* Nvidia hardware cursors patch
new file: patches/nvidia-hardware-cursors.patch
Sourced from upstream merge request
https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4596
* Repackaged the patch to be more concise and added a short description.
modified: patches/nvidia-hardware-cursors.patch
---------
Co-authored-by: Agent_00Ming <agent00ming9366@gmail.com>
* Add patching script with error checking+reporting
new file: patches/apply.sh
* Run patching script with run_command() at setup
and print the output with message() at the end
modified: meson.build
* Report on patch application failure and exit script with code 1
modified: patches/apply.sh
---------
Co-authored-by: Agent_00Ming <agent00ming9366@gmail.com>
Pre-multipled sRGB values need to be un-multiplied before conversion
to linear and then re-multiplied after. Compare shaders/texture.frag.
This fixes an issue in labwc where titlebar corners (rendered as
ARGB textures) did not match the rest of the titlebar (rendered as
a solid wlr_scene_rect).
Note: 0.17 has other instances in render/vulkan/renderer.c that need
the same fix.
Our multi-gpu path currently needs to blit a buffer in order to have a
primaryfb to add to the commit. This is expensive, and we skip it
entirely during test commits. This in turn also means that we skip tests
commits entirely for such outputs, outside our own basic tests.
Backend-wide commits missed this check, and tried to perform test
commits for multi-gpu outputs despite no primaryfb having been attached,
making them always fail. Add the same exception as we have in the
per-connector commit-test.
As of currently, when an xcursor theme depends on itself or another theme
that will eventually depend on it, `xcursor_load_theme` will recurse
infinitely while processing the inherits.
This change introduces a stack-allocated linked list of visited nodes
by name, and skips any already visited nodes in the inherit list.
Side effects:
* Since the linked list is stack-allocated, there is a potential for an
overflow if there is a very long list of dependencies. If this turns out
to be a legitimate concern, the linked list is trivial to convert to
being heap-allocated.
* There is an existing linked list (technically doubly linked list)
implementation in the wayland codebase. As of currently, the xcursor
codebase does not refer to it. Consequently, this change writes a
minimal single linked list implementation to utilize directly.
This changeset is based on the merge request in wayland/wayland!376.
The xcursor code is mostly shared between the two.
This changeset diverges the files slightly due to stylistic differences
between the repositories, but the logic is identical.
Signed-off-by: Chloé Vulquin <toast@bunkerlabs.net>
When a wlr_gamma_control client calls set_gamma, we allocate a LUT based
on the value returned from wlr_output_get_gamma_size at the time of the
call.
If the output is off and has no CRTC, such as if gamma changes in the
background while a display is disabled for idle reasons,
wlr_output_get_gamma_size returns 0. This leads to a zero-sized table,
which the drm backend interprets as a request to reset gamma tables to
their default.
Store the gamma size when the gamma control was created. Even if the
size changes, this is the size the client was sent and uses to create
the LUTs it sends.
Per comments in util/box.h, the width and height of a wlr_box are
exclusive; that is, for a 100x100 box at (0,0), the point (99,99) is
inside it while the point (100,100) is outside it.
Thus mathematically, there exists no single closest point to the
bottom-right corner of the box while remaining inside it. You can
construct an infinite series approaching the limit, such as {(99,99),
(99.9,99.9), (99.99,99.99)...}, but since the intervals are half-open,
there is no "last" point.
wlr_box_closest_point() must therefore define an arbitrary "closest"
point. For points below and to the right of the box, the current
implementation returns (box.x + width - 1, box.y + height - 1). Let's
continue to do this.
However, the current implementation is non-linear: with the example
100x100 box, it will return an input point of (99.9,99.9) unchanged, but
for an input point (100.1,100.1) the returned point will jump back to
(99.0,99.0).
In practice, this non-linearity results in strange behaviors when
driving the mouse cursor to a screen corner. On a 1920x1080 display for
example, driving the cursor quickly to the bottom-left corner results in
a position of exactly (0,1079). Continuing to slowly nudge the cursor
downward results in the position jumping between (0,1079) and other,
fractional coordinates such as (0,1079.88).
The fractional coordinates expose some client/toolkit-side bugs (which,
to be clear, should be fixed on the client side), but IMHO the wlroots
behavior is also inconsistent and wrong -- when I drive the mouse cursor
into the corner of the screen, it should come to a stop at a fixed
position, not jitter around.
The surface argument is only used to obtain a wlr_seat_client and
semantically makes no sense. The wl_touch.cancel event applies to all
touch points and all surfaces of a client.
I decided to make the functions accept a wlr_seat_client rather than a
wl_client as it is directly available in the wlr_touch_point struct and
simplifies the implementation.
Previously, cases when a viewport source box was updated without attaching
a buffer weren't checked for correctness properly because the state's buffer
would be NULL. Use wlr_surface_state_has_buffer() instead.
This is worth doing despite wl_client_get_destroy_listener() incorrectly
accepting a mutable wl_client pointer since this lookup_client()
function will primarily be used with a wl_display_global_filter_func_t
which only provides a const wl_client pointer.
Work around this libwayland API wart in wlroots so compositors don't
have to.
I wish to use a allowlist of globals for my security context
implementation rather than a blocklist, which means I need access to
the wp_single_pixel_buffer_manager_v1 global in order to allowlist it.
I think using a allowlist will make it harder for me to accidentally
expose globals to a security context that were meant to be restricted.
I wish to use a allowlist of globals for my security context
implementation rather than a blocklist, which means I need access to
the ext_idle_notifier_v1 global in order to allowlist it.
I think using a allowlist will make it harder for me to accidentally
expose globals to a security context that were meant to be restricted.
I wish to use a allowlist of globals for my security context
implementation rather than a blocklist, which means I need access to
the wl_shm global in order to allowlist it.
I think using a allowlist will make it harder for me to accidentally
expose globals to a security context that were meant to be restricted.
This new helper assists compositors in allocating buffers for
modesets. It degrades to different allocation parameters as
needed, and should help with screens not turning on when multiple
outputs are connected on some hardware (e.g. Intel).
For simplicity, the old logic to try allocating with explicit
modifiers first and then fallback to implicit modifiers later is
left as-is. We'll probably want to have more complicated logic
instead in the future: try the fallback on one output at a time,
and try dropping modifiers one by one instead of using implicit
modifiers (at the cost of some combinatorial explosion).
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/1873
Co-authored-by: Kenny Levinsen <kl@kl.wtf>
When a compositors submits a wlr_output_state with
WLR_OUTPUT_STATE_ADAPTIVE_SYNC_ENABLED set and
adaptive_sync_enabled = false on an output which doesn't support
adaptive sync, we'd fail the commit. Fix this.
This bug was previously hidden because wlr_output_commit() drops
no-op changes from wlr_output_state.committed.
After disabling a connector, we need to cleanup the connector to
teardown the surfaces and unlock the FBs.
Move this logic into drm_connector_apply_commit() so that it's
applied when drm_commit() is called from somewhere else than
drm_connector_commit_state().
There is some duplicated logic between these two functions.
The commit codepath was calling the test function before doing the
real commit, so this also saves an unnecessary test-only commit
when performing a real commit.
This centralizes logic common for both the atomic and libliftoff
backends. Additionally, a struct will make it easier to implement
multi-connector commits (since it can be stored in an array).
Ludwig Beuttel
flk
Mihai Fufezan
Agent00Ming
thejch
Vaxry
Vaxry
John Lindgren
Simon Ser
Biswapriyo Nath
Kenny Levinsen
Chloé Vulquin
Isaac Freund
Kirill Primak
Ian Forbes
Alexander Orzechowski