Use ini highlighting

pages/Configuring/Advanced-config.md

@@ -6,7 +6,7 @@ Please remember, that for ALL arguments separated by a comma, if you want to
 leave one of them empty, you cannot reduce the number of commas, *unless told
 otherwise in a specific section*:
 
-```plain
+```ini
 three_param_keyword=A,B,C # OK
 
 three_param_keyword=A,C # NOT OK
@@ -82,25 +82,25 @@ script (`exec-once=~/myscript.sh` and do `myapp &` in the script)
 
 You can define your own custom variables like this:
 
-```
+```ini
 $VAR = value
 ```
 
 for example:
 
-```
+```ini
 $MyFavoriteGame = Among Us
 ```
 
 then, to use them, simply use them. For example:
 
-```
+```ini
 col.active_border=$MyColor
 ```
 
 You ARE allowed to do this:
 
-```
+```ini
 col.active_border=ff$MyRedValue1111
 ```
 
@@ -110,7 +110,7 @@ Use the `source` keyword to source another file.
 
 For example, in your `hyprland.conf` you can:
 
-```
+```ini
 source=~/.config/hypr/myColors.conf
 ```
 
@@ -134,7 +134,7 @@ overwritten.
 
 In order to apply per-device config options, make a new category like this:
 
-```
+```ini
 device:name {
 
 }
@@ -149,7 +149,7 @@ force_no_accel, follow_mouse, float_switch_override_focus
 
 For example:
 
-```
+```ini
 device:ROYUAN Akko Multi-modes Keyboard-B {
     repeat_rate=50
     repeat_delay=500
@@ -161,7 +161,7 @@ device:ROYUAN Akko Multi-modes Keyboard-B {
 
 {{< hint type=tip >}}
 With hyprctl, the category's spaces get turned into `-`, and everything is lowercase. So, for `hyprctl` calls, do for example:
-```
+```sh
 hyprctl keyword device:royuan-akko-multi-modes-keyboard-b:kb_layout us
 ```
 {{< /hint >}}
@@ -182,7 +182,7 @@ notification overlays, bars, etc.
 
 If you really want to blur them, use `blurls=`
 
-```
+```ini
 blurls=NAMESPACE
 ```
 
@@ -191,6 +191,6 @@ where `NAMESPACE` is the namespace of the layerSurface. (You can get it from
 
 to remove a namespace from being blurred (useful in dynamic situations) use:
 
-```
+```ini
 blurls=remove,NAMESPACE
 ```

pages/Configuring/Animations.md

@@ -5,7 +5,7 @@
 
 Animations are declared with the `animation` keyword.
 
-```
+```ini
 animation=NAME,ONOFF,SPEED,CURVE,STYLE
 or
 animation=NAME,ONOFF,SPEED,CURVE
@@ -13,7 +13,7 @@ animation=NAME,ONOFF,SPEED,CURVE
 
 for example:
 
-```
+```ini
 animation=workspaces,1,8,default
 animation=windows,1,10,myepiccurve,slide
 ```
@@ -53,7 +53,7 @@ global
 For animation style `popin` in `windows`, you can specify a minimum percentage
 to start from. For example:
 
-```
+```ini
 animation=windows,1,8,default,popin 80%
 ```
 
@@ -63,7 +63,7 @@ will make the animation 80% -> 100% of the size.
 
 Defining your own Bezier curve can be done with the `bezier` keyword:
 
-```
+```ini
 bezier=NAME,X0,Y0,X1,Y1
 ```
 
@@ -73,6 +73,6 @@ good website to design your bezier can be found
 
 Example curve:
 
-```
+```ini
 bezier=overshot,0.05,0.9,0.1,1.1
 ```

pages/Configuring/Basic-Config.md

@@ -22,7 +22,7 @@ the layout pages and not here. (See the Sidebar)
 {{< hint type=info >}}
 
 Mod list:
-```plain
+```ini
 SHIFT CAPS CTRL/CONTROL ALT MOD2 MOD3 SUPER/WIN/LOGO/MOD4 MOD5
 ```
 

pages/Configuring/Binds.md

@@ -4,13 +4,13 @@
 
 ## Basic
 
-```
+```ini
 bind=MODS,key,dispatcher,params
 ```
 
 for example,
 
-```
+```ini
 bind=SUPER_SHIFT,Q,exec,firefox
 ```
 
@@ -18,7 +18,7 @@ will bind opening firefox to <key>SUPER</key> + <key>SHIFT</key> + <key>Q</key>
 
 {{< hint type=tip >}}
 For binding keys without a modkey, leave it empty:
-```
+```ini
 bind=,Print,exec,grim
 ```
 {{< /hint >}}
@@ -38,7 +38,7 @@ use `xev` or `wev` to find that information.
 If you want to bind by a keycode, you can just input it in the KEY position,
 e.g.:
 
-```
+```ini
 bind=SUPER,28,exec,amongus
 ```
 
@@ -49,7 +49,7 @@ can also use `xev` or `wev` to find keycodes.
 
 You can also unbind with `unbind`, e.g.:
 
-```
+```ini
 unbind=SUPER,O
 ```
 
@@ -58,7 +58,7 @@ May be useful for dynamic keybindings with `hyprctl`.
 You can also bind mouse buttons, by prefacing the mouse keycode with `mouse:`,
 for example:
 
-```
+```ini
 bind=SUPER,mouse:272,exec,amongus
 ```
 
@@ -67,12 +67,12 @@ will bind it to <key>SUPER</key> + <key>LMB</key>.
 For binding only modkeys, you need to use the TARGET modmask (with the
 activating mod) and the `r` flag, e.g.:
 
-```
+```ini
 bindr=SUPERALT,Alt_L,exec,amongus
 ```
 
 You can also bind the mouse wheel with `mouse_up` and `mouse_down`:
-```
+```ini
 bind=SUPER,mouse_down,workspace,e-1
 ```
 (control the reset time with `binds:scroll_event_delay`)
@@ -81,19 +81,19 @@ bind=SUPER,mouse_down,workspace,e-1
 
 bind supports flags in this format:
 
-```
+```ini
 bind[flags]=...
 ```
 
 e.g.:
 
-```
+```ini
 bindrl=MOD,KEY,exec,amongus
 ```
 
 flags:
 
-```
+```ini
 l -> locked, aka. works also when an input inhibitor is active
 r -> release, will trigger on release of a key
 e -> repeat, will repeat when held.
@@ -113,7 +113,7 @@ with your mouse.
 
 *Available mouse binds*:
 
-| name | description |
+| Name | Description |
 | -----|------------ |
 | movewindow | moves the active window |
 | resizewindow | resizes the active window |
@@ -135,7 +135,7 @@ whatever keys / mods you please. When held, the mouse function will be activated
 
 You can bind a mod alone like this:
 
-```
+```ini
 bindr=ALT,Alt_L,exec,amongus
 ```
 
@@ -151,7 +151,7 @@ I've set the "Start/Stop Recording" keybind in OBS to <key>SUPER</key> +
 <key>F10</key>, and I want it to be global.
 
 Simple, add
-```plain
+```ini
 bind = SUPER,F10,pass,^(com\.obsproject\.Studio)$
 ```
 to your config and you're done.
@@ -159,7 +159,7 @@ to your config and you're done.
 `pass` will pass the PRESS and RELEASE events by itself, no need for a `bindr`.
 This also means that push-to-talk will work flawlessly with one pass, e.g.:
 
-```
+```ini
 bind=,mouse:276,pass,^(TeamSpeak 3)$
 ```
 
@@ -182,7 +182,7 @@ If you want keybind submaps, for example if you press <key>ALT</key> +
 <key>R</key>, you can enter a "resize" mode, resize with arrow keys, and leave
 with escape, do it like this:
 
-```
+```ini
 bind=ALT,R,submap,resize # will switch to a submap called resize
 
 submap=resize # will start a submap called "resize"

pages/Configuring/Configuring-Hyprland.md

@@ -21,7 +21,7 @@ toggleable / numerical options.
 
 every config line is a command followed by a value.
 
-```plain
+```ini
 COMMAND=VALUE
 ```
 
@@ -32,7 +32,7 @@ You are **allowed to** input trailing spaces at the beginning and end.
 
 e.g.:
 
-```plain
+```ini
 COMMAND = VALUE
 ```
 

pages/Configuring/Master-Layout.md

@@ -38,7 +38,7 @@ You can, however, resize the master window.
 {{< hint type=info >}}
 example usage:
 
-```
+```ini
 bind=MOD,KEY,layoutmsg,cyclenext
 ```
 {{< /hint >}}

pages/Configuring/Monitors.md

@@ -5,13 +5,13 @@
 ## General
 
 The general config of a monitor looks like this
-```plain
+```ini
 monitor=name,resolution,offset,scale
 ```
 
 A common example:
 
-```plain
+```ini
 monitor=DP-1,1920x1080@144,0x0,1
 ```
 
@@ -37,7 +37,7 @@ You can use `preferred` as a resolution to use the display's preferred size, and
 
 Recommended rule for quickly plugging in random monitors:
 
-```plain
+```ini
 monitor=,preferred,auto,1
 ```
 
@@ -49,13 +49,13 @@ resolution or refreshrate mix.
 
 for a focus on refreshrate use this:
 
-```plain
+```ini
 monitor=,highrr,auto,1
 ```
 
 for a focus on resolution this:
 
-```plain
+```ini
 monitor=,highres,auto,1
 ```
 
@@ -63,7 +63,7 @@ monitor=,highres,auto,1
 
 To disable a monitor, use
 
-```plain
+```ini
 monitor=name,disable
 ```
 
@@ -71,7 +71,7 @@ monitor=name,disable
 
 If your workflow requires custom reserved area, you can add it with
 
-```plain
+```ini
 monitor=name,addreserved,TOP,BOTTOM,LEFT,RIGHT
 ```
 
@@ -83,7 +83,8 @@ only use one of these rules per monitor in the config.
 
 If you want to mirror a display, add a `,mirror,[NAME]` at the end of the monitor
 rule, examples:
-```
+
+```ini
 monitor=DP-3,1920x1080@60,0x0,1,mirror,DP-2
 monitor=,preferred,auto,1,mirror,DP-1
 ```
@@ -102,13 +103,13 @@ specifically for the targeted monitor, and ***MUST*** be after it.
 
 {{< /hint >}}
 
-```plain
+```ini
 workspace=name,number
 ```
 
 for example:
 
-```plain
+```ini
 workspace=DP-1,1
 ```
 
@@ -116,15 +117,14 @@ will tell Hyprland to make the default workspace on DP-1 a number 1.
 
 If you want to rotate a monitor, use
 
-```plain
+```ini
 monitor=NAME,transform,TRANSFORM
 ```
 
 where `NAME` is the name, and `TRANSFORM` is an integer, from 0 to 7,
 corresponding to your transform of choice.
 
-
+```ini
-```
 WL_OUTPUT_TRANSFORM_NORMAL = 0
 WL_OUTPUT_TRANSFORM_90 = 1
 WL_OUTPUT_TRANSFORM_180 = 2
@@ -139,12 +139,12 @@ WL_OUTPUT_TRANSFORM_FLIPPED_270 = 7
 
 A workspace can be bound to a monitor, meaning by default it will ALWAYS open
 on the selected monitor. You can do this with
-```
+```ini
 wsbind=WORKSPACE,MONITOR
 ```
 
 for example:
-```
+```ini
 wsbind=5,DP-1
 wsbind=name:secret,DP-2
 ```

pages/Configuring/Uncommon-tips-&-tricks.md

@@ -3,7 +3,7 @@
 An example of a switchable keyboard layout between US and RU, where you switch
 between them with SUPER+A (SUPER+Ф)
 
-```
+```ini
 bind=SUPER,A,exec,hyprctl keyword input:kb_layout ru
 bind=SUPER,Cyrillic_ef,exec,hyprctl keyword input:kb_layout us
 ```
@@ -41,7 +41,7 @@ See [per-device input configs](https://wiki.hyprland.org/Configuring/Advanced-co
 If you want to disable all keybinds with another keybind (make a kaybind toggle
 of sorts) you can just use a submap with only a keybind to exit it.
 
-```
+```ini
 bind=MOD,KEY,submap,clean
 submap=clean
 bind=MOD,KEY,submap,reset

pages/Configuring/Window-Rules.md

@@ -5,7 +5,7 @@
 
 You can set window rules for various actions. These are applied on window open!
 
-```
+```ini
 windowrule=RULE,WINDOW
 ```
 
@@ -20,7 +20,7 @@ you can get both by inspecting `hyprctl clients`
 
 Examples:
 
-```
+```ini
 windowrule=float,^(kitty)$
 windowrule=move 0 0,title:^(Firefox)(.*)$
 ```
@@ -33,12 +33,12 @@ rule system, window rules v2 were implemented.
 In V2, you are allowed to match multiple variables.
 
 the `RULE` field is unchanged, but in the `WINDOW` field, you can put regexes for multiple values like so:
-```
+```ini
 windowrulev2 = float,class:^(kitty)$,title:^(kitty)$
 ```
 
 For now, the supported fields are:
-```
+```ini
 class - class regex
 title - title regex
 xwayland - 0/1
@@ -70,7 +70,7 @@ Keep in mind you do *not* need to define all of them, but you need to define at
 | pin | pins the window *note: floating only* |
 
 *Examples*:
-```
+```ini
 windowrule = move 100 100,^(kitty)$
 windowrule = animation popin,^(kitty)$
 windowrule = noblur,^(firefox)$

pages/Configuring/XWayland.md

@@ -27,7 +27,7 @@ and [this commit](https://gitlab.freedesktop.org/wlroots/wlroots/-/commit/185950
 programs crash Hyprland.
 
 3. Add this line to your configuration:
-    ```toml
+    ```ini
     exec-once=xprop -root -f _XWAYLAND_GLOBAL_OUTPUT_SCALE 32c -set _XWAYLAND_GLOBAL_OUTPUT_SCALE 2
     ```
     and configure toolkits to scale using their specific mechanisms, such as

pages/FAQ/_index.md

@@ -165,7 +165,7 @@ workspace subsequently).
 
 Put the following in your `hyprland.conf`: (example)
 
-```plain
+```ini
 windowrule=workspace 1 silent,kitty
 windowrule=workspace 1 silent,Subl
 windowrule=workspace 3 silent,Mailspring
@@ -198,7 +198,7 @@ following:
 
 In hyprland.conf:
 
-```plain
+```ini
 exec-once=handle_monitor_connect.sh
 ```
 
@@ -233,11 +233,11 @@ Until then, OTD.
 
 *~/.config/hypr/hyprland.conf*
 
-```plain
+```ini
 exec-once=dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
 ```
 and
-```plain
+```ini
 exec-once=systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
 ```
 
@@ -251,7 +251,7 @@ should probably add it to your exported envvars.
 As with any Display Server, Xorg included, you should probably make a script to
 launch it, for example:
 
-```plain
+```ini
 export AMONG_US=1
 exec Hyprland
 ```