46b1ba386f
output: remove idle_frame event source when destroying output
...
This prevents the idle event to be activated on a destroyed
output.
This also makes the backend responsible for free-ing modes, as it
is the one allocating them and adding them to the list. Note that
the DRM backend (the only one using modes) already frees them.
2018-10-09 10:55:03 +02:00
8d0997a5e7
Better placement of visibility check
2018-10-08 15:58:24 +02:00
6a9995d18c
Fix cursor visibility on surface commit
2018-10-07 21:26:38 +02:00
5afaccedfc
output: fix busy loop when backend doesn't implement schedule_frame
2018-10-05 16:26:40 +02:00
ba91422747
output: don't trigger a frame immediately in schedule_frame
...
This desynchronizes our rendering loop with the vblank cycle.
In case a compositor doesn't swap buffers but schedules a frame,
emitting a frame event immediately enters a busy-loop.
Instead, ask the backend to send a frame when appropriate. On
Wayland we can just register a frame callback on our surface. On
DRM we can do a no-op pageflip.
Fixes #617
Fixes swaywm/sway#2748
2018-10-05 16:18:37 +02:00
1e70b4cea2
Revert "Prevent excessive frame events when compositor doesn't swap buffers"
2018-10-05 07:37:41 -04:00
b7b781ff44
Prevent excessive frame events when compositor doesn't swap buffers
...
When we send an output frame event, we should not assume that the
compositor is going to call wlr_output_swap_buffers in response to it.
If the compositor does not swap the buffers, the idle event source still
exists and is executed every time the Wayland event loop becomes idle,
which means we send frame events repeatedly until the buffers are
swapped.
This moves the removal of the idle event source out of
wlr_output_swap_buffers and into wlr_output_send_frame, where it is
guaranteed to be removed.
2018-10-05 20:14:34 +10:00
eac7c2ad2f
output: add presentation refresh prediction
2018-10-04 22:00:24 +02:00
b0635bf3e7
Rename get_present_clock to get_presentation clock, use it
2018-10-04 22:00:22 +02:00
abddfc99f2
output: fix clock_gettime return value handling
2018-10-04 21:58:17 +02:00
54e1287f30
backend: add get_present_clock
2018-10-04 21:58:17 +02:00
26b9d6dbb1
output: send present event from all backends
2018-10-04 21:56:38 +02:00
78389fe722
output: add present event
2018-10-04 21:56:38 +02:00
2beb68007e
output: make gamma size a size_t and gamma table const
2018-10-03 10:36:33 +02:00
928572c14d
output: add wlr_output_set_hardware_cursors_enabled
...
And use it in screencopy.
2018-09-18 11:37:37 +02:00
df991a55ab
Merge pull request #1241 from emersion/output-enable-error-checking
...
output: make wlr_output_enable return a bool
2018-09-14 21:14:18 -04:00
cb293f09e7
output: make wlr_output_enable return a bool
2018-09-14 18:18:07 +02:00
524702eb16
output: introduce WLR_NO_HARDWARE_CURSORS
2018-09-14 18:07:21 +02:00
017cfb0b86
backend/drm: log when de-allocating CRTC
2018-09-04 19:44:44 +02:00
a149c2370a
Implement wlr-gamma-control-unstable-v1
2018-08-02 23:33:04 +01:00
9a6f77fc2c
tablet-v2: fix merge commits and test again
...
There were a few issues after rebase, that the merge algorithm didn't
throw at my face:
wlr_output did a check on the actual role, not a string anymore, so that
had to go to allow tablet-v2 to set cursor surfaces.
A few L_DEBUG/L_ERRORs were still around
There was a user-after-free in tablet-group free()ing, probably after
insufficient testing from a previous feedback pass
2018-07-14 10:29:22 +02:00
e226e2c011
Missed some old wlr_log calls
2018-07-11 18:36:31 -04:00
c0b4217fce
Merge pull request #1116 from emersion/surface-role
...
surface: replace wlr_surface_set_role_committed with wlr_surface_role
2018-07-11 15:27:42 -07:00
7cbef15206
util: add wlr_ prefix to log symbols
2018-07-09 22:49:54 +01:00
deeca53e33
Rename wl_resources to resource, wl_global to global
2018-07-08 19:21:31 +01:00
5fe50b9a28
output: make wl_output resources inert
2018-07-07 23:02:08 +01:00
33db4263a0
surface: replace wlr_surface_set_role_committed with wlr_surface_role
2018-07-07 22:45:16 +01:00
f440708274
output: fix cursor attach coords handling
2018-07-04 19:12:18 +01:00
78555abba3
surface: move position and scale out of wlr_surface_state
2018-07-04 19:12:17 +01:00
3c0d672ebd
surface: make pending and current embedded structs
2018-07-04 19:12:17 +01:00
b3313b7f39
wlr_output: fix scope for 'now'
...
'when' points to now that was defined in the if, so compiler could reuse
that memory area by the time 'when' is called
Found through static analysis.
2018-06-30 11:38:21 +09:00
57548b557a
Merge branch 'master' into screencontent
2018-06-17 14:49:18 +01:00
0378d143d9
surface: remove wlr_surface.texture
...
The texture is managed by the surface's wlr_buffer now. In
particular, the buffer can destroy the texture early if it becomes
invalid.
2018-06-13 19:38:10 +01:00
21928cbe61
Merge branch 'master' into screencontent
2018-05-31 12:33:27 +01:00
e26f4dff98
export-dmabuf: wait for the frame to be ready, send timestamp
2018-05-29 18:47:17 +01:00
9e26808c28
output, backend/drm: add wlr_output_export_dmabuf
2018-05-29 18:45:45 +01:00
e849a68e6e
output: correctly clear screen when fullscreened
2018-05-20 13:44:18 +01:00
dbba1311b7
output: fix lingering hardware cursors
2018-05-15 18:13:26 +01:00
13098a18ea
Fix hardware cursors scale & transform
2018-05-09 19:58:18 +01:00
caf9f9022c
Merge pull request #936 from emersion/full-hardware-cursors
...
output: always use hardware cursors if available
2018-05-04 19:00:45 +01:00
7843a48432
output: simplify and update code style
2018-05-03 18:46:17 +01:00
6b3eac37f1
output: assert move_cursor if set_cursor is available
2018-05-02 15:04:35 +01:00
225d182765
output: always use hardware cursors if available
...
This changes the `wlr_output_impl.set_cursor` function to take a
`wlr_texture` instead of a byte buffer. This simplifies the
DRM and Wayland backends since they were creating textures from
the byte buffer anyway.
With this commit, performance should be improved when moving the
cursor since outputs don't need to be re-rendered anymore.
2018-05-01 21:38:04 +01:00
625a7a48dc
Don't use the wlr_ prefix for static functions
2018-04-25 23:51:00 +01:00
94fa6c88f4
output: don't emit the mode event if it hasn't changed
...
This also fixes #535 .
2018-04-18 00:15:25 +01:00
1b802d9251
Make wlr_renderer_scissor take normal coords instead of upside-down ones
2018-04-12 19:38:33 -04:00
31c8bdc277
Fix wlr_output_transform_compose
2018-04-12 19:05:05 -04:00
c63d94483b
Redesign wlr_texture
...
- Textures are now immutable (apart from those created from raw
pixels), no more invalid textures
- Move all wl_drm stuff in wlr_renderer
- Most of wlr_texture fields are now private
- Remove some duplicated DMA-BUF code in the DRM backend
- Add more assertions
- Stride is now always given as bytes rather than pixels
- Drop wl_shm functions
Fun fact: this patch has been written 10,000 meters up in the air.
2018-03-24 23:48:32 -04:00
c41de2d1be
render: split render.h into wlr_renderer.h and wlr_texture.h
2018-03-19 23:16:29 +01:00
7894fca224
matrix: rename wlr_matrix_texture to wlr_matrix_projection
2018-03-15 21:26:45 +01:00
824a95ad19
matrix: use 2D matrices
2018-03-15 15:33:58 +01:00
d26b67cb06
matrix: unify API, don't use array pointers
2018-03-15 11:10:56 +01:00
b6a3f240c7
matrix: move to types/
2018-03-15 09:11:27 +01:00
8e3d294d6a
output: fix trailing cursor at (0, 0) on startup
2018-03-11 11:21:40 +01:00
a951fbb264
output: don't move hidden cursors
...
When using the DRM backend and multiple outputs, that reduces the
number of commits.
2018-03-07 10:22:39 +01:00
0820557c8c
Merge pull request #693 from emersion/fix-output-bind-multiple
...
Fix clients binding multiple times to the same output
2018-03-01 11:23:41 -05:00
90148e64ab
Fix clients binding multiple times to the same output
2018-03-01 10:19:48 +01:00
d08792bfff
Add alpha to wlr_render_with_matrix
...
so we can use the alpha channel to e.g. blend in textures
2018-02-25 13:47:48 +01:00
1d9be89e2d
Revert "ELF Visibility"
2018-02-19 18:01:27 -05:00
86269052eb
Explicitly export EFL symbols
2018-02-19 14:26:40 +13:00
392d54a35d
Wrap wl_resource_get_user_data into safer helper functions
...
This ensures we're not incorrectly casting a resource.
Fixes #628
2018-02-13 23:48:46 +01:00
c2e1474010
Reformat all #include directives
2018-02-12 21:29:23 +01:00
36ead80cd1
Make wlr_signal_emit_safe private
2018-02-12 19:52:47 +01:00
10ecf871f2
Remove wlr_backend.events.{output_remove,device_remove}
2018-02-12 10:36:43 +01:00
5e58d46cc1
Add wlr_signal_emit_safe
2018-02-12 09:12:31 +01:00
bf6d245400
Swap buffers with damage
2018-02-09 22:54:14 +01:00
faa57341ca
output: replace raw GL calls by wlr_renderer_* calls
2018-02-03 10:01:42 +01:00
3d3ea32137
Merge remote-tracking branch 'upstream/master' into output-damage
2018-02-03 00:15:44 +01:00
8eed857292
output: add destroy signal for wlr_output_cursor
2018-02-01 12:08:35 +01:00
edb4c8d858
output: damage whole output when fullscreen surface size changes
2018-01-30 22:06:10 +01:00
a295c805c4
output: fix output_damage_whole for scaled outputs
2018-01-30 21:42:12 +01:00
babdd6ccf7
backend: fix use-after-free when destroying backends
...
The backend destroy signal is emitted before the output_remove
signal is. When the destroy signal is emitted listeners remove
their output_remove listener, so the output_remove signal is never
received and listeners have an invalid output pointer.
The correct way to solve this would be to remove the output_remove
signal completely and use the wlr_output.events.destroy signal
instead. This isn't yet possible because wl_signal_emit is unsafe
and listeners cannot be removed in listeners.
2018-01-30 19:45:57 +01:00
704130cc11
output: fix performance issues with wlr_output_schedule_frame
2018-01-30 14:45:02 +01:00
d498855b9d
backend/drm: fix hw cursor position on rotated and scaled outputs
...
output: add wlr_output_transformed_resolution
2018-01-30 10:23:35 +01:00
2cc989e097
output: restrict provided damage to output bounds
2018-01-29 23:21:30 +01:00
7881d039b6
rootston: fix output_damage_whole
...
This should fix artifacts when leaving fullscreen on rotated outputs.
2018-01-28 21:58:02 +01:00
485aa87468
output: fix fullscreen on transformed outputs
2018-01-28 10:40:38 +01:00
7adf13e284
Fix flickering when switching VT
2018-01-27 11:16:42 +01:00
8d58ed502b
output: add wlr_output_schedule_frame
2018-01-26 22:39:23 +01:00
ece2c1e4e2
Damage tracking for transformed outputs
2018-01-26 22:11:09 +01:00
6281deb90f
Merge remote-tracking branch 'upstream/master' into output-damage
2018-01-24 14:48:01 +01:00
f946c10cb1
re-adds wlr_output_update_enabled
...
Re-add the wlr_output_update_enabled to make sure
wlr_output::events.enable is called when the output enabled state
changes.
2018-01-24 10:23:48 +01:00
3cf7225cec
decouples outputenable state and wl_output global
...
This decouples wlr_output_enable and the wl_global.
The previously internal functions wlr_output_(destroy/create)_global are
exposed and used automatically in the wlr_output_layout to create/tear
down the global.
The compositor can handle them itself if it wants to, but I think this
is the right moment to create/destroy the wl_output when the
wlr_output_layout is used.
2018-01-23 17:40:12 +01:00
0365b587f0
output: add damage tracking via buffer age
2018-01-21 00:06:35 +01:00
4ca38b84ed
backend/drm: fix hardware cursors not moving
...
This adds back `wlr_output::needs_swap`. This allows a backend to
request buffer swaps even if the output isn't damaged. This is
needed by the DRM backend to trigger pageflips when the cursor
moves.
2018-01-20 16:43:14 +01:00
e29a0df8c1
output: fix software cursors damage tracking
2018-01-19 14:08:47 +01:00
a0f24b809e
output: add damage event
2018-01-19 13:13:46 +01:00
443bd4cd89
output: fullscreen surface damage tracking
2018-01-19 11:20:27 +01:00
f061a1da63
output: fix software cursor artifacts
2018-01-18 22:18:53 +01:00
59ba8f35ed
rootston: use surface damage
2018-01-18 21:34:10 +01:00
bde255933e
output: add wlr_output::damage, fixes #572
2018-01-18 19:47:21 +01:00
0eebaf98d0
drm: do not pageflip when enabling output
2018-01-15 21:49:37 +01:00
8ebd7d4dbe
output: rename resolution event to mode
2018-01-06 12:42:32 +01:00
d9ecfbaf32
Add wlr_output enable event
2018-01-04 14:51:36 +01:00
771263380c
Add wlr_output::enabled
2018-01-04 12:46:15 +01:00
b23bd8ea28
Merge pull request #544 from emersion/fix-views-outside-output-layout
...
Fix views outside output layout
2018-01-01 11:45:08 -05:00
9ac9ba861f
Free fullscreen surface and cursors when destroying output
2017-12-31 13:00:35 +01:00
1fe1d64042
Fix views outside output layout
2017-12-31 12:49:06 +01:00
6e9cef4ed6
Don't send custom mode info twice on DRM refresh
2017-12-28 11:12:44 -06:00
f56ce11aa0
Fixes #535 send mode info on DRM refresh once
...
When DRM refreshed, wlr_output_set_mode is called. It would then call
the DRM set_mode callback which sends the updated matrix and mode info.
However once that call completed it would then immediantly send the
information again. This is handled poorly by xwayland, causing it to
scale up the clients twice.
2017-12-28 11:12:44 -06:00
e737f65e38
Fix cursor on transformed output with DRM backend
2017-12-26 18:16:37 +01:00
01cefbb868
Output fixes
...
Fixes setting a hardware cursor image twice (used to fallback to
software cursor) and destroy handlers.
2017-12-19 11:06:09 +01:00
d654a12b2e
remove display_destroy unlisten before output free
2017-12-18 16:24:56 -05:00
c59210ad17
remove display destroy when output is destroyed
2017-12-18 15:10:32 -05:00
0256de0002
Add full refresh rate support to custom modes
2017-12-17 18:02:55 +01:00
95fddf2fa8
s/L_INFO/L_DEBUG/ @ software cursor fallback
2017-12-16 09:56:30 -05:00
80b0b327de
Remove fractional output PR artifact
2017-12-15 17:14:30 +01:00
51db087210
Introduce fractional scaling
2017-12-15 01:00:03 +01:00
23fb663ea4
Merge pull request #453 from emersion/surface-transform
...
Add surface transforms support
2017-12-14 14:43:04 -05:00
466e86b7b2
Merge branch 'master' into surface-transform
2017-12-14 20:31:18 +01:00
75ef7860bb
Merge branch 'master' into display-destroy
2017-12-14 20:29:30 +01:00
257559d890
Remove output instead of terminating display when a wayland backend view closed
2017-12-13 21:48:59 +01:00
3b4b8953d9
Update output layout when scale or transform changes
2017-12-12 21:58:00 +01:00
c67a5824b8
Merge branch 'master' into display-destroy
2017-12-11 16:14:03 +01:00
529675b7b0
Add wlr_output_set_custom_mode
2017-12-11 12:14:23 +01:00
15bb9a53b4
Fix unscaled cursor sx, sy
2017-12-08 14:40:57 +01:00
5dc303fc26
Fix client cursors hotspot on scaled outputs
2017-12-08 14:33:02 +01:00
c5fa415a03
Send wl_surface.{enter,leave} to cursor surfaces
2017-12-08 14:23:33 +01:00
0e066f0d76
Listen to display destroy in output
2017-12-07 01:12:04 +01:00
dac0233804
Send new output to clients when changing transform
2017-12-06 16:54:08 +01:00
bf2b58eb6d
Add wlr_output_set_scale
...
Fixes #465
2017-12-06 16:36:46 +01:00
6a69b4419f
Make wlr_output_transform_* functions public, refactoring
2017-12-01 09:15:33 +01:00
5d7eb438d9
Merge pull request #437 from emersion/fullscreen
...
Fullscreen support
2017-11-30 03:25:05 -05:00
0781f6e483
Fix initial hardware cursor position
2017-11-29 00:26:55 +01:00
cc2468923b
Fix non-HiDPI-aware fullscreen surface rendering in wlr_output
2017-11-21 21:12:12 +01:00
3262661e1e
Fix HiDPI support
2017-11-21 20:58:15 +01:00
5a664e1e46
Fix messed up outputs after fullscreen
2017-11-21 18:43:22 +01:00
dcb168914e
Merge branch 'master' into fullscreen
2017-11-21 18:34:12 +01:00
a268f57ed5
Forgot a call to glClear
2017-11-20 21:05:05 +01:00
54f1135c05
Fix fullscreen in xdg-shell
2017-11-20 20:53:13 +01:00
80998cdf57
Add support for fullscreen xwayland views
2017-11-20 17:58:26 +01:00
b04a9a248d
Initial fullscreen support
2017-11-20 17:27:36 +01:00
016744ef4d
Refactor wlr_list inside wlroots
2017-11-19 00:17:40 +01:00
bf1f461eba
Call wl_output_send_done when current mode is updated
2017-11-15 22:35:16 +01:00
2f6cfe4057
Fix software cursors on scaled outputs
...
There was an issue where it would only work within the boundaries of the
unscaled resolution.
2017-11-04 11:47:34 -04:00
6d8e1abfc0
Improve input sensitivity
...
We now use doubles until the last minute, which makes it so we can move
the pointer more precisely. This also includes a fix for tablet tools,
which move absolutely and sometimes do not update the X or Y axis.
2017-11-04 01:35:12 -04:00
86b8729998
Merge remote-tracking branch 'origin/master' into hidpi
2017-11-02 23:34:02 -04:00
ca8cf7d48d
Rethink HiDPI output layouts, fixes everything
...
Except for subsurfaces not rendering at the right scale. But that part
is (somewhat) easy.
2017-11-02 23:17:39 -04:00
f8de7aa0fd
Add checks for wl_resource_create
2017-11-02 23:14:24 +01:00
0384c9c094
Process surface position for software cursor hotspots
2017-11-02 19:24:48 +01:00
b46d2a8b33
Fix wlr_output_cursor_destroy
2017-11-02 11:42:42 +01:00
d11973ed7d
Fix disabled cursors
2017-11-02 11:37:43 +01:00
e18460c981
Add wlr_output.needs_swap
2017-11-01 20:08:15 +01:00
a15b35aa10
Remove mysterious hotspot switch in DRM backend
2017-11-01 14:36:58 +01:00
60c018c017
Fix hidden software cursors, fix cursor transformations on DRM backend
2017-11-01 14:25:41 +01:00
ed74f473d6
Fix various rebase-related bugs
2017-11-01 08:57:30 -04:00
8c0929cfb3
Fix backwards bit banging
2017-11-01 08:51:59 -04:00
c8f97a3a2c
Use surface matrix for software cursors
...
A similar change should probably be applied to hardware cursors, though
more complicated. Also, this doesn't actually fix the issue where the
cursor is too small when over a scale=2 surface. Apparently they don't
set their cursor scales to 2. Seems like a client bug? idk
2017-11-01 08:51:59 -04:00
a6930cd8ea
Handle output enter/leave correctly
2017-11-01 08:51:59 -04:00
9861add146
Send surface enter output events to clients
2017-11-01 08:50:33 -04:00
emersion
ixru
Drew DeVault
Ryan Dwyer
Markus Ongyerth
Dominique Martinet
Guido Günther
Scott Anderson
Timidger
Tony Crisci