Commit graph

6114 commits

Author SHA1 Message Date
Simon Ser
d17a009062 backend/noop: drop attach_render/rollback_render
We no longer require wlr_output_impl.{attach,rollback}_render to
be populated.
2021-07-29 09:48:33 -04:00
Simon Ser
55ac7e335a backend/drm: fix wrong type for get_cursor_format return values
These are bools but should be pointers.
2021-07-28 16:59:21 -04:00
Simon Ser
c55f70c8b7 backend/drm: stop initializing renderer for parent backend
Unless we're dealing with a multi-GPU setup and the backend being
initialized is secondary, we don't need a renderer nor an allocator.
Stop initializing these.
2021-07-28 22:52:35 +02:00
Simon Ser
c74dc45bb6 backend/drm: drop get_renderer implementation
We can now just rely on the common code for this.
2021-07-28 22:52:35 +02:00
Simon Ser
9b99570869 backend/drm: drop drm_surface_{make,unset}_current 2021-07-28 22:52:35 +02:00
Simon Ser
ebb661532c backend/drm: remove SCANOUT check in drm_connector_test
We only accept SCANOUT, the buffer type should never be set to RENDER.
2021-07-28 22:52:35 +02:00
Simon Ser
f5900c1f00 backend/drm: remove primary swapchain
We can't nuke it completely, we still need it for multi-GPU.
2021-07-28 22:52:35 +02:00
Simon Ser
85d7ad2eef backend/drm: allow legacy scan-out if FB props match
Historically we haven't allowed direct scan-out for legacy KMS,
because legacy misses the functionality to make sure a buffer can
be scanned out. However with renderer v6 the backend can't figure
out anymore whether the buffer comes from its internal swap-chain,
because the backend doesn't have an internal swap-chain.

The legacy KMS API guarantees that the driver won't reject a buffer
as long as it's been allocated with the same parameters as the
previous one. Let's check this in legacy_crtc_test.
2021-07-28 22:52:35 +02:00
Simon Ser
6aadf811aa output: fallback to modifier-less allocation on modeset test failure
Sometimes we allocate a buffer with modifiers but then fail to
perform a modeset with it. This can happen on Intel because of
bandwidth limitations. To mitigate this issue, it's possible to
re-allocate the buffer with modifiers.

Add the logic to do so in wlr_output.
2021-07-28 22:52:35 +02:00
Simon Ser
0fb55c76d0 output: allocate and attach empty buffer on modeset
Some backends need a buffer in order to be able to perform a
modeset.
2021-07-28 22:52:35 +02:00
Simon Ser
1a5b6722a8 output: use pending resolution when allocating swapchain
This allows the swapchain to be created with the correct resolution
during a mode change.
2021-07-28 22:52:35 +02:00
Simon Ser
d6f0fc251e backend/drm: implement get_primary_formats 2021-07-28 22:52:35 +02:00
Simon Ser
d1c931cbe8 output: fallback to XRGB in output_pick_format
This will be necessary for the primary buffer.
2021-07-28 22:52:35 +02:00
Dylan Araps
e5063ef3a3 util/time: make NSEC_PER_SEC static
This fixes static linking with libseat.

Closes #3072
2021-07-28 09:01:59 +02:00
Simon Zeni
6f19295647 render/egl: initialize wlr_egl with EGL_PLATFORM_DEVICE_EXT
Uses the EXT_device_query extension to get the EGL device matching the
requested DRM file descriptor. If the extension is not supported or no device
is found, the EGL device will be retrieved using GBM.

Depends on the EGL_EXT_device_enumeration to get the list of EGL devices.
2021-07-27 20:45:53 +02:00
yuiiio
7667ab73bd
render/egl: fix typo 2021-07-27 00:35:36 +02:00
Simon Ser
770a561bce xwayland: embed wlr_xwayland_server_options in server struct
As more options are added, more fields will be duplicated. Let's
just embed the struct in wlr_xwayland_server so that we don't need
to keep both in sync.
2021-07-27 00:18:11 +02:00
Simon Ser
4b316a3823 xwayland: simplify argv filling logic
Remove fill_arg and replace it with stack-allocations and simple
array-filling.
2021-07-27 00:18:11 +02:00
Simon Ser
3cf2535c23 render/egl: add support for EGL_EXT_device_drm_render_node
This EGL extension has been added in [1]. The upsides are:

- We directly get a render node, instead of having to convert the
  primary node name to a render node name.
- If EGL_DRM_RENDER_NODE_FILE_EXT returns NULL, that means there is
  no render node being used by the driver.

[1]: https://github.com/KhronosGroup/EGL-Registry/pull/127
2021-07-26 11:44:16 -04:00
Simon Ser
ace2eda073 render/egl: set EGL_IMAGE_PRESERVED_KHR
Without setting this the EGL implementation is allowed to perform
destructive actions on the buffer when imported: its contents
become undefined.

This is mostly a pedantic change, because Mesa processes the attrib
and does absolutely nothing with it.
2021-07-23 11:27:17 -04:00
Simon Zeni
04d4fb536d render/wlr_texture: put wlr_texture_from_buffer into the public API 2021-07-22 22:28:24 +02:00
Simon Zeni
0778151f94 types/wlr_buffer: create custom wlr_buffer from wl_resource 2021-07-22 22:28:24 +02:00
Simon Zeni
646a25667e types/wlr_buffer: introduce wlr_buffer_resource_interface
Adds `wlr_buffer_resource_interface` and `wlr_buffer_register_resource_interface`,
which allows a user to register a way to create a wlr_buffer from a specific
wl_resource.
2021-07-22 22:28:24 +02:00
Simon Zeni
f09c88c1b7 types/wlr_buffer: remove wlr_renderer argument from wlr_buffer_from_resource 2021-07-22 22:28:24 +02:00
Simon Ser
2fa47c1837 render: drop wlr_renderer_impl.init_wl_display
Now that we have our own wl_drm implementation, there's no reason
to provide custom renderer hooks to init a wl_display in the
interface. We can just initialize the wl_display generically,
depending on the renderer capabilities.
2021-07-22 14:10:26 -04:00
ayaka
70fb21c35b backend: make DRM and libinput backends optional
Co-authored-by: Simon Ser <contact@emersion.fr>
2021-07-22 09:56:38 -04:00
Simon Ser
66c42f4fcb backend/drm: add DRM_MODE_CONNECTOR_USB to conn_get_name
See 757e26712337 ("drm/uapi: Add USB connector type") in the kernel
tree.
2021-07-21 08:47:35 +02:00
Simon Ser
cc8bc0db20 backend/drm: stop restoring CRTCs on exit
This is the cause of the spurious "drmHandleEvent failed" messages
at exit. restore_drm_outputs calls handle_drm_event in a loop without
checking whether the FD is readable, so drmHandleEvent ends up with a
short read (0 bytes) and returns an error.

The loop's goal is to wait for all queued page-flip events to complete,
to allow drmModeSetCrtc calls to succeed without EBUSY. The
drmModeSetCrtc calls are supposed to restore whatever KMS state we were
started with. But it's not clear from my PoV that restoring the KMS
state on exit is desirable.

KMS clients are supposed to save and restore the (full) KMS state on VT
switch, but not on exit. Leaving our KMS state on exit avoids unnecessary
modesets and allows flicker-free transitions between clients. See [1]
for more details, and note that with Pekka we've concluded that a new
flag to reset some KMS props to their default value on compositor
start-up is the best way forward. As a side note, Weston doesn't restore
the CRTC by does disable the cursor plane on exit (see
drm_output_deinit_planes, I still think disabling the cursor plane
shouldn't be necessary on exit).

Additionally, restore_drm_outputs only a subset of the KMS state.
Gamma and other atomic properties aren't accounted for. If the previous
KMS client had some outputs disabled, restore_drm_outputs would restore
a garbage mode.

[1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
2021-07-20 15:33:26 +02:00
Simon Ser
8afb4d8bf0 buffer: re-use wlr_shm_client_buffer
The first time wlr_buffer_from_resource is called with a wl_buffer
resource that originates from wl_shm, create a new
wlr_shm_client_buffer as usual. If wlr_buffer_from_resource is called
multiple times, re-use the existing wlr_shm_client_buffer.

This commit changes how the wlr_shm_client_buffer lifetime is managed:
previously it was destroyed as soon as the wlr_buffer was released.
With this commit it's destroyed when the wl_buffer resource is.

Apart from de-duplicating wlr_shm_client_buffer creations, this allows
to easily track when a wlr_shm_client_buffer is re-used. This is useful
for the renderer and the backends, e.g. the Pixman renderer can keep
using the same Pixman image if the buffer is re-used. In the future,
this will also allow to re-use resources in the Wayland and X11 backends
(remote wl_buffer objects for Wayland, pixmaps for X11).
2021-07-19 13:13:10 -04:00
Simon Ser
f94eb174c7 backend/drm: fix NULL data in handle_drm_event
wl_event_loop_add_fd was called with a NULL data argument, but the
function expects the data argument to be set to the wlr_drm_backend.

Fixes: 053ebe7c27 ("backend/drm: terminate display on drmHandleEvent failure")
2021-07-19 09:01:21 -04:00
Vyivel
a93b18dbd5 input/pointer: send axis source once per frame
Only one wl_pointer.axis_source event is permitted per frame, according
to the Wayland specification.

Fixes https://github.com/swaywm/wlroots/issues/2973
2021-07-19 12:00:31 +02:00
Simon Ser
a47f89cf7c backend/wayland: properly cleanup wlr_wl_pointer
We were missing destroy calls for gestures, and we were only
destroying the relative pointer on output destroy.
2021-07-13 09:20:25 -04:00
Simon Ser
bcd5d8504c output: remove wlr_output_impl.export_dmabuf
No backend is using it anymore.
2021-07-12 13:29:03 -04:00
Simon Ser
709190c4c8 backend/drm: remove wlr_output_impl.export_dmabuf
This is now provided by the generic wlr_output implementation.
2021-07-12 13:29:03 -04:00
Simon Ser
aec062d0d3 backend/headless: remove wlr_output_impl.export_dmabuf
This is now provided by the generic wlr_output implementation.
2021-07-12 13:29:03 -04:00
Simon Ser
87e8c60faf output: add generic wlr_output_export_dmabuf implementation
When wlr_output manages its own swap-chain, there's no need to
hook into the backend to grab DMA-BUFs. Instead, maintain a
wlr_output.front_buffer field with the latest committed buffer.
2021-07-12 13:29:03 -04:00
Simon Ser
28aa803916 buffer: drop resource arg from wlr_client_buffer_create
This function doesn't need the wl_resource anymore.

In the failure paths, wlr_buffer_unlock in surface_apply_damage
will take care of sending wl_buffer.release.
2021-07-12 09:19:18 -04:00
Simon Ser
5544973814 render/gles2: disable blending opportunistically
We don't always need to enable blending: when the texture doesn't
have alpha or when the color is opaque, we can disable it.
2021-07-12 09:16:09 -04:00
Simon Ser
9dba176e8d render/gles2: set has_alpha for DMA-BUFs
Use our internal pixel format table to figure out whether an
imported DMA-BUF has alpha.
2021-07-12 09:16:09 -04:00
Simon Ser
9b70eab194 render/gles2: rename wlr_egl.exts to better match Khronos
Khronos refers to extensions with their namespace as a prefix in
uppercase. Change our naming to align with Khronos conventions.
This also makes grepping easier.
2021-07-12 09:13:49 -04:00
Simon Ser
4c51a0f6eb render/egl: rename wlr_egl.exts to better match Khronos
Khronos refers to extensions with their namespace as a prefix in
uppercase. Change our naming to align with Khronos conventions.
This also makes grepping easier.
2021-07-12 09:13:49 -04:00
Simon Ser
4554f17377 buffer: drop wlr_client_buffer.resource 2021-07-09 17:25:02 -04:00
Simon Ser
d7c68ce632 buffer: stop using resource in client_buffer_get_dmabuf
Instead, delegate to the source wlr_buffer.
2021-07-09 17:25:02 -04:00
Simon Ser
a0baba4fa0 buffer: add wlr_client_buffer.source
This stores a weak reference to the source buffer.
2021-07-09 17:25:02 -04:00
Simon Ser
0abb67c478 buffer: stop using source resource in wlr_client_buffer_apply_damage
This is the first step towards dropping wlr_client_buffer.resource.
2021-07-09 17:25:02 -04:00
Simon Ser
7b25b0ff88 buffer: rename wlr_client_buffer variables to client_buffer
We often juggle between wlr_buffer and wlr_client_buffer variables.
Use a consistent naming: "buffer" for wlr_buffer and "client_buffer"
for wlr_client_buffer.
2021-07-09 17:25:02 -04:00
Simon Zeni
60f4d8f409 types/wlr_buffer: remove wlr_resource_get_buffer_size 2021-07-09 23:16:39 +02:00
Simon Zeni
d086501fba types/wlr_surface: get buffer size from wlr_buffer_import 2021-07-09 23:16:39 +02:00
Simon Zeni
6d8029b07e types/wlr_buffer: split wlr_client_buffer_import function
`wlr_client_buffer_import` is splitted in two distincts function:
	- wlr_buffer_from_resource, which transforms a wl_resource into
	  a wlr_buffer
	- wlr_client_buffer_create, which creates a wlr_client_buffer
	  from a wlr_buffer by creating a texture from it and copying its
	  wl_resource
2021-07-09 23:16:39 +02:00
Simon Ser
f67cfb2ce2 backend/drm: remove backend arg from wlr_drm_interface.crtc_commit
The callee can just get it from the wlr_drm_connector.
2021-07-09 15:31:19 -04:00