Commit Graph

648 Commits

Author SHA1 Message Date
emersion cb293f09e7 output: make wlr_output_enable return a bool 2018-09-14 18:18:07 +02:00
Drew DeVault ca331c0468
Merge pull request #1235 from emersion/dealloc-unused-crtcs
backend/drm: de-allocate unused CRTCs
2018-09-10 21:51:36 -04:00
Drew DeVault 7ba50469e0
Merge pull request #1205 from sghctoma/fix-freebsd-direct-session
Add drmSetMaster and drmDropMaster calls to FreeBSD direct session
2018-09-10 21:11:22 -04:00
emersion 1fcecd68df backend/drm: de-allocate unused CRTCs
They can be re-used by another output after a subsequent hotplug.
2018-09-10 18:46:30 +02:00
mntmn e1c91884fb fix cursor loss w/ legacy drm and software cursor (tested on etnaviv) 2018-09-10 17:30:26 +02:00
sghctoma ba5df0d21d Fix build failure on non-FreeBSD systems
Accidentally included the FreeBSD-specific dev/evdev/input.h file on
other systems too. This commit fixes that.
2018-09-07 17:44:48 +02:00
sghctoma 7a5d3c4d3b Implement device type discovery using ioctl calls
This commit implements device type discovery by calling two ioctls
(DRM_IOCTL_VERSION and EVIOCGVERSION) on the device. These iocts are
specific to drm and input devices respectively, therefore we can
determine the device type based on which one returns an error.
2018-09-07 16:37:25 +02:00
sghctoma bbeed1bd31 Merge remote-tracking branch 'upstream/master' into fix-freebsd-direct-session 2018-09-07 15:45:20 +02:00
emersion 8a6bdc193d backend/drm: damage outputs when switching CRTCs 2018-09-04 23:10:37 +02:00
emersion 1342393632 backend/drm: cosmetic enhancements 2018-09-04 23:08:45 +02:00
emersion 5b13b8a12c backend/drm: consider continue not using resources
Fixes #1230
2018-09-04 22:57:09 +02:00
emersion fb94f03b43 backend/drm: prevent use of uninitialized data 2018-09-04 22:50:59 +02:00
emersion d605b2ea07 backend/drm: remove unused if 2018-09-04 22:49:54 +02:00
emersion 017cfb0b86 backend/drm: log when de-allocating CRTC 2018-09-04 19:44:44 +02:00
emersion b877daded1 backend/drm: better hotplug handling
This commit handles better situations in which the number of
connected outputs is greater than the number of available CRTCs.
It'll enable as many outputs as possible, and transfer CRTCs to
outputs that need one on unplug.

This changes CRTC and plane reallocation to happen after scanning
DRM connectors instead of on modeset.

This cleanups CRTCs and planes on unplug to allow them to be
re-used for other outputs.

On modeset, if an output doesn't have a CRTC, the desired mode is
saved and used later when the output gains a CRTC.

Future work includes giving priority to enabled outputs over
disabled ones for CRTC allocation. This requires the compositor to
know about all outputs (even outputs without CRTCs) to properly
modeset outputs enabled in the compositor config file and disable
outputs disabled in the config file.
2018-09-04 15:09:07 +02:00
sghctoma d948bffd3e Activate last active VT after compositor exit
The VT the compositor was started from was not activated after exiting
the compositor, which resulted in arriving on a blank VT. This commit
fixes that by introducing a new field in direct_session struct that
stores the last active VT so that it can be activated in
direct_session_destroy.
2018-09-02 20:28:06 +02:00
sghctoma 3b2b8c1844 Merge remote-tracking branch 'upstream/master' into fix-freebsd-direct-session 2018-09-02 18:32:31 +02:00
random human 7bc2657984
Free unused pointer in x11/backend.c 2018-09-02 20:52:09 +05:30
emersion 95d05acda5 backend/drm: fix invalid VLA size in scan_drm_connectors
I failed to see this issue with Valgrind because of the +1.
2018-09-02 10:11:23 +02:00
emersion ef88df2142 backend/drm: emit new_output after scanning connectors
This prevents receiving modesetting requests from the compositor
while we don't have the whole picture (ie. while we haven't yet
scanned all connectors).

This also makes connectors without CRTCs disabled (they can't be
enabled yet even if some CRTCs are free'd -- this is future work).
2018-09-02 01:03:20 +02:00
emersion e84f01168d backend/drm: allow disabling outputs in NEEDS_MODESET state
This correctly frees CRTCs when disabling outputs without setting
a mode.
2018-09-01 23:43:16 +02:00
random human 8589ae19de Fix bugs listed by clang's static analyzer
A few pedantic changes and unused variables (1-4), and genuine bugs (5,
6).

The reports with the corresponding files and lines numbers are as
follows.

1. backend/libinput/tablet_pad.c@31,44,57
"Allocator sizeof operand mismatch"
"Result of 'calloc' is converted to a pointer of type 'unsigned int',
which is incompatible with sizeof operand type 'int'"

2. types/tablet_v2/wlr_tablet_v2_pad.c@371
"Allocator sizeof operand mismatch"
"Result of 'calloc' is converted to a pointer of type 'uint32_t', which
is incompatible with sizeof operand type 'int'"

3. types/wlr_cursor.c@335
"Dead initialization"
"Value stored to 'dx'/'dy' during its initialization is never read"

4. rootston/xdg_shell.c@510
"Dead initialization"
"Value stored to 'desktop' during its initialization is never read"

5. types/tablet_v2/wlr_tablet_v2_pad.c@475
"Dereference of null pointer"
"Access to field 'strips' results in a dereference of a null pointer
(loaded from field 'current_client')"

The boolean logic was incorrect (c.f. the check in the following
function).

6. examples/idle.c@163,174,182
"Uninitialized argument value"
"1st function call argument is an uninitialized value"

If close_timeout != 0, but simulate_activity_timeout >= close_timeout,
the program would segfault at pthread_cancel(t1).
2018-08-31 19:41:18 +02:00
sghctoma 2bd6fbf20e Fix that major(st_rdev) have no meaning on FreeBSD
The major device number does not indicate the device type on FreeBSD,
and AFAIK the only way to differentiate between DRM, input, and other
devices is checking the fd path. This commit implements that.

The drmDropmaster and drmSetmaster calls are necessary, because the
implicit drop (that should occur when the DRM fd is closed) seems not
to be working in some scenarios (e.g. if you have a tmux session
running - maybe the fd is retained somehow by tmux?). This is a
problem, because once you exit the compositor, you can't start it (or
any other program that wants to be DRM master) again until you close
all your tmux sessions.
2018-08-30 11:15:39 +02:00
Drew DeVault 633663cdde Use legacy modesetting for gamma control
It doesn't look like there's any motion on a fix from the AMDGPU side,
and using the legacy interface for this isn't so bad.
2018-08-29 23:05:38 +02:00
Alexander Bakker 221d412824 Init the new destroy signals added by #1200 2018-08-27 18:21:36 +02:00
Alexander Bakker 20db29779e Add destroy signals to types that are destroyed by wl_display_destroy 2018-08-26 23:23:12 +02:00
Scott Anderson fd3fa760d3 Revert "Revert "Merge pull request #1194 from ascent12/meson_feature""
This reverts commit 9c886f20b9.
2018-08-24 19:35:02 +12:00
Drew DeVault 9c886f20b9 Revert "Merge pull request #1194 from ascent12/meson_feature"
This breaks wlroots when used as a meson subproject.

This reverts commit dea311992e, reversing
changes made to 6db9c4b746.
2018-08-23 21:00:58 -04:00
Scott Anderson 784c20c82f Use new options for X11 backend and Xwayland 2018-08-22 20:27:37 +12:00
Scott Anderson 94ed2fc7bb Use feature options for libcap/logind
We now use a combo choice between systemd/elogind as they are mutually
exclusive anyway.
2018-08-22 19:53:00 +12:00
emersion 7a3f7b3c8a backend/drm: add support for DRM_MODE_CONNECTOR_DPI 2018-08-21 13:05:38 +01:00
emersion d66d33f5a2
Merge pull request #1188 from emersion/freebsd-fixes
Fix build on FreeBSD
2018-08-16 11:02:21 +01:00
emersion f86f1daf9a Fix build on FreeBSD 2018-08-16 10:54:45 +01:00
sdilts 8e7df5eb88 Fix xcb_create_window parameters
Set the window width and height, not the location of the window.
2018-08-10 18:05:34 -06:00
sdilts da79fef5f7 Add guard for changing the size of X11 backend windows
Events that set the window to either a width or height of zero are now
ignored and logged.
2018-08-09 22:09:48 -06:00
sdilts 55cca6deaa Set default output size for X11 backend
Fixes issue #1170
Also set the created window size to match the output size.
2018-08-09 22:05:18 -06:00
Ilia Bozhinov cb42e16f64 session: load GPU devices even if they have zero crtcs/connectors/encoders
On some systems (most notably laptops with two GPUs) there are GPUs that
don't have attached outputs. However, we still want to load those GPUs
because they could still be used by the compositor for rendering.
2018-08-08 07:34:12 +03:00
Scott Anderson 2d8f53affd Check for DRM prime
This will indicate the user properly when multi-GPU is not supported by
their GPU driver.
2018-08-05 18:25:25 +12:00
Scott Anderson 1a2b3445dc Remove unused data from gbm_bo userdata
These aren't used anymore and crashes when the gbm_bo tries to get
destroyed (e.g. on hotplug).
2018-08-04 17:02:53 +12:00
Scott Anderson 4bee710c30 Fix hardware cursor on secondary GPU
Create rendering resources on parent GPU, so that we can sample the
passed in texture properly. The cursor buffer needs to remain on the
same GPU.
2018-08-04 15:08:28 +12:00
Mariusz Bialonczyk e547e55be0 multi-gpu: do not flip screens on secondary GPU
All screens on secondary GPU in multiple GPU configurations
was flipped 180.

The flipped screens was always on secondary card (the primary card
was always correct).

Tested on nouveau with:
WLR_DRM_DEVICES=/dev/dri/card1:/dev/dri/card2
WLR_DRM_DEVICES=/dev/dri/card2:/dev/dri/card1

The commit is fixing this problem. Now all screens are "normal".
2018-08-03 07:43:22 +02:00
Mariusz Bialonczyk 15dacebc36 multi-backend: do not expose internal renderers
backend_get_renderer() is now returning the renderer of the primary GPU, instead
of its own renderer, since that's the thing which actually does all of the "real"
rendering

wlr_multi_backend_add() is now adding all subbackends (otherwise only one GPU
is handled).

credits: @ascent12
2018-08-03 07:43:22 +02:00
emersion 364afced3e backend/drm: remove unnecessary casts 2018-08-02 23:33:59 +01:00
emersion 2ebecb6727 backend/drm: allow to pass empty gamma ramp to reset it 2018-08-02 23:33:59 +01:00
emersion a149c2370a Implement wlr-gamma-control-unstable-v1 2018-08-02 23:33:04 +01:00
Drew DeVault 4b096fc114 Revert "Merge pull request #1153 from emersion/include-config"
This reverts commit ef0a6ea4d2, reversing
changes made to 8d03bc9178.
2018-07-21 09:44:20 -04:00
emersion 41094a7df5 Always include config.h 2018-07-21 13:08:23 +01:00
Markus Ongyerth 36955204cf Remove last remnant of tool_tool in libinput 2018-07-14 09:49:58 +02:00
Markus Ongyerth d9e978e1b3 rename wlr_tablet_tool to wlr_tablet
The previous naming was based on the input-device capability names from
libinput.
With code that uses the libinput_tablet_tool and mapping into tablet-v2,
this is confusing, so the name is changed to follow the names used in
the protocol.
2018-07-14 09:49:58 +02:00
Markus Ongyerth 48e2cba9b6 Handle relative motion for mouse tools 2018-07-14 09:48:57 +02:00