various aquamarine stuff (#721)

* aq

* nv cursors

* list aq dep

* thanks fuf

Co-authored-by: Mihai Fufezan <fufexan@protonmail.com>

* thanks ikalco

---------

Co-authored-by: Mihai Fufezan <fufexan@protonmail.com>

pages/Configuring/Environment-variables.md

@@ -35,7 +35,7 @@ environment on traditional Linux distros.
 
 ## Hyprland Environment Variables
 
-- `HYPRLAND_LOG_WLR=1` - Enables more verbose logging of wlroots.
+- `HYPRLAND_TRACE=1` - Enables more verbose logging.
 - `HYPRLAND_NO_RT=1` - Disables realtime priority setting by Hyprland.
 - `HYPRLAND_NO_SD_NOTIFY=1` - If systemd, disables the `sd_notify` calls.
 
@@ -98,8 +98,8 @@ To force GBM as a backend, set the following environment variables:
 - `__GL_VRR_ALLOWED` - Controls if Adaptive Sync should be used. Recommended to
   set as "0" to avoid having problems on some games.
 
-- `env = WLR_DRM_NO_ATOMIC,1` - use legacy DRM interface instead of atomic mode
-  setting. Might fix flickering issues.
+- `env = AQ_NO_ATOMIC,1` - use legacy DRM interface instead of atomic mode
+  setting. **NOT** recommended.
 
 ## Theming Related Variables
 

pages/Configuring/Multi-GPU.md

@@ -46,7 +46,7 @@ boot and is subject to frequent change, making it unsuitable as a marker for GPU
 
 After determining which "card" belongs to which GPU, we now have to tell
 Hyprland the GPU we want to use primarily.
-This is done by setting the `WLR_DRM_DEVICES` environment variable.
+This is done by setting the `AQ_DRM_DEVICES` environment variable.
 
 {{< callout type=info >}}
 
@@ -59,34 +59,34 @@ with lower and higher power rating GPUs respectively.
 {{< /callout >}}
 
 If you wish to use the integrated GPU to run Hyprland, no further action is
-required. wlroots will set `WLR_DRM_DEVICES` to the integrated GPU by default.
+required. Aquamarine will set `AQ_DRM_DEVICES` to the integrated GPU by default.
 
 If instead you would like to use another GPU, you must first create a symlink to
 the card from the previous section.
 
-It is not possible to use `~/.config/hypr/card` as wlroots will not expand it correctly.  
+It is not possible to use `~/.config/hypr/card` as aquamarine will not expand it correctly.  
 You must include full path e.g `$HOME/.config/hypr/card`
 ```
 ln -sf /dev/dri/by-path/pci-0000:06:00.0-card $HOME/.config/hypr/card
 ```
 
 It is not possible to directly use the `/dev/dri/by-path/pci-0000:06:00.0-card` path,
-as wlroots interprets the colon symbols in the path as separators. Escaping
+as aquamarine interprets the colon symbols in the path as separators. Escaping
 characters will not rectify this.
 
-Afterwards, you must set the `WLR_DRM_DEVICES` environment variable in
+Afterwards, you must set the `AQ_DRM_DEVICES` environment variable in
 hyprland.conf to this linked card.
 
 
 ```ini
-env = WLR_DRM_DEVICES,$HOME/.config/hypr/card
+env = AQ_DRM_DEVICES,$HOME/.config/hypr/card
 ```
 
 If you want to set a sequence of fallback cards, symlink another card and set
 the var as a colon separated list in order of priority.
 
 ```ini
-env = WLR_DRM_DEVICES,$HOME/.config/hypr/card:$HOME/.config/hypr/otherCard
+env = AQ_DRM_DEVICES,$HOME/.config/hypr/card:$HOME/.config/hypr/otherCard
 ```
 
 Here, we tell Hyprland to set priorities. If `card` isn't available for

pages/Configuring/Tearing.md

@@ -10,8 +10,6 @@ Screen tearing is used to reduce latency and/or jitter in games.
 To enable tearing:
 
 - Set `general:allow_tearing` to `true`. This is a "master toggle"
-- Add `env = WLR_DRM_NO_ATOMIC,1` to your Hyprland config. This disables the
-  usage of a newer kernel DRM API that doesn't support tearing yet.
 - Add an `immediate` windowrule to your game of choice. This makes sure that
   Hyprland will tear it.
 
@@ -29,22 +27,9 @@ general {
     allow_tearing = true
 }
 
-env = WLR_DRM_NO_ATOMIC,1
-
 windowrulev2 = immediate, class:^(cs2)$
 ```
 
-{{< callout >}}
-
-`env = WLR_DRM_NO_ATOMIC,1` is not recommended. If your kernel ver is >= 6.8,
-you can remove it.
-
-For kernels < 6.8, this env is required.
-
-Check your kernel version with `uname -r`.
-
-{{< /callout >}}
-
 {{< callout type=warning >}}
 
 If you experience graphical issues, you may be out of luck. Tearing support is
@@ -66,8 +51,7 @@ monitor is fine)
 
 ### Apps that should tear, freeze
 
-Almost definitely means your GPU driver does not support tearing, like e.g.
-Intel's, or AMD if you don't use the legacy backend with `env = WLR_DRM_NO_ATOMIC,1` or patch your kernel.
+Almost definitely means your GPU driver does not support tearing.
 
 Please _do not_ report issues if this is the culprit.
 
@@ -77,13 +61,3 @@ Likely issue with your graphics driver.
 
 Please _do not_ report issues if this is the culprit. Unfortunately, it's most
 likely your GPU driver's fault.
-
-### Other graphical issues/Hyprland instantly crashes on launch
-
-Likely issue with `WLR_DRM_NO_ATOMIC`.
-
-NO_ATOMIC forces the use of a legacy, less tested drm API.
-
-Please _do not_ report issues if this is the culprit. Unfortunately, you will
-have to wait for the Linux kernel to support tearing page flips on the atomic
-API.

pages/Configuring/Variables.md

@@ -426,6 +426,7 @@ _Subcategory `group:groupbar:`_
 | enable_hyprcursor | whether to enable hyprcursor support | bool | true |
 | hide_on_key_press | Hides the cursor when you press any key until the mouse is moved. | bool | false |
 | hide_on_touch | Hides the cursor when the last input was a touch input until a mouse input is done. | bool | false |
+| allow_dumb_copy | Makes HW cursors work on Nvidia, at the cost of a possible hitch whenever the image changes | bool | false |
 
 ### Debug
 

pages/Crashes and Bugs/_index.md

@@ -33,16 +33,13 @@ Attach that file to your issue.
 
 Diagnose the issue by what is in the log:
 
-- `sWLRBackend was NULL!` -> launch in the TTY and refer to the wlr logs in RED.
+- `backend failed to start` -> launch in the TTY and refer to the logs in RED.
 - `Monitor X has NO PREFERRED MODE, and an INVALID one was requested` -> your
   monitor is bork.
 - Other -> see the coredump. Use `coredumpctl`, find the latest one's PID and do
   `coredumpctl info PID`.
 - failing on a driver (e.g. `radeon`) -> try compiling with
   `make legacyrenderer`, if that doesn't help, report an issue.
-- failing on `wlr-xxx` -> try compiling with `make legacyrenderer`, if that
-  doesn't help, report an issue, and also refer to the TTY wlr logs in RED like
-  in the first point.
 - failing on `Hyprland` -> report an issue.
 
 ## Crashes not at launch

pages/FAQ/_index.md

@@ -39,7 +39,7 @@ Outside those, there is a way to fix it that _might_ work for you though:
 
 **Option 1:** Use _only_ the external monitor
 
-By using `WLR_DRM_DEVICES=/dev/dri/card1` (or `card0`) environment variable you can force Hyprland to
+By using `AQ_DRM_DEVICES=/dev/dri/card1` (or `card0`) environment variable you can force Hyprland to
 use only your dGPU, meaning your laptop's screen will be gone but your external
 one will work.
 

pages/Getting Started/Installation.md

@@ -211,15 +211,12 @@ copy hyprctl to `/usr/bin/`.
 
 copy hyprpm to `/usr/bin/`.
 
-copy the wlroots .so (`libwlroots.so.XX032`) to `/usr/lib/`.
-
 copy the desktop entry (`example/hyprland.desktop`) to
 `/usr/share/wayland-sessions/`
 
 the example config is in `example/hyprland.conf`.
 
-For updating later on, you can overwrite the binaries (hyprctl, hyprland and
-libwlroots), you don't need to update anything else.
+For updating later on, you can overwrite the binaries (hyprctl, hyprland, hyprpm ...). You don't need to update anything else.
 
 ### Manual (Manual Build)
 
@@ -251,7 +248,7 @@ zypper in gcc-c++ git meson cmake "pkgconfig(cairo)" "pkgconfig(egl)" "pkgconfig
 
 ```plain
 pkg install git pkgconf gmake gcc evdev-proto cmake wayland-protocols wayland libglvnd libxkbcommon libinput cairo pango pixman libxcb
-pkg install meson jq `pkg rquery %dn wlroots` hwdata libdisplay-info libliftoff
+pkg install meson jq hwdata libdisplay-info libliftoff
 export CC=gcc CXX=g++ LDFLAGS="-static-libstdc++ -static-libgcc"
 ```
 
@@ -261,11 +258,7 @@ export CC=gcc CXX=g++ LDFLAGS="-static-libstdc++ -static-libgcc"
 
 refer to the Ubuntu tab above
 
-Please note Hyprland builds `wlroots`. Make sure you have the dependencies of
-wlroots installed, you can make sure you have them by installing wlroots
-separately (Hyprland doesn't mind)
-
-Also note that Hyprland uses the C++23 standard, so both your compiler and your
+Please note that Hyprland uses the C++23 standard, so both your compiler and your
 C++ library has to support that (`gcc>=13.0.0` or `clang>=15`). On Clang-based
 systems libc++ may be used by default, so until libc++ supports C++23 you have
 to pass `-stdlib=libstdc++` or switch to GCC.
@@ -276,6 +269,7 @@ to pass `-stdlib=libstdc++` or switch to GCC.
 
 Additionally to those, you will also need a few hypr* dependencies which may or may not be
 packaged for your distro of choice:
+ - aquamarine
  - hyprlang
  - hyprcursor
  - hyprwayland-scanner (build-only)
@@ -367,7 +361,7 @@ Now, of course, install manually.
 sudo cp ./build/Hyprland /usr/bin && sudo cp ./example/hyprland.desktop /usr/share/wayland-sessions
 ```
 
-Lastly, copy hyprctl, hyprpm, and wlroots as mentioned
+Lastly, copy hyprctl, hyprpm, hyprctl, etc as mentioned
 [here](#manual-releases-linux-only)
 
 ## Running In a VM

pages/Nvidia/_index.md

@@ -92,7 +92,9 @@ cursor {
 {{< callout type=warning >}}
 
 Previously used `WLR_NO_HARDWARE_CURSORS` environment variable has been deprecated.
-Do not set it in your configs. Use `cursor:no_hardware_cursors` instead.
+Do not set it in your configs. Use `cursor:no_hardware_cursors` instead, and enable `cursor:allow_dumb_copy`.
+
+Please note this may cause small hitches whenever the cursor shape changes.
 
 {{< /callout >}}