@
-## Switchable keyboard layouts
+# Switchable keyboard layouts

 The easiest way to accomplish this is to set this using XKB settings, for example:
 ```
@ -16,7 +16,7 @@ For example: `us,ua` -> config binds would be e.g. `SUPER, A`, while on `ua,us`

 {{< /hint >}}

-## Disabling keybinds with one master keybind
+# Disabling keybinds with one master keybind

 If you want to disable all keybinds with another keybind (make a kaybind toggle
 of sorts) you can just use a submap with only a keybind to exit it.
--- a/pages/Configuring/Using-hyprctl.md
+++ b/pages/Configuring/Using-hyprctl.md
@ -8,11 +8,11 @@ the terminal.
 If it's not, go to the repo root and `/hyprctl`. Issue a `make all` and then
 `sudo cp ./hyprctl /usr/bin`.

-# Commands
+# Using Hyprctl

 {{< hint type=warning >}}

-*hyprctl* calls will be dispatched by the compositor *synchronously*,
+_hyprctl_ calls will be dispatched by the compositor _synchronously_,
 meaning any spam of the utility will cause slowdowns.
 It's recommended to use `--batch` for many control calls, and
 limiting the amount of info calls.
@ -21,7 +21,7 @@ For live event handling, see the [socket2](../../IPC/).

 {{< /hint >}}

-## Control
+## Commands

 ### Dispatch

@ -31,7 +31,7 @@ An arg has to be present, for dispatchers without parameters it can be anything.

 Examples:

-```
+```sh
 hyprctl dispatch exec kitty

 hyprctl dispatch pseudo x
@ -39,13 +39,15 @@ hyprctl dispatch pseudo x

 Returns: `ok` on success, an error message on fail.

+See [Dispatchers](./Dispatchers) for a list of dispatchers.
+
 ### Keyword

 issue a `keyword` to call a config keyword dynamically.

 Examples:

-```
+```sh
 hyprctl keyword bind SUPER,O,pseudo

 hyprctl keyword general:border_size 10
@ -73,13 +75,13 @@ params: theme and size

 e.g.:

-```
+```sh
 hyprctl setcursor Bibata-Modern-Classic 24
 ```

 ## Info

-```
+```sh
 version - prints the hyprland version, meaning flags, commit and branch of build.
 monitors - lists all the outputs with their properties
 workspaces - lists all workspaces with their properties
@ -97,22 +99,22 @@ You can also use `--batch` to specify a batch of commands to execute

 e.g.

-```
+```sh
 hyprctl --batch "keyword general:border_size 2 ; keyword general:gaps_out 20"
 ```

 `;` separates the commands

-# Flags
+## Flags

 You can specify flags for the request like this:

-```
+```sh
 hyprctl -j monitors
 ```

 flag list:

-```
+```txt
 j -> output in JSON
 ```
--- a/pages/Configuring/Variables.md
+++ b/pages/Configuring/Variables.md
@ -1,11 +1,10 @@
-For basic syntax info, see
-[Configuring Hyprland](../Configuring-Hyprland).
+For basic syntax info, see [Configuring Hyprland](../Configuring-Hyprland).

 This page documents all the "options" of Hyprland. For binds, monitors, animations,
 etc. see the sidebar. For anything else, see [Keywords](../Keywords).

 Please keep in mind some options that are layout-specific will be documented in
-the layout pages and not here. (See the Sidebar)
+the layout pages and not here. (See the Sidebar for Dwindle and Master layouts)

 # Variable types

@ -64,6 +63,7 @@ Prefer using `input:sensitivity` over `general:sensitivity` to avoid bugs, espec
 {{< /hint >}}

 ## Decoration
+
 | name | description | type | default |
 |---|---|---|---|---|
 | rounding | rounded corners' radius (in layout px) | int | 0 |
@ -103,7 +103,7 @@ Using `blur_new_optimizations` with an animated wallpaper may actually increase

 {{< /hint >}}

-## Animations
+# Animations

 | name | description | type | default |
 |---|---|---|---|---|
@ -115,6 +115,8 @@ _[More about Animations](../Animations)._

 {{< /hint >}}

+# Input
+
 ## Input

 | name | description | type | default |
@ -138,20 +140,21 @@ _[More about Animations](../Animations)._
 | scroll_method | set the libinput scroll method. Can be one of `2fg` (2 fingers), `edge`, `on_button_down`, `no_scroll`. | str | \[EMPTY\]

 {{< hint type=info >}}
-### Follow Mouse
+
+## Follow Mouse

 - 0 - disabled
 - 1 - full
 - 2 - loose. Will focus mouse on other windows on focus but not the keyboard.
 - 3 - full loose, will not refocus on click, but allow mouse focus to be
-detached from the keyboard like in 2.
-{{< /hint >}}
+  detached from the keyboard like in 2.
+  {{< /hint >}}

 {{< hint type=info >}}
 For switchable keyboard configs, take a look at [the uncommon tips & tricks page entry](../Uncommon-tips--tricks/#switchable-keyboard-layouts).
 {{< /hint >}}

-### Touchpad
+## Touchpad

 _Subcategory `input:touchpad:`_

@ -167,7 +170,8 @@ _Subcategory `input:touchpad:`_

 {{< hint type=important >}}
 A subcategory is a nested category:
-```
+
+```ini
 input {
    # ...
    # ...
@ -182,7 +186,7 @@ input {
 Doing `input:touchpad {` is **invalid**!
 {{< /hint >}}

-### Touchdevice
+## Touchdevice

 _Subcategory `input:touchdevice:`_

@ -191,11 +195,11 @@ _Subcategory `input:touchdevice:`_
 | transform | transform the input from touchdevices. The possible transformations are the same as [those of the monitors](../Monitors/#rotating-and-the-default-workspace) | int | 0 |
 | output | the output to bind touch devices. Empty means unset and will use the current / autodetected. | string | \[EMPTY\] |

-### Per-device input config
+## Per-device input config

 Described [here](../Keywords#per-device-input-configs).

-## Gestures
+# Gestures

 | name | description | type | default |
 |---|---|---|---|---|
@ -207,7 +211,7 @@ Described [here](../Keywords#per-device-input-configs).
 | workspace_swipe_cancel_ratio | (0.0 - 1.0) how much the swipe has to proceed in order to commence it. (0.7 -> if > 0.7 * distance, switch, if less, revert) | float | 0.5 |
 | workspace_swipe_create_new | whether a swipe right on the last workspace should create a new one. | bool | true |

-## Misc
+# Misc

 | name | description | type | default |
 |---|---|---|---|---|
@ -224,7 +228,7 @@ Described [here](../Keywords#per-device-input-configs).
 | swallow_regex | The *class* regex to be used for windows that should be swallowed (usually, a terminal) | str | \[EMPTY\] |
 | focus_on_activate | Whether Hyprland should focus an app that requests to be focused (an `activate` request) | bool | true |

-## Binds
+# Binds

 | name | description | type | default |
 |---|---|---|---|---|
@ -233,7 +237,7 @@ Described [here](../Keywords#per-device-input-configs).
 | workspace_back_and_forth | If enabled, an attempt to switch to the currently focused workspace will instead switch to the previous workspace. Akin to i3's *auto_back_and_forth*. | bool | false |
 | allow_workspace_cycles | If enabled, workspaces don't forget their previous workspace, so cycles can be created by switching to the first workspace in a sequence, then endlessly going to the previous workspace. | bool | false |

-## Debug
+# Debug

 {{< hint type=warning >}}

@ -248,7 +252,7 @@ Only for developers.
 | disable_logs | self-explanatory | bool | false |
 | disable_time | disables time logging | bool | true |

-## More
+# More

 There are more config options described in other pages, which are layout- or
 circumstance-specific. See the sidebar for more pages.
--- a/pages/Configuring/XWayland.md
+++ b/pages/Configuring/XWayland.md
@ -3,7 +3,7 @@ compositors.

 # HiDPI XWayland

-Currently, XWayland on HiDPI screens looks pixelated/blurry, due to Xorg's
+XWayland currently looks pixelated/blurry on HiDPI screens, due to Xorg's
 inability to scale.
 There are attempts to add a standard scaling mechanism, such as [MR 733](https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/733).

@ -17,25 +17,28 @@ and [Pacman patching](https://wiki.archlinux.org/title/Patching_packages).
 {{< /hint >}}

 1. Have the latest `xwayland` package patched with at least
-[the HiDPI patch](https://github.com/hyprwm/Hyprland/blob/main/nix/xwayland-hidpi.patch)
-(based on the MR's implementation, but updated).
+    [the HiDPI patch](https://github.com/hyprwm/Hyprland/blob/main/nix/xwayland-hidpi.patch)
+    (based on the MR's implementation, but updated).

 2. Make sure you have the required Hyprland `wlroots`, patched with
-[the HiDPI xwayland patch](https://gitlab.freedesktop.org/lilydjwg/wlroots/-/commit/6c5ffcd1fee9e44780a6a8792f74ecfbe24a1ca7)
-and [this commit](https://gitlab.freedesktop.org/wlroots/wlroots/-/commit/18595000f3a21502fd60bf213122859cc348f9af)
-**reverted**. This is important, as not reverting it will make opening XWayland
-programs crash Hyprland.
+    [the HiDPI xwayland patch](https://gitlab.freedesktop.org/lilydjwg/wlroots/-/commit/6c5ffcd1fee9e44780a6a8792f74ecfbe24a1ca7)
+    and [this commit](https://gitlab.freedesktop.org/wlroots/wlroots/-/commit/18595000f3a21502fd60bf213122859cc348f9af)
+    **reverted**. This is important, as not reverting it will make opening XWayland
+    programs crash Hyprland.

 3. Add this line to your configuration:
+
    ```ini
    exec-once=xprop -root -f _XWAYLAND_GLOBAL_OUTPUT_SCALE 32c -set _XWAYLAND_GLOBAL_OUTPUT_SCALE 2
    ```
+
    and configure toolkits to scale using their specific mechanisms, such as
+
    ```sh
    export GDK_SCALE=2
    export XCURSOR_SIZE=32
    ```

    {{< hint >}}
-The GDK_SCALE variable won't conflict with wayland-native GTK programs.
+    The GDK_SCALE variable won't conflict with wayland-native GTK programs.
    {{< /hint >}}
--- a/Debugging/PR-Guidelines.md
+++ b/Debugging/PR-Guidelines.md
@ -1,12 +1,13 @@
-## PR Requirements
+# PR Requirements

 - Clean, not hacky code
- Described changes and *why* they were there
+- Described changes and _why_ they were there
 - Following the style (see below)

 ## Code Style

 Hyprland's code style:
+
 ```cpp
 void myFunction(int arg) {

@ -58,7 +59,9 @@ public:
 > Why is the config variable getting so weird?

 Every variable from the config needs to be found in a hashmap. To limit the amount of hashmap searches, getting a config option looks like this:
+
 ```cpp
 static auto *const PFOLLOWMOUSE = &g_pConfigManager->getConfigValuePtr("input:follow_mouse")->intValue;
 ```
-Since the hashmap *cannot* be mutated during runtime, this pointer will always be valid, and will not require hashmap lookups every single time it's read.
+
+Since the hashmap _cannot_ be mutated during runtime, this pointer will always be valid, and will not require hashmap lookups every single time it's read.
--- a/Debugging/_index.md
+++ b/Debugging/_index.md
@ -5,21 +5,21 @@ PR, code styling and code FAQs are [here](./PR-Guidelines)
 For issues, please see
 [the guidelines](https://github.com/hyprwm/Hyprland/blob/main/docs/ISSUE_GUIDELINES.md)

-# Build in debug mode
+## Build in debug mode

-## Required packages
+### Required packages

 `xcb` stuff, check with your local package provider.

 `wayland` - of course.

-*Arch*:
+_Arch_:

 `yay -S gdb ninja gcc cmake libxcb xcb-proto xcb-util xcb-util-keysyms libxfixes libx11 libxcomposite xorg-xinput libxrender pixman wayland-protocols cairo pango seatd`

 (If any are missing hmu)

-## Recommended, CMake
+### Recommended, CMake

 Install the VSCode C/C++ and CMake Tools extensions and use that.

@ -29,7 +29,7 @@ that you can copy to your .vscode/ folder in the repo root.
 With that, you can build in debug, go to the debugging tab and hit
 `(gdb) Launch`.

-## Custom, CLI
+### Custom, CLI

 `make debug`

@ -48,22 +48,22 @@ meaning you'll be unable to build any other wlroots compositor
 without a wlroots reinstall.
 {{< /hint >}}

-# Running
+## Running

 when running Hyprland in Debug mode, the config is
 `~/.config/hypr/hyprlandd.conf` and the logs can be found at
 `/tmp/hypr/[INSTANCE SIGNATURE]/hyprlandd.conf`.

-# Logs, dumps, etc.
+## Logs, dumps, etc

 You can use the logs and the GDB debugger, but running Hyprland in debug compile
 as a driver and using it for a while might give more insight to the more random
 bugs.

 When Hyprland crashes, use `coredumpctl` and then `coredumpctl info PID` to see
-the dump.
+the dump. See the instructions below for more info about `coredumpctl`.

-I also recommend the amazing command
+You can also use the amazing command

 ```sh
 watch -n 0.1 "cat /tmp/hypr/$(echo HYPRLAND_INSTANCE_SIGNATURE)/hyprland.log | grep -v \"arranged\" | tail -n 40"
@ -71,7 +71,11 @@ watch -n 0.1 "cat /tmp/hypr/$(echo HYPRLAND_INSTANCE_SIGNATURE)/hyprland.log | g

 for live logs. (replace `hyprland` with `hyprlandd` for debug builds)

-# Nesting Hyprland
+### How do I get a coredump?
+
+See [`ISSUE_GUIDELINES.md`](https://github.com/hyprwm/Hyprland/blob/main/docs/ISSUE_GUIDELINES.md).
+
+## Nesting Hyprland

 Hyprland can run nested in a window. For that, make sure you did the following:

@ -79,8 +83,7 @@ Hyprland can run nested in a window. For that, make sure you did the following:
 - removed ALL `exec=` and `exec-once=` keywords from your debug config
  (`hyprlandd.conf`)
 - set a resolution and are not using `preferred`
- made sure no keybinds overlap (I recommend using a different mod for your
-  keybinds altogether)
+- made sure no keybinds overlap (use a different mod for your keybinds altogether)

 Once you launch, the display will probably be completely garbled. To fix that,
 in the parent, do a `hyprctl clients` and note the size of the window. Make sure
--- a/Bugs/_index.md
+++ b/Bugs/_index.md
@ -1,4 +1,4 @@
-## Getting the log
+# Getting the log

 If you are in a TTY, and the hyprland session that crashed was the last one you
 launched, the log will be printed with
@ -15,7 +15,7 @@ if you are in a Hyprland session, and you want the log of the last session, use
 cat /tmp/hypr/$(ls -t /tmp/hypr/ | head -n 2 | tail -n 1)/hyprland.log
 ```

-## Crashes at launch
+# Crashes at launch

 Diagnose the issue by what is in the log:

@ -31,14 +31,13 @@ Diagnose the issue by what is in the log:
  in the first point.
 - failing on `Hyprland` -> report an issue.

-## Crashes not at launch
+# Crashes not at launch

 Report an issue on GitHub or on the Discord server.

-## Bugs
+# Bugs

-First of all, ***READ THE
-[FAQ PAGE](../FAQ)***
+First of all, **_READ THE [FAQ PAGE](../FAQ)_**

 If your bug is not listed there, you can ask on the Discord server or open an
 issue on GitHub.
--- a/Started/Installation.md
+++ b/Started/Installation.md
@ -5,14 +5,14 @@ Hyprland. If you want to try Hyprland on Nvidia regardless
 (many people have reported successes), follow the [Nvidia page](../../Nvidia)
 after installing Hyprland.

-### Distros
+## Distros

 Arch, NixOS and openSUSE Tumbleweed are very supported. For any other distro
 (not based on Arch/Nix) you might have varying amounts of success. However,
 since Hyprland is extremely bleeding-edge, distros like Pop!\_OS, Ubuntu, etc.
 might have **major** issues running Hyprland.

-# Installation
+## Installation

 Installing Hyprland is very easy. Either you install it from your local package
 provider (if they provide pkgs for Hyprland) or you install/build it yourself.
@ -24,21 +24,20 @@ consider updating your packages with `yay -Syu --devel`, or your other preferred
 package manager.
 {{< /hint >}}

-## Packages
+### Packages

 **WARNING:** I do not maintain any packages. If they are broken, try building
 from source first.

 {{< tabs "uniqueid" >}}

-{{< tab "Arch Linux" >}} *If you're on Arch Linux, I* ***heavily*** *recommend
-you use the AUR.*
+{{< tab "Arch Linux" >}} _If you're on Arch Linux, I_ **_heavily_** _recommend
+you use the AUR._

 ```plain
 hyprland-git - compiles from latest source
 hyprland - compiles from latest release source
 hyprland-bin - compiled latest release, prone to breaking on ARM devices as Hyprland binary is compiled for x86
-
 ```

 {{< /tab >}}
@ -56,7 +55,7 @@ opi hyprland
 Alternatively, you can also follow the instructions under ["Manual (Manual Build)"](#manual-manual-build)
 to build Hyprland yourself.

-Note: *Hyprland is not available for Leap, as most libraries (and compiler) that Hyprland needs are too old.*
+Note: _Hyprland is not available for Leap, as most libraries (and compiler) that Hyprland needs are too old._
 {{< /tab >}}
 {{< tab "Fedora" >}}<https://github.com/hyprwm/Hyprland/discussions/284>{{< /tab >}}
 {{< tab "Gentoo" >}}
@ -71,7 +70,7 @@ emerge --ask --verbose hyprland

 {{< /tabs >}}

-## Manual (Releases)
+### Manual (Releases)

 Download the most recent release.

@ -89,17 +88,17 @@ the example config is in `examples/Hyprland.conf`.
 For updating later on, you can overwrite the binaries (hyprctl, hyprland and
 libwlroots), you don't need to update anything else.

-## Manual (Manual Build)
+### Manual (Manual Build)

-*Arch dependencies*:
+_Arch dependencies_:

 ```plain
 yay -S gdb ninja gcc cmake libxcb xcb-proto xcb-util xcb-util-keysyms libxfixes libx11 libxcomposite xorg-xinput libxrender pixman wayland-protocols cairo pango seatd
 ```

-(If any are missing hmu)
+_(If any are missing, hmu)_

-*openSUSE dependencies*:
+_openSUSE dependencies_:

 ```sh
 zypper in gcc-c++ git meson cmake "pkgconfig(cairo)" "pkgconfig(egl)" "pkgconfig(gbm)" "pkgconfig(gl)" "pkgconfig(glesv2)" "pkgconfig(libdrm)" "pkgconfig(libinput)" "pkgconfig(libseat)" "pkgconfig(libudev)" "pkgconfig(pango)" "pkgconfig(pangocairo)" "pkgconfig(pixman-1)" "pkgconfig(vulkan)" "pkgconfig(wayland-client)" "pkgconfig(wayland-protocols)" "pkgconfig(wayland-scanner)" "pkgconfig(wayland-server)" "pkgconfig(xcb)" "pkgconfig(xcb-icccm)" "pkgconfig(xcb-renderutil)" "pkgconfig(xkbcommon)" "pkgconfig(xwayland)" glslang-devel Mesa-libGLESv3-devel "pkgconfig(xcb-errors)"
@ -119,13 +118,15 @@ that (`gcc>=12.1.0` or `clang>=15`)
 ```Plain
 git clone --recursive https://github.com/hyprwm/Hyprland
 cd Hyprland
-sudo make install 
+sudo make install
 ```

-Do note that `sudo make install` will copy the example .desktop file to `/usr/share/wayland-sessions/` directory,
-promptly overriding the existent .desktop file from previous installations.
+Do note that `sudo make install` will copy the example .desktop file to
+`/usr/share/wayland-sessions/` directory, promptly overriding the existent
+.desktop file from previous installations.

-It's probably a good idea to run `sudo make cleaninstall` to update Hyprland later on, as it does not overwrite the desktop file.
+It's probably a good idea to run `sudo make cleaninstall` to update Hyprland later on,
+as it will not overwrite the desktop file.

 ### Meson

@ -152,7 +153,7 @@ for legacy renderer:
 sudo make clear && sudo make config && make legacyrenderer && sudo cp ./build/Hyprland /usr/bin && sudo cp ./example/hyprland.desktop /usr/share/wayland-sessions
 ```

-*please note the legacy renderer may not support some graphical features.*
+_please note the legacy renderer may not support some graphical features._
 <br/><br/> Any other config: (replace \[PRESET\] with your preset, `release`
 `debug` `legacyrenderer` `legacyrendererdebug`)

@ -205,7 +206,7 @@ Now, of course, install manually.
 sudo cp ./build/Hyprland /usr/bin && sudo cp ./example/hyprland.desktop /usr/share/wayland-sessions
 ```

-# Launching
+## Launching

 You can launch Hyprland by either going into a TTY and executing `Hyprland`, or
 with a login manager.
--- a/Started/Quick-start.md
+++ b/Started/Quick-start.md
@ -1,9 +1,9 @@
-After you've installed Hyprland, you can either launch it from a TTY with
+After you have installed Hyprland, you can either launch it from a TTY with
 `Hyprland` or from a login manager. Although login managers aren't officially
-supported, I recommend `SDDM`, as it's been working flawlessly with wayland
+supported, you might want to use `SDDM`, as it's been working flawlessly with wayland
 compositors.

-It is recommended you have `kitty` for terminal access, (example and
+It is recommended you have `kitty` installed for terminal access, (example and
 autogenerated configs have it bound to <kbd>SUPER</kbd> + <kbd>Q</kbd>).
 Alternatively, manually change it in the config before launching Hyprland.

@ -45,7 +45,7 @@ exec Hyprland
 ```

 You can add as many exported envvars as you need (Nvidia users might need a
-lot), but I recommend having *at least* the shown two.
+lot), but it's recommended to have _at least_ the shown two.

 You should now launch Hyprland with `wrappedhl` instead of `Hyprland`. Make sure
 to copy your `.desktop` file in `/usr/share/wayland-sessions/` and edit it if you use a
@ -55,26 +55,21 @@ usually not ran through the user account.
 {{< hint type=important >}}
 It is highly recommended to copy the desktop file to e.g. `wrapped_hl.desktop` instead of editing
 the provided one, as many package managers (and `sudo make install`) will **overwrite**
-the desktop file on updates.
+the desktop file on updates. If you manually build Hyprland, consider using `sudo make cleaninstall` to preserve `hyprland.deskop`
 {{< /hint >}}

-## Immediate
+# Immediate

 **OMG MY SCREEN IS BROKEN, FLASHY TEARY!** -> see the bottom of this page

 Once you log in, you'll be greeted with a yellow warning that will give you some
-basic keybind info of your pregenerated config.
+basic keybind info of your pre-generated config.

-I recommend you use the config provided in `examples/hyprland.conf` though.
+To make the warning to go away, remove the `autogenerated=1` line from hyprland.conf

-Paste it into `~/.config/hypr/hyprland.conf`
+# Monitors

-You can, of course, start from the pregenerated config if you wish to. If you
-want the warning to go away, remove the `autogenerated=1` line.
-
-## Monitors
-
-Use `hyprctl monitors` to list available outputs. `hyprctl` will *not* tell you
+Use `hyprctl monitors` to list available outputs. `hyprctl` will _not_ tell you
 what your monitor is capable of though, so if you want to check your resolution / refresh rate,
 use a tool like `wlr-randr`.

@ -109,18 +104,19 @@ Head onto the
 [Configuring Hyprland page](../../Configuring/Configuring-Hyprland) to learn all
 about configuring Hyprland to your likings.

-# Apps / X11 replacements
+## Apps / X11 replacements

 See the [Useful Utilities page](../../Useful-Utilities) and the
 [Sway wiki page](https://github.com/swaywm/sway/wiki/Useful-add-ons-for-sway)
 just about that.

-# Screenshare / GTK slow launch issues
+## Screenshare / GTK slow launch issues
+
 [FAQ (GTK issue)](../../FAQ/#some-of-my-apps-take-a-really-long-time-to-open)

 [FAQ (screensharing)](../../FAQ/#screenshare--obs-no-worky)

-# Screen broken on launch
+## Screen broken on launch

 This usually happens due to your monitor not being very happy about the default
 settings.
--- a/pages/Home.md
+++ b/pages/Home.md
@ -6,9 +6,11 @@ Take a tour of the pages on the left and read ones that you may need.

 ## Wayland info (especially useful for Xorg users)

-A Wayland compositor is a fully autonomous Display Server, like Xorg itself. 
+A Wayland compositor is a fully autonomous Display Server, like Xorg itself.
 It is **not** possible to mix'n'match Wayland compositors like you could on Xorg
-with window managers and compositors.
+with window managers and compositors. It is also not entirely possible, nor recommended,
+to try and use all Xorg applications on Wayland. See [../Useful-Utilities](this page) for a
+list of recommended Wayland native/compatible programs.

 Wayland **compositors** should not be confused with Xorg **window managers**.

--- a/pages/IPC/_index.md
+++ b/pages/IPC/_index.md
@ -1,7 +1,7 @@
 Hyprland exposes 2 UNIX Sockets, for controlling / getting info about Hyprland
 via code / bash utilities.

-## Hyprland Instance Signature (HIS)
+# Hyprland Instance Signature (HIS)

 ```sh
 echo $HYPRLAND_INSTANCE_SIGNATURE
@ -24,7 +24,7 @@ this:

 e.g.: `workspace>>2`

-## Events list:
+# Events list

 | name | description | data |
 | --- | --- | --- |
@ -51,7 +51,7 @@ A window might do for example 3 requests to be fullscreen'd, which would result
 in 3 fullscreen events.
 {{< /hint >}}

-## How to use socket2 with bash
+# How to use socket2 with bash

 example script using socket2 events with bash and `socat`:

--- a/pages/Nix/_index.md
+++ b/pages/Nix/_index.md
@ -1,4 +1,5 @@
-## Table of contents
+# Table of contents
+
 {{< toc format=html >}}

 {{< hint type=warning >}}
@ -7,12 +8,15 @@ work as intended. Please use the
 [flake](https://github.com/hyprwm/Hyprland/blob/main/flake.nix).
 {{< /hint >}}

-## Install and configure Hyprland on NixOS
+# Install and configure Hyprland on NixOS

 Make sure to check out the options of the
 [Nix module](https://github.com/hyprwm/Hyprland/blob/main/nix/module.nix).

-### With flakes
+Do note that the Nixpkgs Hyprland package is not actively maintained, and may be outdated.
+As such, installation using the Flake is recommended.
+
+## With flakes

 ```nix
 # flake.nix
@ -30,7 +34,7 @@ Make sure to check out the options of the
    nixosConfigurations.HOSTNAME = nixpkgs.lib.nixosSystem {
      # ...
      modules = [
-        hyprland.nixosModules.default 
+        hyprland.nixosModules.default
        { programs.hyprland.enable = true; }
        # ...
      ];
@ -40,7 +44,7 @@ Make sure to check out the options of the

 Don't forget to replace `HOSTNAME` with your hostname!

-### Without flakes
+## Without flakes

 {{< hint >}}
 If you're using Hyprland through an overlay, set
@ -58,7 +62,7 @@ in {
  imports = [
    hyprland.nixosModules.default
  ];
-  
+
  programs.hyprland = {
    enable = true;
    package = hyprland.packages.${pkgs.system}.default;
@ -66,11 +70,11 @@ in {
 }
 ```

-## Install and configure through Home Manager
+# Install and configure through Home Manager

 You can use the Home Manager module by adding it to your configuration:

-### With flakes
+## With flakes

 ```nix
 # flake.nix
@ -92,7 +96,7 @@ You can use the Home Manager module by adding it to your configuration:
    homeConfigurations."USER@HOSTNAME"= home-manager.lib.homeManagerConfiguration {
      pkgs = nixpkgs.legacyPackages.x86_64-linux;
      modules = [
-        hyprland.homeManagerModules.default 
+        hyprland.homeManagerModules.default
        { wayland.windowManager.hyprland.enable = true; }
        # ...
      ];
@ -102,7 +106,7 @@ You can use the Home Manager module by adding it to your configuration:

 Don't forget to replace `USER@HOSTNAME` with your username and hostname!

-### Without flakes
+## Without flakes

 ```nix
 # home config
@ -124,60 +128,66 @@ in {
 For a list of available options, check the
 [module file](https://github.com/hyprwm/Hyprland/blob/main/nix/hm-module.nix).

-## Modules mix'n'match
+# Modules mix'n'match

 - If you plan on using the HM module alongside the NixOS module, set the NixOS
-`programs.hyprland.package = null;`.
+  `programs.hyprland.package = null;`.

 - If you don't plan on using the NixOS module, but want to use the HM module, you
-will have to enable all the options the NixOS module enables.
+  will have to enable all the options the NixOS module enables.

 - If you don't plan on using any module, manually enable whatever options the
-modules set.
+  modules set.

-## Non-NixOS install
+# Non-NixOS install

-### With flakes
+## With flakes

 First, [enable flakes](https://nixos.wiki/wiki/Flakes#Enable_flakes).

 Once you have flakes working, install Hyprland through `nix profile`:

 ```sh
-$ nix profile install github:hyprwm/Hyprland
+nix profile install github:hyprwm/Hyprland
 ```

 Since you're using Hyprland outside of NixOS, it won't be able to find graphics
 drivers. To get around that, you can use [nixGL](https://github.com/guibou/nixGL).

 First, install it, in the same manner you installed Hyprland:
+
 ```sh
-$ nix profile install github:guibou/nixGL --impure
+nix profile install github:guibou/nixGL --impure
 ```
+
 Impure is needed due to `nixGL`'s reliance on hardware information.

 From now on, you can run Hyprland by invoking it with nixGL
+
 ```sh
-$ nixGL Hyprland
+nixGL Hyprland
 ```
+
 or by creating a wrapper script that runs the above command inside.

-### Upgrading
+## Upgrading

 In order to upgrade all your packages, you can run
+
 ```sh
-$ nix profile upgrade '.*'
+nix profile upgrade '.*'
 ```
+
 Check the
 [nix profile](https://nixos.org/manual/nix/stable/command-ref/new-cli/nix3-profile.html)
 command documentation for other upgrade options.

-## XWayland
+# XWayland

 XWayland is enabled by default in the Nix package. You can disable it either
 in the package itself, or through the Home Manager module.

-#### Package
+## Package

 ```nix
 (inputs.hyprland.packages.${pkgs.default}.default.override {
@ -185,7 +195,7 @@ in the package itself, or through the Home Manager module.
 })
 ```

-#### HM module
+### HM module

 ```nix
 wayland.windowManager.hyprland = {
@ -194,7 +204,7 @@ wayland.windowManager.hyprland = {
 }
 ```

-### HiDPI
+## HiDPI

 By default, the Nix package includes a patched wlroots that can render HiDPI
 XWayland windows.
@ -221,12 +231,12 @@ The GDK_SCALE variable won't conflict with wayland-native GTK programs.
 Usually, there's no reason to disable this functionality, as it won't affect
 people who don't have HiDPI screens.

-If you *do* insist on disabling it though (e.g. for adding your own patches
+If you _do_ insist on disabling it though (e.g. for adding your own patches
 to wlroots), you can do so by either using the `hyprland-no-hidpi` package,
 or by passing the `hidpiXWayland = false;` flag, the same way as
 [disabling XWayland](#package)

-## Cachix
+# Cachix

 A [Hyprland Cachix](https://app.cachix.org/cache/hyprland) exists to cache the
 `wlroots` package and speed up builds.
@ -244,7 +254,7 @@ this cache to download the binary directly, instead of building locally.
 }
 ```

-## Overrides
+# Overrides

 You can override the package through `.override` or `.overrideAttrs`. This is
 easily achievable through NixOS or Home Manager.
--- a/pages/Nvidia/_index.md
+++ b/pages/Nvidia/_index.md
@ -1,4 +1,4 @@
-## Foreword
+# Foreword

 There is no _official_ support for Nvidia. Unfortunately, their drivers are so
 messy, and their products so random, that it's impossible for us to help if
@ -16,7 +16,7 @@ parameters. Follow the information available here:

 in `/etc/mkinitcpio.conf` add `nvidia nvidia_modeset nvidia_uvm nvidia_drm` to your `MODULES`

-run `#  mkinitcpio --config /etc/mkinitcpio.conf --generate /boot/initramfs-custom.img`
+run `# mkinitcpio --config /etc/mkinitcpio.conf --generate /boot/initramfs-custom.img`

 add a new line to `/etc/modprobe.d/nvidia.conf` (make it if it does not exist) and add the line `options nvidia-drm modeset=1`

@ -46,9 +46,11 @@ Launch Hyprland with the wrapper.

 It _should_ work now.

-### Fixing random flickering, method 1
+## Fixing random flickering, method 1
+
 If you take a look at the wlroots patches in the [nix flake](https://github.com/hyprwm/Hyprland/blob/main/nix/wlroots.nix)
 you will find a one-line patch:
+
 ```sh
 substituteInPlace render/gles2/renderer.c --replace "glFlush();" "glFinish();"
 ```
@ -57,7 +59,7 @@ What this means, for non-nix users, is you have to (before building) go to
 `subprojects/wlroots/render/gles2/renderer.c` and replace all occurrences of `glFlush()`
 with `glFinish()`, and then compile Hyprland as usual.

-### Fixing random flickering, method 2 (nuclear)
+## Fixing random flickering, method 2 (nuclear)

 Do note though that this forces performance mode to be active, resulting in
 increased power-consumption (from 22W idle on a RTX 3070TI, to 74W).
--- a/Utilities/Color-Pickers.md
+++ b/Utilities/Color-Pickers.md
@ -1,7 +1,8 @@
-Color pickers are useful for quickly grabbing a color of *something* on your screen.
+Color pickers are useful for quickly grabbing a color of _something_ on your screen.

-We recommend our own solution, which, so far, seems to be the only one that doesn't suck.
+It's preferred using _hyrpwm_'s own solution, which, so far, seems to be the only one that 
+doesn't suck.

 ## Hyprpicker

-Dead simple to use. Launch, click, and you're done. [GitHub](https://github.com/hyprwm/hyprpicker)
+Dead simple to use. Launch, click, and you're done. [GitHub](https://github.com/hyprwm/hyprpicker)
--- a/Utilities/Screen-Sharing.md
+++ b/Utilities/Screen-Sharing.md
@ -1,6 +1,6 @@
 Screensharing is done through PipeWire on Wayland.

-## Prereqs
+## Prerequsities

 Make sure you have `pipewire` and `wireplumber` installed, enabled and running
 if you don't have them yet.
--- a/Utilities/Status-Bars.md
+++ b/Utilities/Status-Bars.md
@ -1,30 +1,25 @@
-Launch your bar with `exec-once=`.
-
-## Waybar
+# Waybar

 Waybar is a GTK status bar made specifically for wlroots compositors.

-To use it, it's recommended to use the AUR package `waybar-hyprland-git`,
-or compile manually with the `USE_EXPERIMENTAL` flag enabled.
+To use it, it's recommended to use the AUR package `waybar-hyprland-git`.
+
+## Compiling Manually

 To compile manually:

 Clone the source, cd into it, then do:

-```sh
+```bash
 sed -i 's/zext_workspace_handle_v1_activate(workspace_handle_);/const std::string command = "hyprctl dispatch workspace " + name_;\n\tsystem(command.c_str());/g' src/modules/wlr/workspace_manager.cpp
-
 meson --prefix=/usr --buildtype=plain --auto-features=enabled --wrap-mode=nodownload build
 meson configure -Dexperimental=true build
-```
-
-and finally:
-
-```sh
 sudo ninja -C build install
 ```

-If you want to use the workspaces module, it's called `wlr/workspaces`.
+If you want to use the workspaces module, first, copy the configuration files from
+`/etc/xdg/waybar/` into `~/.config/waybar/`. Then, in `~/.config/waybar/conf/` replace
+all the references to `sway/workspaces/` with `wlr/workspaces`.

 For more info regarding configuration, see
 [The Waybar Wiki](https://github.com/Alexays/Waybar/wiki).
@ -36,11 +31,11 @@ it, either using your distro's package manager, by searching `eww-wayland`, or
 by manually compiling. In the latter case, you can follow the
 [instructions](https://elkowar.github.io/eww).

-### Configuration
+## Configuration

 After you've successfully installed Eww, you can move onto configuring it. There
-are a few examples listed in the [Readme](https://github.com/elkowar/eww). We
-highly recommend you also read through the
+are a few examples listed in the [Readme](https://github.com/elkowar/eww). It's also
+highly recommended to read through the
 [Configuration options](https://elkowar.github.io/eww/configuration.html).

 {{< hint type=important >}}
--- a/Utilities/Wallpapers.md
+++ b/Utilities/Wallpapers.md
@ -25,5 +25,5 @@ A neat mpv wrapper to play a video as your wallpaper.
 ## swww

 An efficient animated wallpaper daemon for wayland, controlled at runtime,
-which means you can change wallpapers without even needing to restart. 
+which means you can change wallpapers without even needing to restart.
 [GitHub](https://github.com/Horus645/swww)
--- a/Utilities/_index.md
+++ b/Utilities/_index.md
@ -1,7 +1,7 @@
 This category is dedicated to short tutorials on how to get useful utilities for
 Hyprland working.

-## List of Pages
+# List of Pages

 - **[Status Bars](./Status-Bars)**