treewide: run linter

pages/Configuring/Binds.md

@@ -200,7 +200,7 @@ bindrl = MOD, KEY, exec, amongus
 
 Flags:
 
-```
+```plain
 l -> locked, will also work when an input inhibitor (e.g. a lockscreen) is active.
 r -> release, will trigger on release of a key.
 e -> repeat, will repeat when held.

pages/Configuring/Dispatchers.md

@@ -138,7 +138,7 @@ You have nine choices:
 - Previous workspace: `previous`, or `previous_per_monitor`
 
 - First available empty workspace: `empty`, suffix with `m` to only search
-  on monitor. and/or `n` to make it the *next* available empty workspace. e.g.
+  on monitor. and/or `n` to make it the _next_ available empty workspace. e.g.
   `emptynm`
 
 - Special Workspace: `special` or `special:name` for named special workspaces.
@@ -227,4 +227,3 @@ address:0x13371337 nomaxsize 0
 address:0x13371337 opaque toggle
 address:0x13371337 immediate unset
 ```
-

pages/Configuring/Example-configurations.md

@@ -9,48 +9,48 @@ from a more tangible example.
 
 ### end_4
 
-![](https://github.com/end-4/dots-hyprland/assets/97237370/5e081770-0f1e-45c4-ad9c-3d19f488cd85)
+![end-4/dots-hyprland screenshot](https://github.com/end-4/dots-hyprland/assets/97237370/5e081770-0f1e-45c4-ad9c-3d19f488cd85)
 
 [https://github.com/end-4/dots-hyprland](https://github.com/end-4/dots-hyprland)
 
 ### Stephan Raabe (ML4W)
 
-![](https://i.ibb.co/6ydHNt9/screenshot-29-1.png)
+![mylinuxforwork/dotfiles screenshot](https://i.ibb.co/6ydHNt9/screenshot-29-1.png)
 
 [https://github.com/mylinuxforwork/dotfiles](https://github.com/mylinuxforwork/dotfiles)
 
 ### fufexan
 
-![](https://user-images.githubusercontent.com/36706276/192147190-cf9cf4df-94cb-4a3b-b9d8-137ed0c2538f.png)
+![fufexan/dotfiles screenshot](https://user-images.githubusercontent.com/36706276/192147190-cf9cf4df-94cb-4a3b-b9d8-137ed0c2538f.png)
 
 [https://github.com/fufexan/dotfiles](https://github.com/fufexan/dotfiles)
 
 ### linuxmobile
 
-![](https://i.ibb.co/kGrhpKd/68747470733a2f2f692e696d6775722e636f6d2f553173336a69372e706e67.png)
+![linuxmobile/hyprland-dots screenshot](https://i.ibb.co/kGrhpKd/68747470733a2f2f692e696d6775722e636f6d2f553173336a69372e706e67.png)
 
 [https://github.com/linuxmobile/hyprland-dots](https://github.com/linuxmobile/hyprland-dots)
 
 ### flick0
 
-![](https://raw.githubusercontent.com/flick0/dotfiles/aurora/assets/fetch.png)
+![flick0/dotfiles screenshot](https://raw.githubusercontent.com/flick0/dotfiles/aurora/assets/fetch.png)
 
 [https://github.com/flick0/dotfiles](https://github.com/flick0/dotfiles)
 
 ### iamverysimp1e
 
-![](https://github.com/iamverysimp1e/dots/raw/main/ScreenShots/HyprLand/Rice1.png)
+![iamverysimp1e/dots screenshot](https://github.com/iamverysimp1e/dots/raw/main/ScreenShots/HyprLand/Rice1.png)
 
 [https://github.com/iamverysimp1e/dots](https://github.com/iamverysimp1e/dots)
 
 ### notusknot
 
-![](https://github.com/notusknot/dotfiles-nix/raw/main/pics/screenshot.png)
+![notusknot/dotfiles-nix screenshot](https://github.com/notusknot/dotfiles-nix/raw/main/pics/screenshot.png)
 
 [https://github.com/notusknot/dotfiles-nix](https://github.com/notusknot/dotfiles-nix)
 
 ### coffebar
 
-![](https://github.com/coffebar/dotfiles/raw/6a5d595c594f108cd10219df08d338e98e1d2d7d/screenshot.png)
+![coffebar/dotfiles screenshot](https://github.com/coffebar/dotfiles/raw/6a5d595c594f108cd10219df08d338e98e1d2d7d/screenshot.png)
 
 [https://github.com/coffebar/dotfiles](https://github.com/coffebar/dotfiles)

pages/Configuring/Keywords.md

@@ -27,6 +27,7 @@ three_param_keyword = A, B,   # OK
 ## Executing
 
 You can execute a shell script on:
+
 - startup of the compositor
 - every time the config is reloaded.
 - shutdown of the compositor

pages/Configuring/Monitors.md

@@ -85,15 +85,17 @@ Leaving the name empty will define a fallback rule to use when no other rules
 match.
 
 There are a few special values for the resolutions:
+
 - `preferred` - use the display's preferred size and refresh rate.
 - `highres` - use the highest supported resolution.
 - `highrr` - use the highest supported refresh rate.
 
 Position also has a few special values:
+
 - `auto` - let Hyprland decide on a position. By default, it places each new monitor to the right of existing ones.
 - `auto-right/left/up/down` - place the monitor to the right/left, above or below other monitors.
 
-***Please Note:*** While specifying a monitor direction for your first monitor is allowed, this does nothing and it will
+_**Please Note:**_ While specifying a monitor direction for your first monitor is allowed, this does nothing and it will
 be positioned at (0,0). Also the direction is always from the center out, so you can specify `auto-up` then `auto-left`,
 but the left monitors will just be left of the origin and above the origin. You can also specify duplicate directions and
 monitors will continue to go in that direction.
@@ -231,7 +233,7 @@ monitor = eDP-1, 2880x1800@90, 0x0, 1, transform, 1
 
 Transform list:
 
-```
+```plain
 0 -> normal (no transforms)
 1 -> 90 degrees
 2 -> 180 degrees

pages/Configuring/Multi-GPU.md

@@ -19,7 +19,7 @@ For this case, the writer is taking the example of their laptop.
 Upon running `lspci | grep -E 'VGA|3D'`, One can list all the video devices
 available.
 
-```
+```plain
 01:00.0 VGA compatible controller: NVIDIA Corporation TU117M [GeForce GTX 1650 Mobile / Max-Q] (rev a1)
 06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c6)
 ```
@@ -29,7 +29,7 @@ Here it is clear that 2 GPUs are available, the dedicated NVIDIA GTX 1650 Mobile
 
 Now, run `ls -l /dev/dri/by-path`
 
-```
+```plain
  total 0
 lrwxrwxrwx 1 root root  8 Jul 14 15:45 pci-0000:01:00.0-card -> ../card0
 lrwxrwxrwx 1 root root 13 Jul 14 15:45 pci-0000:01:00.0-render -> ../renderD128
@@ -64,7 +64,7 @@ required.
 If instead you would like to use another GPU, or the wrong GPU is picked by default,
 set `AQ_DRM_DEVICES` to a `:`-separated list of card paths, e.g.
 
-```
+```plain
 env = AQ_DRM_DEVICES,/dev/dri/card0:/dev/dri/card1
 ```
 

pages/Configuring/Uncommon-tips-&-tricks.md

@@ -8,7 +8,7 @@ title: Uncommon tips & tricks
 The easiest way to accomplish this is to set this using XKB settings, for
 example:
 
-```
+```ini
 input {
     kb_layout = us,cz
     kb_variant = ,qwerty
@@ -69,7 +69,7 @@ submap = reset
 
 ## Remap Caps-Lock to Ctrl
 
-```
+```ini
 input {
     kb_options = ctrl:nocaps
 }
@@ -77,13 +77,14 @@ input {
 
 ## Swap Caps-Lock and Escape
 
-```
+```ini
 input {
     kb_options = caps:swapescape
 }
 ```
 
 ## Set F13-F24 as usual function keys
+
 By default, F13-F24 are mapped by xkb as various "XF86" keysyms. These cause binding
 issues in many programs. One example is OBS Studio, which does not detect the XF86
 keysyms as usable keybindings, making you unable to use them for binds. This option
@@ -94,15 +95,17 @@ This option was only added recently to `xkeyboard-config`. Please ensure you are
 2.43 or greater for this option to do anything.
 {{< /callout >}}
 
-```
+```ini
 input {
     kb_options = fkeys:basic_13-24
 }
 ```
 
 ## Minimize windows using special workspaces
+
 This approach uses special workspaces to mimic the "minimize window" function, by using a single keybind to toggle the minimized state.
 Note that one keybind can only handle one window.
+
 ```ini
 bind = $mod, S, togglespecialworkspace, magic
 bind = $mod, S, movetoworkspace, +0

pages/Configuring/Using-hyprctl.md

@@ -194,6 +194,7 @@ To disable:
 ```sh
 hyprctl seterror disable
 ```
+
 ### notify
 
 Sends a notification using the built-in Hyprland notification system.

pages/Configuring/Variables.md

@@ -347,7 +347,7 @@ _Subcategory `group:groupbar:`_
 | name | description | type | default |
 | --- | --- | --- | --- |
 | enabled | enables groupbars | bool | true |
-| font_family | font used to display groupbar titles, use `misc:font_family` if not specified | string | [[Empty]] |
+| font_family | font used to display groupbar titles, use `misc:font_family` if not specified | string | [\[Empty]] |
 | font_size | font size of groupbar title | int | 8 |
 | gradients | enables gradients | bool | true |
 | height | height of the groupbar | int | 14 |
@@ -369,7 +369,7 @@ _Subcategory `group:groupbar:`_
 | disable_splash_rendering | disables the Hyprland splash rendering. (requires a monitor reload to take effect) | bool | false |
 | col.splash | Changes the color of the splash text (requires a monitor reload to take effect). | color | 0xffffffff |
 | font_family | Set the global default font to render the text including debug fps/notification, config error messages and etc., selected from system fonts. | string | Sans |
-| splash_font_family | Changes the font used to render the splash text, selected from system fonts (requires a monitor reload to take effect). | string | [[Empty]] |
+| splash_font_family | Changes the font used to render the splash text, selected from system fonts (requires a monitor reload to take effect). | string | [\[Empty]] |
 | force_default_wallpaper | Enforce any of the 3 default wallpapers. Setting this to `0` or `1` disables the anime background. `-1` means "random". [-1/0/1/2] | int | -1 |
 | vfr | controls the VFR status of Hyprland. Heavily recommended to leave enabled to conserve resources. | bool | true |
 | vrr | controls the VRR (Adaptive Sync) of your monitors. 0 - off, 1 - on, 2 - fullscreen only [0/1/2] | int | 0 |
@@ -381,8 +381,8 @@ _Subcategory `group:groupbar:`_
 | animate_mouse_windowdragging | If true, will animate windows being dragged by mouse, note that this can cause weird behavior on some curves | bool | false |
 | disable_autoreload | If true, the config will not reload automatically on save, and instead needs to be reloaded with `hyprctl reload`. Might save on battery. | bool | false |
 | enable_swallow | Enable window swallowing | bool | false |
-| swallow_regex | The *class* regex to be used for windows that should be swallowed (usually, a terminal). To know more about the list of regex which can be used [use this cheatsheet](https://github.com/ziishaned/learn-regex/blob/master/README.md). | str | \[\[Empty\]\] |
+| swallow_regex | The _class_ regex to be used for windows that should be swallowed (usually, a terminal). To know more about the list of regex which can be used [use this cheatsheet](https://github.com/ziishaned/learn-regex/blob/master/README.md). | str | \[\[Empty\]\] |
-| swallow_exception_regex | The *title* regex to be used for windows that should *not* be swallowed by the windows specified in swallow_regex  (e.g. wev). The regex is matched against the parent (e.g. Kitty) window's title on the assumption that it changes to whatever process it's running. | str | \[\[Empty\]\] |
+| swallow_exception_regex | The _title_ regex to be used for windows that should _not_ be swallowed by the windows specified in swallow_regex  (e.g. wev). The regex is matched against the parent (e.g. Kitty) window's title on the assumption that it changes to whatever process it's running. | str | \[\[Empty\]\] |
 | focus_on_activate | Whether Hyprland should focus an app that requests to be focused (an `activate` request) | bool | false |
 | mouse_move_focuses_monitor | Whether mouse moving into a different monitor should focus it | bool | true |
 | render_ahead_of_time | [Warning: buggy] starts rendering _before_ your monitor displays a frame in order to lower latency | bool | false |

pages/Configuring/Window-Rules.md

@@ -118,7 +118,7 @@ It is not possible to `float` (or any other of the static rules) a window based
 | monitor \[id\] | sets the monitor on which a window should open. `id` can be either id or name (either e.g. `1` or e.g. `DP-1`) |
 | workspace \[w\] | sets the workspace on which a window should open (for workspace syntax, see [dispatchers->workspaces](../Dispatchers#workspaces)). You can also make \[w\] to `unset`, will unset all previous workspace rules applied to this window. You can also add `silent` after the workspace to make the window open silently. |
 | noinitialfocus | disables the initial focus to the window |
-| pin | pins the window  (i.e. show it on all workspaces) *note: floating only* |
+| pin | pins the window  (i.e. show it on all workspaces) _note: floating only_ |
 | unset | removes all previously set rules for the given parameters. Please note it has to match EXACTLY. |
 | nomaxsize | removes max size limitations. Especially useful with windows that report invalid max sizes (e.g. winecfg) |
 | stayfocused | forces focus on the window as long as it's visible |

pages/Configuring/Workspace-Rules.md

@@ -19,6 +19,7 @@ Selectors have props separated by a space. No spaces are allowed inside props
 themselves.
 
 Props:
+
 - `r[A-B]` - ID range from A to B inclusive
 - `s[bool]` - Whether the workspace is special or not
 - `n[bool]`, `n[s:string]`, `n[e:string]` - named actions. `n[bool]` ->

pages/Connect/_index.md

@@ -9,13 +9,11 @@ These are the links to official Hyprland-related spaces or profiles:
 
 Twitter: [twitter.com/hyprwm](https://twitter.com/hyprwm)
 
-
 ## Spaces
 
 Discord: [discord.gg/hQ9XvMUjjr](https://discord.gg/hQ9XvMUjjr)<br/>
 Matrix: `#hyprland:matrix.vaxry.net`
 
-
 ## Other
 
 hyprland.org git instance: [code.hyprland.org](https://code.hyprland.org/)<br/>

pages/Contributing and Debugging/_index.md

@@ -27,7 +27,7 @@ that you can copy to your .vscode/ folder in the repo root.
 With that, you can build in debug, go to the debugging tab and hit
 `(gdb) Launch`.
 
-*note:* You probably want to set `watchdog_timeout = 0` in the debug {} section
+_note:_ You probably want to set `watchdog_timeout = 0` in the debug {} section
 of your config. Otherwise Hyprland will notice its hanging when you hit a
 breakpoint and it will crash after you continue out of it.
 
@@ -78,7 +78,7 @@ If you want proper LSP support in an editor that doesn't automatically set it
 up, use clangd. You'll probably notice there will be a bunch of warnings
 because we haven't generated compile commands, to do this run:
 
-```
+```sh
 cmake -S . -B build/ -G Ninja -DCMAKE_EXPORT_COMPILE_COMMANDS=ON
 ```
 

pages/Crashes and Bugs/_index.md

@@ -152,7 +152,11 @@ we can render to) and put it on your screen (via the gpu) instead of a window.
 Freezes, glitches, and others, can be caused by issues with Hyprland's communication with DRM, the driver
 or kernel. In those cases, a DRM log is helpful.
 
-_Please note, these logs are EXTREMELY verbose. Please reproduce your bug(s) ASAP to avoid getting a 1GB log_
+{{< callout >}}
+
+Please note, these logs are EXTREMELY verbose. Please reproduce your bug(s) ASAP to avoid getting a 1GB log.
+
+{{< /callout >}}
 
 ```sh
 echo 0x19F | sudo tee /sys/module/drm/parameters/debug  # cnables verbose drm logging

pages/FAQ/_index.md

@@ -35,10 +35,10 @@ _[wiki page](../Crashes-and-Bugs)_
 For Nvidia graphics - This issue appears to be resolved when using Nvidia
 Drivers 525.60.11 or later, but it may persist with older drivers.
 
-For systems with limited hardware (Ex. iGPU, USB-C, USB Hubs) - Set `env = AQ_NO_MODIFIERS,1` in your config \
+For systems with limited hardware (Ex. iGPU, USB-C, USB Hubs) - Set `env = AQ_NO_MODIFIERS,1` in your config.
 To diagnose if you have the exact problem above you can get a [DRM log](https://wiki.hyprland.org/Crashes-and-Bugs/#debugging-drm-issues) and look for
 
-```
+```plain
 Requested display configuration exceeds system DDB limitations
 ```
 
@@ -78,7 +78,6 @@ utility, try our own screenshotting utility:
 
 **Option 2:** You can also use hyprshot, more info [here](https://github.com/Gustash/Hyprshot).
 
-
 **Option 3:** Install `flameshot`.
 
 Flameshot has many built-in features like allowing you to draw with a paintbrush,
@@ -90,7 +89,7 @@ The options above are smoother and more native to Wayland. If you still want to
 use Flameshot, here are some configuration recommendations by users who've found
 workarounds.
 
-```
+```ini
 # noanim isn't necessary but animations with these rules might look bad. use at your own discretion.
 windowrulev2 = noanim, class:^(flameshot)$
 windowrulev2 = float, class:^(flameshot)$
@@ -158,6 +157,7 @@ Be aware that they will not prevent tty-changing using Ctrl-Alt-F1...F7.
 ### How do I change me mouse cursor?
 
 See [hyprcursor](../Hypr-Ecosystem/hyprcursor)
+
 1. Set the GTK cursor using [nwg-look](https://github.com/nwg-piotr/nwg-look).
 2. Add `exec-once=hyprctl setcursor [THEME] [SIZE]` to your config and restart Hyprland.
 
@@ -414,7 +414,7 @@ monitor = Unknown-1,disabled
 
 If you are using a -git package, this is a common occurrence when ABI-breaking updates are done.
 
-***Do not*** symlink different .so versions, this will cause crashes!!!
+_**Do not**_ symlink different .so versions, this will cause crashes!!!
 
 Instead, find all hypr* packages with `-git` you have installed, remove them (possibly remove dependencies of them, too)
 and simply install them again.

pages/Getting Started/Installation.md

@@ -341,6 +341,7 @@ epmi hypridle
 epmi hyprpaper
 epmi hyprpicker
 ```
+
 {{% /details %}}
 
 {{% details title="Solus*" closed="true" %}}

pages/Getting Started/Master-Tutorial.md

@@ -19,14 +19,22 @@ repositories.
 
 ## Nvidia?
 
-_If not using an Nvidia card, skip this step_
+{{< callout type=info >}}
+
+If not using an Nvidia card, skip this step.
+
+{{< /callout >}}
 
 Please take a look at [The Nvidia page](../../Nvidia) before launching. It has
 information regarding the needed environment and tweaks.
 
 ## VM?
 
-_If not using a VM, skip this step_
+{{< callout type=info >}}
+
+If not using a VM, skip this step.
+
+{{< /callout >}}
 
 In a VM, make sure you have 3D acceleration enabled in your `virtio` config (or
 `virt-manager`) otherwise Hyprland _**will not work**_.

pages/Hypr Ecosystem/_index.md

@@ -14,6 +14,7 @@ These docs always target latest -git branch of respective apps.
 ## Wiki pages
 
 ### Apps/utilities for the user
+
 - **[hyprpaper](./hyprpaper)**
 - **[hyprpicker](./hyprpicker)**
 - **[hypridle](./hypridle)**
@@ -24,9 +25,9 @@ These docs always target latest -git branch of respective apps.
 - **[hyprpolkitagent](./hyprpolkitagent)**
 
 ### Libraries and other utilities
+
 - **[hyprcursor](./hyprcursor)**
 - **[hyprutils](./hyprutils)**
 - **[hyprlang](./hyprlang)**
 - **[hyprwayland-scanner](./hyprwayland-scanner)**
 - **[aquamarine](./aquamarine)**
- 

pages/Hypr Ecosystem/aquamarine.md

@@ -24,4 +24,3 @@ Configuration options are passed via environment variables starting with `AQ_` t
 ## Documentation
 
 Documentation will come soon.
-

pages/Hypr Ecosystem/hyprcursor.md

@@ -2,6 +2,7 @@
 weight: 101
 title: hyprcursor
 ---
+
 hyprcursor is a new cursor theme format that has many advantages
 over the widely used xcursor.
 
@@ -22,6 +23,7 @@ to potential permission issues.
 You can set your theme with envvars, or with `hyprctl setcursor`.
 
 Env:
+
 - `HYPRCURSOR_THEME` controls the theme.
 - `HYPRCURSOR_SIZE` controls the cursor size.
 

pages/Hypr Ecosystem/hyprlang.md

@@ -30,6 +30,7 @@ there only for legibility.
 Categories can be regular, and "special".
 
 Both are specified the same:
+
 ```ini
 category {
     variable = value
@@ -37,6 +38,7 @@ category {
 ```
 
 Special categories can have other properties, like for example containing a key:
+
 ```ini
 special {
     key = A
@@ -54,11 +56,13 @@ example uses those for per-device configs.
 ### Defining variables
 
 Variables can be defined like so:
+
 ```ini
 $VAR = myData
 ```
 
 Later on, you can use them like so:
+
 ```ini
 $SUFFIX = -san
 $NAME = Jeremy
@@ -91,11 +95,13 @@ someoption = blah
 ### Inline options
 
 If you want to specify an option inline, without opening and closing a category, the separator is `:`:
+
 ```ini
 category:variable = value
 ```
 
 If the category is special and requires a key, you can do:
+
 ```ini
 category[keyvalue]:variable = value
 ```
@@ -105,4 +111,3 @@ This is the syntax used by `hyprctl keyword`, for example.
 ## Developer documentation
 
 See the documentation at [hyprland.org/hyprlang](https://hyprland.org/hyprlang/).
-

pages/Hypr Ecosystem/hyprlock.md

@@ -14,6 +14,7 @@ is not required, but recommended. Without it, locking shows the current screen.
 ### General
 
 Variables in the `general` category:
+
 | variable | description | type | default |
 | -- | -- | -- | -- |
 | disable_loading_bar | disables the loading bar on the bottom of the screen while hyprlock is booting up. | bool | false |
@@ -39,6 +40,7 @@ If you are not on hyprland, or your  `XDG_CURRENT_DESKTOP` is not Hyprland, the
 ## Keyboard Shortcuts and Actions
 
 The following keys and key-combinations describe hyprlock's default behaviour:
+
 | input | description |
 | -- | -- |
 | ESC | Clear password buffer |
@@ -80,6 +82,7 @@ widget_name {
 ### Shadowable
 
 Some widgets are shadowable, meaning they can have a shadow. For those widgets, you get:
+
 | variable | description | type | default |
 | -- | -- | -- | -- |
 | shadow_passes | passes for shadow, 0 to disable | int | 0 |
@@ -212,15 +215,18 @@ input-field {
 When `outline_thickness` set to `0`, the color of the inner box will be changed instead of the outer.
 
 Behaviour of `swap_font_color` is as follows:
+
 - `outline_thickness` is `0`: if set, font color will be swapped with inner one on color change events (e.g. Caps-lock on or password check).
 - `outline_thickness` is not `0`: if set, font and inner colors will be swapped on password check and authentication failure.
 
 {{< /callout >}}
 
 Available variables for `placeholder_text`:
+
 - `$PROMPT` - prompt text provided by pam. Usually this will be "Password: ", but it depends on your pam configuration.
 
 Available variables for `fail_text`:
+
 - `$FAIL` - pam fail reason
 - `$ATTEMPTS` - number of failed authentication attempts
 
@@ -247,6 +253,7 @@ label {
 ```
 
 Available variables for `text`:
+
 - `$USER` - username (e.g. linux-user)
 - `$DESC` - user description (e.g. Linux User)
 - `$TIME` - current time in 24-hour format (e.g. `13:37`)
@@ -264,6 +271,7 @@ text = cmd[update:1000] echo "<span foreground='##ff2222'>$(date)</span>"
 ```
 
 Worth noting:
+
 - `update:` - time is in ms.
 - label can be forcefully updated by specifying `update:<time>:1` or `update:<time>:true` and sending `SIGUSR2` to hyprlock. `<time>` can be `0` in this case.
 - `$ATTEMPTS[<string>]` format can be used to show `<string>` when there are no failed attempts. You can use pango-markup here. `<string>` can be empty to hide.

pages/Hypr Ecosystem/hyprpaper.md

@@ -31,12 +31,12 @@ sudo dnf install hyprpaper
 
 {{% /details %}}
 
-
 {{% details title="Manual" closed="true" %}}
 
 ### Dependencies
 The development files of these packages need to be installed on the system for `hyprpaper` to build correctly.
 (Development packages are usually suffixed with `-dev` or `-devel` in most distros' repos).
+
 - wayland
 - wayland-protocols
 - pango
@@ -51,17 +51,20 @@ The development files of these packages need to be installed on the system for `
 - hyprwayland-scanner
 
 To install all of these in Fedora, run this command:
-```
+
+```sh
 sudo dnf install wayland-devel wayland-protocols-devel hyprlang-devel pango-devel cairo-devel file-devel libglvnd-devel libglvnd-core-devel libjpeg-turbo-devel libwebp-devel gcc-c++ hyprutils-devel hyprwayland-scanner
 ```
 
 On Arch:
-```
+
+```sh
 sudo pacman -S ninja gcc wayland-protocols libjpeg-turbo libwebp pango cairo pkgconf cmake libglvnd wayland hyprutils hyprwayland-scanner hyprlang
 ```
 
 On OpenSUSE:
-```
+
+```sh
 sudo zypper install ninja gcc-c++ wayland-protocols-devel Mesa-libGLESv3-devel file-devel hyprutils-devel hyprwayland-scanner
 ```
 
@@ -101,9 +104,9 @@ wallpaper = monitor, /home/me/amongus.png
 wallpaper = , /home/me/amongus.png
 ```
 
-Monitor names can be checked with `hyprctl monitors`
+Monitor names can be checked with `hyprctl monitors`.
 
-Also can be used with `desc:` followed by the monitor's description without the (PORT) at the end
+Also can be used with `desc:` followed by the monitor's description without the (PORT) at the end.
 
 You may add `contain:` or `tile:` before the file path in `wallpaper =` to set the mode to either contain or tile, respectively, instead of cover:
 

pages/Hypr Ecosystem/hyprwayland-scanner.md

@@ -7,4 +7,3 @@ hyprwayland-scanner, also called hw-s, is a utility to generate sources and head
 for wayland protocol specifications.
 
 It is similar to wayland-scanner, but instead of C, it generates neat and safe C++ implementations.
-

pages/Nix/Contributing and Debugging.md

@@ -52,15 +52,15 @@ in the `nix develop` shell.
 For CMake:
 
 ```bash
-$ cmakeConfigurePhase # to run the CMake configure phase
+cmakeConfigurePhase # to run the CMake configure phase
-$ ninjaBuildPhase     # to run the Ninja build phase (or buildPhase when ninja is not available)
+ninjaBuildPhase     # to run the Ninja build phase (or buildPhase when ninja is not available)
-$ ninjaInstallPhase   # to run the Ninja install phase (or installPhase when ninja is not available)
+ninjaInstallPhase   # to run the Ninja install phase (or installPhase when ninja is not available)
 ```
 
 For Meson:
 
 ```bash
-$ mesonConfigurePhase # to run the Meson configure phase
+mesonConfigurePhase # to run the Meson configure phase
-$ ninjaBuildPhase     # to run the Ninja build phase
+ninjaBuildPhase     # to run the Ninja build phase
-$ mesonInstallPhase   # to run the Meson install phase
+mesonInstallPhase   # to run the Meson install phase
 ```

pages/Nvidia/_index.md

@@ -39,7 +39,7 @@ One issue is with [suspend](https://github.com/NVIDIA/open-gpu-kernel-modules/is
 You can choose between the `nvidia` or the `nvidia-dkms` package. There are pros and cons
 for each, but it is generally recommended to use the `dkms` package,
 as you won't have to rebuild the initramfs [manually](https://wiki.archlinux.org/title/NVIDIA#mkinitcpio) every time the kernel and drivers update, for example.
-If you're using a kernel that isn't `linux` or `linux-lts`, the `dkms` package is *required*.
+If you're using a kernel that isn't `linux` or `linux-lts`, the `dkms` package is _required_.
 
 ## Installation
 
@@ -86,6 +86,7 @@ env = __GLX_VENDOR_LIBRARY_NAME,nvidia
 ```
 
 and set this variable:
+
 ```ini
 cursor {
     no_hardware_cursors = true

pages/Useful Utilities/Clipboard-Managers.md

@@ -34,6 +34,7 @@ image/text previews, multi-select, pinned items and more.
 [GitHub](https://github.com/savedra1/clipse)
 
 ## cb
+
 Start by adding the following line to your `~/.config/hypr/hyprland.conf`
 
 ```ini
@@ -166,4 +167,3 @@ GUI-like behavior.
 
 For more details on `clipse`, please refer to its GitHub repo linked at the top
 of the page.
-

pages/Useful Utilities/Hypr-Ecosystem.md

@@ -1,3 +1,7 @@
+---
+weight: 12
+title: Hypr Ecosystem
+---
 The hypr ecosystem is a collection of apps developed by HyprWM, that are
 designed for Hyprland and to integrate with it as nicely as possible.
 

pages/Useful Utilities/Other.md

@@ -34,6 +34,7 @@ swapping and scheduling screen shaders; also functions as an
 - [gammastep](https://gitlab.com/chinstrap/gammastep) by _Chinstrap_: Control temperature color automatically depending on the time of the day and location.
 
 ### Wireless settings
+
 - [iwgtk](https://github.com/J-Lentz/iwgtk) by _Jesse Lentz_: WiFi settings frontend for `iwd` in GTK
 - [blueberry](https://github.com/linuxmint/blueberry) by _Linux Mint_: Bluetooth settings frontend in GTK
 - [Overskride](https://github.com/kaii-lb/overskride) by _kaii-lb_: A simple yet powerful bluetooth client in GTK4