Commit Graph

281 Commits

Author SHA1 Message Date
Simon Ser 2ca3bdc35e backend/drm: simplify atomic commit logic
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.

This is also groundwork for supporting wlr_output_test properly.
2020-05-10 09:21:04 +02:00
Simon Ser 06d5aa5780 backend/drm: GAMMA_LUT_SIZE isn't atomic
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.

It's no guaranteed to exist though, so we still need to keep the
fallback.
2020-05-10 09:20:46 +02:00
Simon Ser da63d11d34 backend/drm: remove crtc_set_cursor from interface 2020-05-09 16:42:25 +02:00
Simon Ser f8e02db4bc backend/drm: remove conn_enable from interface
Use crtc_commit instead.
2020-05-09 16:42:25 +02:00
Simon Ser c608fc89d8 backend/drm: rename crtc_pageflip to crtc_commit
Also add a flags argument.

The commit function will also be used for disabling the CRTC.
2020-05-09 16:42:25 +02:00
Simon Ser 70883fd10b backend/drm: apply gamma LUT on page-flip 2020-05-09 16:42:25 +02:00
Simon Ser 69b2279092 backend/drm: remove mode argument to crtc_pageflip
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending
output changes. More fields will be added in the future (e.g. active,
gamma).
2020-05-09 16:42:25 +02:00
Simon Ser 7a149fe5ba backend/drm: remove unused fields 2020-05-09 16:42:25 +02:00
Simon Ser c9d6b18eef backend/drm: remove wlr_drm_interface.crtc_move_cursor
Instead, make the legacy backend call drmModeMoveCursor on page-flip.
2020-05-09 16:42:25 +02:00
Simon Ser 46c83cbf3d backend/headless: handle renderer destroy
When the headless backend uses an already-existing renderer, it doesn't
have ownership over the renderer. When the renderer is destroyed, the
headless backend needs to destroy itself.
2020-05-02 19:36:03 +02:00
Scott Anderson 52281cb8ba backend/drm: move atomic cursor code into pageflip code
It makes sense to construct as much atomic state as possible in the same
place, so it doesn't get lost if we "reset" it.
2020-04-28 09:54:52 +02:00
Scott Anderson 8da9d9679e backend/drm: introduce wlr_drm_fb
This is a type which manages gbm_surfaces and imported dmabufs in the
same place, and makes the lifetime management between the two shared. It
should lead to easier to understand code, and fewer special cases.

This also contains a fair bit of refactoring to start using this new
type.

Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-28 09:54:52 +02:00
Simon Ser 6129a6f93e backend/headless: add wlr_headless_backend_create_with_renderer
This allows one to create a headless backend with an existing renderer.
2020-04-22 22:40:54 +02:00
Simon Ser 40513f1a0e backend/headless: use FBOs instead of pbuffers 2020-04-22 22:40:54 +02:00
Simon Ser 6977f3a843 output: check buffer in wlr_output_test
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.

This brings the wlr_output API more in line with the KMS API.

This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
2020-04-08 16:31:21 +02:00
Simon Ser 52c67284e2 backend/drm: add support for adaptive_sync_enabled
The vrr_capable and VRR_ENABLED properties are used.
2020-03-06 21:32:58 +01:00
Simon Ser 9be1af3afb backend/x11: add support for adaptive_sync_enabled
This sets the _VARIABLE_REFRESH window property [1].

[1]: 0616b7ac90/src/vulkan/wsi/wsi_common_x11.c (L1374)
2020-03-06 21:32:58 +01:00
Drew DeVault ebdbe177d6 Drop RDP backend
Users interested in remote access to wlroots compositors should use
wayvnc:

https://github.com/any1/wayvnc
2020-01-10 19:38:39 +01:00
Simon Ser e6fd880686 backend/wayland: listen to wl_buffer.release events
Previously, we just assumed submitting a new frame would make the
compositor release the current one. This isn't always the case, for
instance Sway retains old buffers when a transaction is pending. This
resulted in synchronization issues with clients writing in
front-buffers.

Fix this by un-referencing a wlr_buffer when the parent compositor sends
wl_buffer.release.

Tested by running a fullscreen mpv instance in Sway with the Wayland
backend.
2020-01-09 07:41:50 -07:00
Simon Ser 8681e4ab8a backend/drm, backend/libinput: listen to session destroy
This fixes a heap-use-after-free when the session is destroyed before
the backend during wl_display_destroy:

    ==1085==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000000180 at pc 0x7f88e3590c2d bp 0x7ffdc4e33f90 sp 0x7ffdc4e33f80
    READ of size 8 at 0x614000000180 thread T0
        #0 0x7f88e3590c2c in find_device ../subprojects/wlroots/backend/session/session.c:192
        #1 0x7f88e3590e85 in wlr_session_close_file ../subprojects/wlroots/backend/session/session.c:204
        #2 0x7f88e357b80c in libinput_close_restricted ../subprojects/wlroots/backend/libinput/backend.c:24
        #3 0x7f88e21af274  (/lib64/libinput.so.10+0x28274)
        #4 0x7f88e21aff1d  (/lib64/libinput.so.10+0x28f1d)
        #5 0x7f88e219ddac  (/lib64/libinput.so.10+0x16dac)
        #6 0x7f88e21b415d in libinput_unref (/lib64/libinput.so.10+0x2d15d)
        #7 0x7f88e357c9d6 in backend_destroy ../subprojects/wlroots/backend/libinput/backend.c:130
        #8 0x7f88e3545a09 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:50
        #9 0x7f88e358981a in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:54
        #10 0x7f88e358a059 in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:107
        #11 0x7f88e314acde  (/lib64/libwayland-server.so.0+0x8cde)
        #12 0x7f88e314b466 in wl_display_destroy (/lib64/libwayland-server.so.0+0x9466)
        #13 0x559fefb52385 in main ../main.c:67
        #14 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
        #15 0x559fefb4297d in _start (/home/simon/src/glider/build/glider+0x2297d)

    0x614000000180 is located 320 bytes inside of 416-byte region [0x614000000040,0x6140000001e0)
    freed by thread T0 here:
        #0 0x7f88e3d0a6b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
        #1 0x7f88e35b51fb in logind_session_destroy ../subprojects/wlroots/backend/session/logind.c:270
        #2 0x7f88e35905a4 in wlr_session_destroy ../subprojects/wlroots/backend/session/session.c:156
        #3 0x7f88e358f440 in handle_display_destroy ../subprojects/wlroots/backend/session/session.c:65
        #4 0x7f88e314acde  (/lib64/libwayland-server.so.0+0x8cde)

    previously allocated by thread T0 here:
        #0 0x7f88e3d0acd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
        #1 0x7f88e35b911c in logind_session_create ../subprojects/wlroots/backend/session/logind.c:746
        #2 0x7f88e358f6b4 in wlr_session_create ../subprojects/wlroots/backend/session/session.c:91
        #3 0x559fefb51ea6 in main ../main.c:20
        #4 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
2019-12-01 10:26:12 -05:00
Simon Ser e959b882d5 backend/wayland: add support for presentation-time 2019-11-21 11:32:30 -05:00
Simon Ser 16e5e9541b Add -Wmissing-prototypes
This requires functions without a prototype definition to be static.
This allows to detect dead code, export less symbols and put shared
functions in headers.
2019-11-20 02:05:03 +00:00
Scott Anderson 685a5a11a9 backend/x11: Revert usage of present extension
This reverts commit 3317134adf.
This reverts commit a3c3b928a3.

There are some serious issues when running this on a real X server, as
opposed to running this on Xwayland, where this was tested.

More investigation needs to be done into why these issues happen and if
our usage of the present extension is correct.
2019-11-19 11:06:38 +01:00
Simon Ser 1e568d84df backend/wayland: add support for relative-pointer-unstable-v1
We just send relative motion events alongside absolute motion events.
Compositors can figure out how absolute and relative events are related
(e.g. whether they have been triggered by the same logical event) with
the frame event.
2019-11-13 10:15:19 -05:00
Scott Anderson a3c3b928a3 backend/x11: Give X11 a real rendering loop
Makes use of the present extension to get notified of vsync, and not
require any stupid timer hacks. Also make use of the present version of
ConfigureNotify, because why not?
2019-11-02 12:43:33 +01:00
Simon Ser 0e57effd38 backend/drm: add support for custom modes
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-27 10:46:47 -04:00
Simon Ser e97c2c3639 backend/drm: retry without modifiers for the primary plane
On some Intel cards using modifiers can fill the FIFO and prevent
hotplugged outputs from being properly enabled.

Add a fallback without modifiers.

Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
References: https://github.com/swaywm/wlroots/issues/1840
Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-23 09:36:50 +00:00
Simon Ser fd25e2ca11 backend/drm: track gbm_bo during direct scan-out
We need to destroy the gbm_bo we imported and drmModeRmFb.

Closes: https://github.com/swaywm/sway/issues/4662
2019-10-22 21:50:31 +00:00
Simon Ser 5bddb5a909 backend/wayland: add support for direct scan-out
Closes: https://github.com/swaywm/wlroots/issues/1830
2019-10-16 09:40:26 -04:00
Simon Ser 2bdd1d0896 backend/drm: use modifiers for our GBM buffers 2019-10-11 08:11:48 -04:00
Markus Ongyerth ebeef0fbe8 Clean up wayland backend tablet support
Mostly address feedback from emersion on PR #1694
Remove const qualifier from char *name, to allow free() call
2019-09-26 19:41:19 +03:00
Markus Ongyerth 2285e36b0c Add zwp-tablet-unstable-v2 client support
This allows wlroots based compositors to properly use graphic tablets
with the wayland backend.
This should be a decent quality of life improvement when working on
tablet related features.
2019-09-26 19:41:19 +03:00
Rouven Czerwinski 4d36cc86eb backend/drm: destroy output immediately
Instead of waiting for the next pageflip, destroy the output immediately
since we can now handle flips for outputs which no longer exist.
Also demote the missing crtc on flip to debug.

Fixes #1739
2019-08-03 15:44:21 +02:00
Simon Ser ca45f4490c Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
2019-07-27 15:49:32 -04:00
Sebastian Krzyszkowiak 415267ac13 backends/x11: Touch support
Closes #1749
2019-07-17 09:23:10 -04:00
Scott Anderson b3f42548d0 backend/drm: Simplify object matching code
We originally used match_obj on planes, but this was largely
unnecessary. Instead, this assigns planes statically at startup.
2019-06-22 11:58:33 +03:00
Greg V d80acadfd8 Support pointer-gestures on Wayland backend 2019-06-21 14:43:28 -04:00
Simon Ser e8057bb60c backend/drm: fallback to drmModeAddFB2 2019-06-07 09:06:11 -04:00
Simon Ser 44ba603c0e backend/drm: hold buffers while scanning out 2019-06-07 09:06:11 -04:00
Simon Ser afe7b207d5 output: fix attach_buffer semantics 2019-06-07 09:06:11 -04:00
Simon Ser e516ea4c79 backend/drm: check format when scanning out DMA-BUF 2019-06-07 09:06:11 -04:00
emersion 96d6fde5dc backend/drm: add basic support for direct scan-out 2019-06-07 09:06:11 -04:00
Simon Ser 947d5ff481 backend/wayland: remove wl_shm
We bind to it but never use it.
2019-05-06 20:51:57 +03:00
Simon Ser 292d20e4c1 backend/wayland: use xdg-decoration-unstable-v1
This allows the toplevel to have proper decorations on compositors that support
xdg-decoration-unstable-v1.
2019-05-06 10:34:41 -06:00
Drew DeVault fd0d7d0907 Add FreeRDP backend for remote desktop support 2019-04-08 08:09:07 -06:00
Brian Ashworth 6b7f5e4010 backend/noop: improve output number handling
This improves the way the output numbers are handled for the noop
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
NOOP-2, which causes an issue since the identifier will also be
identical. With this, the last output is NOOP-3 and the outputs can be
distinguished.
2019-03-15 18:38:12 +02:00
Brian Ashworth c97f0eb0f2 backend/headless: improve output number handling
This improves the way the output numbers are handled for the headless
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
HEADLESS-2, which causes an issue since the identifier will also be
identical. With this, the last output is HEADLESS-3 and the outputs can
be distinguished.
2019-03-15 18:37:56 +02:00
Brian Ashworth b135599e5a backend/x11: improve output number handling
This improves the way the output numbers are handled for the x11
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
X11-2, which causes an issue since the identifier will also be
identical. With this, the last output is X11-3 and the outputs can be
distinguished.
2019-03-15 18:37:35 +02:00
Brian Ashworth 67523fb228 backend/wayland: improve output number handling
This improves the way the output numbers are handled for the wayland
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
`WL-2`, which causes an issue since the identifier will also be
identical. With this, the last output is `WL-3` and the outputs can be
distinguished.
2019-03-15 09:43:40 +02:00
Brian Ashworth 50011e7170 backend/drm: fix modeset on drm fd resume
On DRM resume, such as switching back to a TTY, the output needs to be
modeset to the current mode. However, wlr_output_set_mode will return
early when attempting to set the mode to the current mode. This just
steps around wlr_output_set_mode and calls drm_connector_set_mode
directly.
2019-02-19 16:49:51 +01:00