# Table of Contents
{{< toc >}}
# Basic
```ini
bind=MODS,key,dispatcher,params
```
for example,
```ini
bind=SUPER_SHIFT,Q,exec,firefox
```
will bind opening firefox to SUPER + SHIFT + Q
{{< hint type=tip >}}
For binding keys without a modkey, leave it empty:
```ini
bind=,Print,exec,grim
```
{{< /hint >}}
_For a complete mod list, see [Variables](../Variables/#variable-types)._
_The dispatcher list can be found in [Dispatchers](../Dispatchers)._
# Uncommon syms / binding with a keycode
See the
[xkbcommon-keysyms.h header](https://github.com/xkbcommon/libxkbcommon/blob/master/include/xkbcommon/xkbcommon-keysyms.h)
for all the keysyms. The name you should use is the one after `XKB_KEY_`,
written in all lowercase.
If you are unsure of what your key's name is, or what it shifts into, you can
use `xev` or `wev` to find that information.
If you want to bind by a keycode, you can just input it in the KEY position,
e.g.:
```ini
bind=SUPER,28,exec,amongus
```
Will bind SUPER + T. (T is keycode 28.) - You
can also use `xev` or `wev` to find keycodes.
# Misc
## Unbind
You can also unbind with `unbind`, e.g.:
```ini
unbind=SUPER,O
```
May be useful for dynamic keybindings with `hyprctl`.
```sh
hyprctl keyword unbind SUPER,O
```
## Mouse buttons
You can also bind mouse buttons, by prefacing the mouse keycode with `mouse:`,
for example:
```ini
bind=SUPER,mouse:272,exec,amongus
```
will bind it to SUPER + LMB.
## Only modkeys
For binding only modkeys, you need to use the TARGET modmask (with the
activating mod) and the `r` flag, e.g.:
```ini
bindr=SUPERALT,Alt_L,exec,amongus
```
## Mouse wheel
You can also bind the mouse wheel with `mouse_up` and `mouse_down`:
```ini
bind=SUPER,mouse_down,workspace,e-1
```
(control the reset time with `binds:scroll_event_delay`)
## Switches
Useful for binding e.g. the lid close/open event:
```ini
bindl=,switch:[switch name],exec,swaylock
```
check out your switches in `hyprctl devices`.
# Bind flags
`bind` supports flags in this format:
```ini
bind[flags]=...
```
e.g.:
```ini
bindrl=MOD,KEY,exec,amongus
```
Flags:
```ini
l -> locked, aka. works also when an an input inhibitor (e.g. a lockscreen) is active
r -> release, will trigger on release of a key
e -> repeat, will repeat when held.
m -> mouse, see below
```
Example Usage:
```ini
# Example volume button that allows press and hold
binde=, XF86AudioRaiseVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+
# Example volume button that will activate even while an input inhibitor is active
bindl=, XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
# Start wofi opens wofi on first press, closes it on second
bindr=SUPER, SUPER_L, exec, pkill wofi || wofi
# See Mouse Binds section for bindm usage
```
# Mouse Binds
Mouse binds are binds that heavily rely on a mouse, usually its movement.
They will have one less arg, and look for example like this:
```ini
bindm=ALT,mouse:272,movewindow
```
this will create a bind with ALT + LMB to move the window
with your mouse.
_Available mouse binds_:
| Name | Description |
| -----|------------ |
| movewindow | moves the active window |
| resizewindow | resizes the active window |
_Common mouse buttons' codes:_
```txt
LMB -> 272
RMB -> 273
```
_for more, you can of course use `wev` to check._
{{< hint type=tip >}}
Mouse binds, despite their name, behave like normal binds. You are free to use
whatever keys / mods you please. When held, the mouse function will be activated.
{{< /hint >}}
# Binding mods
You can bind a mod alone like this:
```ini
bindr=ALT,Alt_L,exec,amongus
```
# Global Keybinds
Yes, you heard this right, Hyprland does support global keybinds for ALL apps,
including OBS, Discord, Firefox, etc.
See the [`pass` dispatcher](./Dispatchers/#dispatchers) for keybinds.
Let's take OBS as an example: the "Start/Stop Recording" keybind is set to
SUPER + F10, and you want to make it work globally.
Simply add
```ini
bind = SUPER,F10,pass,^(com\.obsproject\.Studio)$
```
to your config and you're done.
`pass` will pass the PRESS and RELEASE events by itself, no need for a `bindr`.
This also means that push-to-talk will work flawlessly with one pass, e.g.:
```ini
bind=,mouse:276,pass,^(TeamSpeak 3)$
```
Will pass MOUSE5 to TeamSpeak3.
{{< hint type=important >}}
XWayland is a bit wonky. Make sure that what you're passing is a "global Xorg
keybind", otherwise passing from a different XWayland app may not work.
It works flawlessly with all native Wayland applications though.
_Side note_: **OBS** on Wayland really dislikes keybinds with modifiers. If
they don't work, try removing mods and binding them to e.g. F1.
Combining this with a submap should yield neat and usable results.
{{< /hint >}}
# Submaps
If you want keybind submaps, for example if you press ALT +
R, you can enter a "resize" mode, resize with arrow keys, and leave
with escape, do it like this:
```ini
# will switch to a submap called resize
bind=ALT,R,submap,resize
# will start a submap called "resize"
submap=resize
# sets repeatable binds for resizing the active window
binde=,right,resizeactive,10 0
binde=,left,resizeactive,-10 0
binde=,up,resizeactive,0 -10
binde=,down,resizeactive,0 10
# use reset to go back to the global submap
bind=,escape,submap,reset
# will reset the submap, meaning end the current one and return to the global one
submap=reset
# keybinds further down will be global again...
```
**IMPORTANT:** do not forget a keybind to reset the keymap while inside it! (In
this case, `escape`)
If you get stuck inside a keymap, you can use `hyprctl dispatch submap reset` to
go back. If you do not have a terminal open, tough luck buddy. You have been warned.
You can also set the same keybind to perform multiple actions, such as resize
and close the submap, like so:
```ini
bind=ALT,R,submap,resize
submap=resize
bind=,right,resizeactive,10 0
bind=,right,submap,reset
# ...
submap=reset
```
This works because the binds are executed in the order they appear, and
assigning multiple actions per bind is possible.