emersion
ff6c4f80b2
backend/drm: don't insert duplicate custom modes, fix refresh rate
2018-12-16 11:06:46 +01:00
Ryan Walklin
2a3c62b4d2
[WIP][DONTMERGE]Add support for libinput_switch input devices
...
These are used primarily by laptops to signal
the state of the lid (open/closed) and tablet
mode if supported, based on ACPI events.
2018-12-15 14:42:35 +11:00
Scott Anderson
fec88770dd
backend/drm: Fix uninitialized variable
2018-12-09 22:55:53 +13:00
Scott Anderson
efdd4d6ea2
backend/drm: Improve encoder logic
...
This fixes an issue that can occur with DP MST connectors not reporting
any encoders.
2018-12-09 22:48:00 +13:00
emersion
f8056a0350
backend/drm: fix disappeared output indices
...
This commit changes `scan_drm_connectors` to add new outputs to the end of the
list. That way, it's easier to understand what's going on with indices.
When we need to destroy outputs, we now walk the list in reverse order. This
ensures indices remain correct while iterating and removing items from the
list.
We now also make outputs without a CRTC disappear (those are in
WLR_DRM_CONN_NEEDS_MODESET state).
2018-12-09 10:12:52 +01:00
Drew DeVault
20f5fc9e2e
Merge pull request #1413 from emersion/logind-session-logs
...
backend/session/logind: improve logging
2018-12-06 18:03:33 -05:00
emersion
e23fe328a6
backend/session/logind: improve logging
2018-12-06 17:01:17 +01:00
emersion
491f1dbf75
backend/drm: fix VLA overflow
2018-12-04 18:56:29 +01:00
emersion
408e2a77e9
backend/wayland: fix zero-length VLA
2018-11-27 23:18:12 +01:00
Rostislav Pehlivanov
91513c89cd
Fix interlaced mode rejection
2018-11-22 17:52:52 +00:00
Rostislav Pehlivanov
dc9fdd6385
Skip interlaced modes during drm mode detection
...
Fixes #3167
A better solution could be made if there's a need to.
2018-11-21 19:23:48 +00:00
Scott Anderson
d3ee69f76b
backend/x11: Hide cursor with Xfixes
2018-11-13 10:55:03 +13:00
Scott Anderson
70ae76304e
backend/x11: Remove old input functions
...
This also allows us to remove xcb-xkb, since Xinput will now give us the
appropriate XKB modifiers with each event.
2018-11-13 10:55:03 +13:00
Scott Anderson
d89e868cc9
backend/x11: Add new Xinput events
2018-11-13 10:42:02 +13:00
Scott Anderson
88b2d6fe25
backend/x11: Check for xinput extension
2018-11-13 10:41:37 +13:00
Scott Anderson
9c1b87f210
backend/x11: Move atom initilisation earlier
...
There isn't any real reason to delay this until the backend is started.
2018-11-13 10:40:52 +13:00
Scott Anderson
ab2c57984b
backend/x11: Make header order consistent
2018-11-13 10:40:52 +13:00
Scott Anderson
51a283cbe4
backend/x11: Rename xcb_conn to xcb
...
When the Xlib connection is removed, this _conn suffix is going to be
pointless. I'm removing this preemtively for that.
2018-11-13 10:39:24 +13:00
Drew DeVault
77dfac4fa4
Merge pull request #1372 from emersion/config10
...
Use #if instead of #ifdef for wlroots config data
2018-11-12 16:14:18 -05:00
emersion
51bfdd620e
Use #if instead of #ifdef for wlroots config data
...
This prevents some annoying issues when e.g. not including wlr/config.h or
making a typo in the guard name.
2018-11-12 10:12:46 +01:00
emersion
180151ed09
backend/wayland: handle WL_EVENT_WRITABLE for Wayland socket
...
We need to flush when the connection is writable again. This is important in
case the write buffer becomes full. This is also what Weston does [1].
[1]: https://gitlab.freedesktop.org/wayland/weston/blob/master/libweston/compositor-wayland.c#L2593
2018-11-11 21:14:15 +01:00
Scott Anderson
aaff4b8c00
backend/wayland: Make header order consistent
2018-11-11 22:29:35 +13:00
Scott Anderson
bbce92a923
backend/wayland: Move initilisation code earlier
...
The renderer redesign is going to need the render fd before the backend
is fully started, so we have to move the wl registry code to when the
backend is created instead of when it is started.
We also need to stash the wl_keyboard and emit it to library users
later, once they've added their listeners and started the backend.
2018-11-11 18:11:56 +13:00
Scott Anderson
47545cf550
backend/wayland: Use specific wl_global versions
...
Explicitly use the version we support instead of accepting the
compositor's version.
2018-11-11 18:11:56 +13:00
Scott Anderson
4e03802057
backend/wayland: Move registry into backend
...
Registry was a very small file, and is heavily related to the backend,
so there is not point in keeping them separate.
2018-11-11 18:11:56 +13:00
emersion
09550032b7
render: correctly set EGL_RENDERABLE_TYPE
...
This should be set to EGL_OPENGL_ES2_BIT.
Also fixes EGL config attributes in the headless and X11 backends.
2018-11-10 13:20:54 +01:00
emersion
b5125ff328
backend/drm: specify minimum config attributes
...
Since the format used by DRM is GBM_FORMAT_ARGB8888, we need at least a R, G, B
and A channel.
2018-11-04 09:00:55 +01:00
Drew DeVault
70ca7daeb2
Merge pull request #1346 from emersion/fix-schedule-frame-mgpu
...
backend/drm: fix frame scheduling on secondary GPUs
2018-10-30 01:59:25 +01:00
emersion
68362b37a8
backend/drm: fix frame scheduling on secondary GPUs
...
There was a missing copy_drm_surface_mgpu call in drm_connector_schedule_frame
so we asked for a pageflip with an unknown BO, resulting in ENOENT.
Additionally, this commit makes schedule_frame return a bool indicating
failures. This allows schedule_frame_handle_idle_timer to only set
frame_pending to true if a frame has been successfully scheduled. Thus, if a
pageflip fails, rendering won't be blocked forever anymore.
In case a pageflip is already pending, true is returned because a frame has
already been scheduled and will be sent sometime soon.
2018-10-29 20:38:57 +01:00
emersion
443a38bd3f
backend/drm: add WLR_DRM_NO_ATOMIC_GAMMA env variable
...
This allows the legacy interface to be used instead of atomic if needed. This
is a workaround to make some Intel GPUs work (if this variable is unset) as
well as to make some AMD GPUs work (if this variable is set).
2018-10-28 23:43:21 +01:00
Drew DeVault
e0cf97da69
Merge pull request #1307 from emersion/static-analysis
...
Fix a few bugs found by the static analyzer
2018-10-21 19:18:39 +02:00
sghctoma
fa587b8ea9
Increase _POSIX_C_SOURCE to 200112L
...
CLOCK_MONOTONIC appeared in IEEE Std. 1003.1-200x, it was not part of
POSIX.1b (the 1993 version), and FreeBSD treats it accordingly.
2018-10-17 08:33:19 +02:00
emersion
f9eb5df80e
backend: fix use-after-free in wlr_backend_autocreate
...
Found by clang static analyzer.
2018-10-13 10:58:59 +02:00
emersion
b66041a9e5
backend/drm: don't reset conn->pageflip_pending in drm_connector_cleanup
...
If a pageflip is pending before cleanup, it's still pending after. This
is used line 1177: drm_connector_cleanup is called and
conn->pageflip_pending is checked afterwards.
Fixes #1297
2018-10-09 14:54:33 +02:00
Drew DeVault
8488ed2997
Merge pull request #1298 from emersion/output-dangling-idle-frame
...
output: remove idle_frame event source when destroying output
2018-10-09 13:41:04 +02:00
Rouven Czerwinski
77478ac302
backend/drm: set drmEventContext version to 2
...
As per [1] set drmEventContext version to 2, since wlroots does not use the
page_flip_handler2.
[1]: https://s-opensource.org/2017/04/12/libdrm-event-handling-youre-probably-wrong/
2018-10-09 12:34:01 +02:00
emersion
46b1ba386f
output: remove idle_frame event source when destroying output
...
This prevents the idle event to be activated on a destroyed
output.
This also makes the backend responsible for free-ing modes, as it
is the one allocating them and adding them to the list. Note that
the DRM backend (the only one using modes) already frees them.
2018-10-09 10:55:03 +02:00
Scott Anderson
885586a831
Merge pull request #1280 from emersion/drm-link-status
...
backend/drm: add support for the link-status property
2018-10-08 21:01:30 +02:00
emersion
37de179013
backend/drm: fix zero-length VLAs
2018-10-07 13:04:52 +02:00
emersion
776008da69
backend/drm: properly handle GPUs without CRTCs
2018-10-07 12:59:00 +02:00
emersion
ba91422747
output: don't trigger a frame immediately in schedule_frame
...
This desynchronizes our rendering loop with the vblank cycle.
In case a compositor doesn't swap buffers but schedules a frame,
emitting a frame event immediately enters a busy-loop.
Instead, ask the backend to send a frame when appropriate. On
Wayland we can just register a frame callback on our surface. On
DRM we can do a no-op pageflip.
Fixes #617
Fixes swaywm/sway#2748
2018-10-05 16:18:37 +02:00
emersion
eac7c2ad2f
output: add presentation refresh prediction
2018-10-04 22:00:24 +02:00
emersion
b0635bf3e7
Rename get_present_clock to get_presentation clock, use it
2018-10-04 22:00:22 +02:00
emersion
54e1287f30
backend: add get_present_clock
2018-10-04 21:58:17 +02:00
emersion
26b9d6dbb1
output: send present event from all backends
2018-10-04 21:56:38 +02:00
emersion
78389fe722
output: add present event
2018-10-04 21:56:38 +02:00
emersion
f5a147b739
backend/drm: add support for the link-status property
2018-10-04 21:54:27 +02:00
Drew DeVault
841d04db99
Merge pull request #1262 from nyorain/session_fix
...
Improve session handling
2018-10-04 17:36:39 +02:00
nyorain
b4d46aa9c2
Use sd_bus_get_property_trivial & remove numbering
2018-10-04 14:04:06 +02:00
emersion
7ab37bf152
backend/drm: update EDID manufacturers database
2018-10-04 10:58:45 +02:00
