Commit Graph

1066 Commits

Author SHA1 Message Date
Simon Ser 3721dbfddb
backend/wayland: remove unnecessary flags from event source
wl_event_loop_add_fd only accepts READABLE and WRITABLE. ERROR and
HANGUP are always implicitly enabled.
2021-01-05 19:54:20 +01:00
Kenny Levinsen d3047011d0 backend/wayland: Avoid uninitialized read
keyboard_handle_leave would always process 1 keycode more than was
pending, which meant reading uninitialized memory from the "pressed"
array.

Found by valgrind.
2021-01-05 12:26:00 +01:00
Simon Ser e8d56ca415 backend/session: allow wlr_session_find_gpus to return an error
Sometimes wlr_session_find_gpus will encounter an error. This is
different from finding zero GPUs.

On error, wlr_session_find_gpus already returns -1. However, this is
casted to size_t, so callers uncorrectly assume this is a success.

Instead, make wlr_session_find_gpus return a ssize_t and allow callers
to handle the error accordingly.
2021-01-04 19:46:44 +01:00
Simon Ser 7febdc7334 backend/wayland: re-use cursor wl_buffers
We were importing cursor buffers as wl_buffers over and over again.
Instead, only import these once.
2021-01-04 13:48:28 +01:00
Simon Ser adfb7cd35a backend/drm: stash pending page-flip CRTC
wlr_drm_connector.crtc may be updated by the DRM backend while a
page-flip is pending. In this case, the page-flip handler won't be able
to find the right wlr_drm_connector from the CRTC ID.

Save the CRTC when performing a page-flip to ensure we always find the
right connector when we get the event.
2021-01-03 19:35:02 +01:00
Simon Ser 576ff57db0 backend/drm: ignore hotplug events while inactive
When the session is inactive, we can't change the KMS state. Ignore
hotplug events so that compositors don't try to perform a modeset when
a connector is plugged in. We already re-scan connectors when the
session becomes active.

To test, run a wlroots compositor on VT 1, switch to VT 2, unplug a
connector, re-plug it, switch back to VT 1. Without this patch the
screen is black on VT 1.

References: https://github.com/swaywm/wlroots/issues/2370
2021-01-03 19:34:54 +01:00
Ilia Bozhinov eb30cde777 noop: listen to display destroy and destroy the backend 2020-12-31 20:34:36 +01:00
Simon Ser 4ffd537d2d
backend/x11: print version on extension error 2020-12-31 20:17:31 +01:00
Simon Ser 1491ec42da backend/x11: always open render node
If we get an authenticated primary node from the X11 server, don't use
it because we can't authenticate our Wayland clients with it. Instead,
open a render node.

Closes: https://github.com/swaywm/wlroots/issues/2576
2020-12-30 19:37:19 +01:00
Simon Ser 4b03bdc3ab Remove wlr_create_renderer_func_t
This callback allowed compositors to customize the EGL config used by
the renderer. However with renderer v6 EGL configs aren't used anymore.
Instead, buffers are allocated via GBM and GL FBOs are rendered to. So
customizing the EGL config is a no-op.
2020-12-30 17:09:40 +01:00
Simon Ser bec1e6b149 backend/drm: remove special linear case for cursor plane
We now properly mark the cursor plane's formats as linear-only, and we
now have a version of wlr_drm_format_intersect that handles the case of
linear-only formats and implicit modifiers.

We can remove the special drm_plane_init_surface flag we had for cursor
planes. This also allows us to use a non-linear layout for cursor planes
on drivers that support it.

Tested on amdgpu GFX9.
2020-12-30 11:17:43 +01:00
Simon Ser 92a0fc0435 backend/drm: extract linear format creation into function
Simplifies error handling.
2020-12-30 11:17:43 +01:00
Simon Ser 7ea0e9f277 backend/drm: force LINEAR for cursor plane formats
If the kernel driver doesn't support modifiers, it still expects cursor
FBs to have a LINEAR layout. See [1] for expectations for framebuffers
attached to the cursor plane.

[1]: https://patchwork.freedesktop.org/patch/408512/
2020-12-30 11:17:43 +01:00
Simon Ser caeed70f28 backend/x11: create per-window present event contexts
The Present protocol states:

> An event context is associated with a specific window; using an existing
> event context with a different window generates a Match error.

Instead of a global event context, use a per-window event context to fix
this error:

    [backend/x11/backend.c:608] X11 error: op Present (SelectInput), code Match (no extension), sequence 63, value 4194307

Closes: https://github.com/swaywm/wlroots/issues/2577
2020-12-28 16:57:56 +01:00
Ariadne Conill 23b6f3e3f5 drm: add fallback drmModeAddFB for drivers which do not support drmModeAddFB2
This makes wlroots able to run on some big-endian machines like G4 and
G5 systems with ATI Radeon 7500 AGP graphics.
2020-12-28 14:15:04 +01:00
Simon Ser c012d770f7 backend/x11: implement a real rendering loop
Instead of using a timer, rely on X11 Present events and send a new
frame event when the parent compositor displays a new frame on screen.

The previous attempt at doing this [1] hit issues with EGLSurface, but
we don't use that anymore.

[1]: https://github.com/swaywm/wlroots/pull/1894
2020-12-27 10:10:07 +01:00
Simon Ser c5f239f411
backend/drm: make listener names more idiomatic
Use the "<object>_<event>" notation for listeners, use
"handle_<listener>" for handlers.
2020-12-25 14:45:00 +01:00
Simon Ser b9460ab724
Stop using wlr_texture_get_size
Just use wlr_texture.{width,height} directly.
2020-12-25 12:21:29 +01:00
Simon Ser 17dd4c9e9a
backend/drm: use connector log helpers in atomic backend 2020-12-24 17:55:45 +01:00
Simon Ser a7a230ebef
backend/drm: make drmModePlane arg in add_plane const
Make it clearer it'll be free'd after add_plane returns.
2020-12-24 12:34:13 +01:00
Simon Ser c011a0e2ed
backend/drm: add special case for cursor in add_plane
The code calling add_plane now makes sure not to add a cursor plane to a
CRTC which already has one.
2020-12-24 12:31:20 +01:00
Simon Ser 5548406667
backend/drm: log whether ADDFB2 modifiers are supported 2020-12-24 12:29:30 +01:00
Simon Ser 64a2ca4dba
backend/drm: don't retry page-flip when modifiers are unsupported
Parse WLR_DRM_NO_MODIFIERS at startup. Don't parse IN_FORMATS when
WLR_DRM_NO_MODIFIERS is set, so that the legacy behaviour is better
reproduced.

When modifiers aren't supported, try the initial page-flip once only.
2020-12-23 19:49:27 +01:00
Simon Ser 54ec17ff64
backend/drm: use plural form for possible_crtcs
Make it clearer that this is a bitmask of CRTC indices.
2020-12-23 12:14:36 +01:00
Simon Ser 2de400a541
backend/drm: assert connector state after wlr_output_destroy 2020-12-22 19:53:33 +01:00
Simon Ser 85cf4b235d
backend/drm: destroy DRM connectors that disappear
This was lost during the refactoring. We were previously calling
wlr_output_destroy, which destroyed the connector as well.

Fixes: 248c7787c7 ("backend/drm: refactor wlr_output destruction")
2020-12-22 19:38:29 +01:00
Simon Ser ad4dae0844 backend/drm: error on size mismatch in drm_surface_blit 2020-12-22 15:53:10 +01:00
Simon Ser d3bcd63a40 backend/drm: remove drm_fb_acquire
Instead, import the buffer into GBM and KMS in drm_fb_import. Also move
the multi-GPU copy there if necessary.
2020-12-22 15:53:10 +01:00
Simon Ser 5ee8b12dc3 backend/drm: make drm_fb_acquire return a FB ID 2020-12-22 15:53:10 +01:00
Simon Ser d09abe86c1 backend/drm: drop export_drm_bo
Not used anymore.
2020-12-22 15:53:10 +01:00
Simon Ser dabd2e7207 backend/drm: grab DMA-BUF from wlr_buffer instead of gbm_bo
Get the DMA-BUF directly out of the wlr_buffer instead of relying on the
gbm_bo. This eliminates a roundtrip through GBM.
2020-12-22 15:53:10 +01:00
Simon Ser 83925f04c3 backend/drm: don't save texture in gbm_bo user data
The GBM BO is destroyed when released anyways.
2020-12-22 15:53:10 +01:00
Simon Ser 55b02f753f backend/x11: destroy buffers when destroying output 2020-12-21 16:31:07 +01:00
Simon Ser d6dbdd97e9 backend/x11: re-use pixmaps
Instead of re-importing a buffer each time we submit a frame, re-use the
pixmaps if possible.
2020-12-21 16:31:07 +01:00
Simon Ser defcd9b025 backend/wayland: re-use wl_buffers
Instead of re-importing a buffer each time we submit a new frame, re-use
the wl_buffer objects if possible.
2020-12-21 16:30:47 +01:00
Simon Ser de896caceb backend/wayland: remove EGL config
We don't use EGLSurface anymore, so we don't need to choose an EGL
config anymore.
2020-12-19 21:11:01 +01:00
Ronan Pigott 917ecca58e backend/drm: avoid gcc stringop-truncation warning 2020-12-18 22:19:16 +01:00
Simon Ser 352fdd1bb0
backend/drm: remove unused wlr_drm_plane.drm_format 2020-12-18 11:44:50 +01:00
Simon Ser 248c7787c7 backend/drm: refactor wlr_output destruction
Instead of hand-rolling our own manual wlr_output cleanup function, rely
on wlr_output_destroy to remove an output from the compositor's state.
2020-12-18 10:48:44 +01:00
Simon Ser 019ffe8a5b backend/drm: introduce wlr_drm_connector.name
The DRM backend is a little special when it comes to wlr_outputs: the
wlr_drm_connectors are long-lived and are created even when no screen is
connected.

A wlr_drm_connector only advertises a wlr_output to the compositor when
a screen is connected. As such, most of wlr_output's state is invalid
when the connector is disconnected.

We want to stop using wlr_output state on disconnected connectors.
Introduce wlr_drm_connector.name which is always valid regardless of the
connector status to avoid reading wlr_output.name when disconnected.
2020-12-18 10:48:44 +01:00
Simon Ser c89b131f29 backend/drm: introduce wlr_drm_conn_log
Simplify and unify connector-specific logging with a new
wlr_drm_conn_log macro. This makes it easier to understand which
connector a failure is about, without having to explicitly integrate the
connector name in each log message.
2020-12-18 10:48:44 +01:00
Simon Ser 0aefa18690 backend/x11: send more precise output present events
Instead of sending dummy output present events, use the X11 Present
extension to send more precise events.
2020-12-18 10:37:08 +01:00
Simon Ser 94fda895ac backend/x11: use DRI3Open to get DRM FD
Instead of relying on EGL to retrieve the DRM FD, query it from the
DRI3 extension.

Use the EGL GBM platform, and drop the EGL config.
2020-12-18 10:12:55 +01:00
Simon Ser 1e2c7fce86 backend/drm: use wlr_drm_format_{create,add}
Instead of manually allocating and initializing the structs, use the new
wlr_drm_format helpers.
2020-12-18 09:41:12 +01:00
Simon Ser 253f447329
backend/drm: print DRM device name when scanning connectors 2020-12-17 20:50:19 +01:00
Simon Ser 9cd3f03f65
backend/drm: add wlr_drm_backend.name
Save the DRM device name in a wlr_drm_backend field, so that we can
easily use it for logging purposes.
2020-12-17 20:48:47 +01:00
Simon Ser 60001a75a2
backend/drm: remove nouveau workaround
The workaround is broken because drm_fb_acquire doesn't leave the EGL
context current anymore. We'll need to re-introduce it.

References: https://github.com/swaywm/wlroots/issues/2525
2020-12-17 20:38:02 +01:00
Simon Ser 0dcdb5e7a1 backend/x11: fix DRI3 formats not used
We queried DRI3 formats, but we weren't using them. Because of a typo,
only render formats were used.

Fixes: c59aacf944 ("backend/x11: query modifiers supported by X11 server")
Closes: https://github.com/swaywm/wlroots/issues/2552
2020-12-17 17:02:09 +01:00
Simon Ser 0aa2ba0c03 backend/headless: select the rendering device ourselves
Backends will eventually stop creating their renderer. To prepare for
this, stop using EGL_PLATFORM_SURFACELESS_MESA in the headless renderer.
Pick a render node using libdrm.

The new allocator/renderer creation logic looks very much like what will
end up in common code.
2020-12-16 12:12:36 +01:00
Simon Ser da2a216934
backend/drm: add wlr_drm_connector.backend
This allows the DRM code to have direct access to the wlr_drm_backend
without having to go through an upcast via get_drm_backend_from_backend.
2020-12-15 22:56:14 +01:00