mirror of
https://github.com/hyprwm/hyprland-wiki.git
synced 2024-11-09 15:05:58 +01:00
95 lines
5.4 KiB
Markdown
95 lines
5.4 KiB
Markdown
# Foreword
|
|
|
|
There is no _official_ Hyprland support for Nvidia hardware. However, you might make it work properly following this page.
|
|
|
|
You can choose between the proprietary [Nvidia drivers](https://wiki.archlinux.org/title/NVIDIA) or the open source [Nouveau driver](https://wiki.archlinux.org/title/Nouveau). Under the proprietary Nvidia drivers category, there are 3 of them: the current driver named 'nvidia' (or 'nvidia-dkms' to use with custom linux kernels) which is under active development, the legacy drivers 'nvidia-3xxxx' for older cards which Nvidia no longer actively supports, and the 'nvidia-open' driver which is currently an alpha stage attempt to open source a part of their close source driver for newer cards.
|
|
|
|
You may want to use the proprietary Nvidia drivers in some cases, for example: if you have a new Nvidia GPU model, if you want more performance, if you want to play video games, if you need a wider feature set (for example, better power consumption on recent GPUs), etc. However, keep in mind that if the proprietary Nvidia drivers do not work properly on your computer, the Nouveau driver might work fine while not having as much features or performance. For [older cards](https://wiki.archlinux.org/title/NVIDIA#Unsupported_drivers), in order to use Hyprland, you will probably need to use the Nouveau driver which actively supports them.
|
|
|
|
Below are some tips to try to make the proprietary Nvidia driver work with Hyprland properly:
|
|
|
|
## How to get Hyprland to possibly work on Nvidia
|
|
|
|
Install the `nvidia-dkms` driver and add it to your initramfs & kernel parameters.
|
|
For people using [systemd-boot](https://wiki.archlinux.org/title/systemd-boot) you can do this adding `nvidia_drm.modeset=1` to the end of `/boot/loader/entries/arch.conf`.
|
|
For people using [grub](https://wiki.archlinux.org/title/GRUB) you can do this by adding `nvidia_drm.modeset=1` to the end of `GRUB_CMDLINE_LINUX_DEFAULT=` in `/etc/default/grub`, then run `# grub-mkconfig -o /boot/grub/grub.cfg`
|
|
For others check out [kernel parameters](https://wiki.archlinux.org/title/Kernel_parameters) and how to add `nvidia_drm.modeset=1` to your specific bootloader.
|
|
|
|
in `/etc/mkinitcpio.conf` add `nvidia nvidia_modeset nvidia_uvm nvidia_drm` to your `MODULES`
|
|
|
|
run `# mkinitcpio --config /etc/mkinitcpio.conf --generate /boot/initramfs-custom.img` (make sure you have the `linux-headers` package installed first)
|
|
|
|
add a new line to `/etc/modprobe.d/nvidia.conf` (make it if it does not exist) and add the line `options nvidia-drm modeset=1`
|
|
|
|
More information is available here:
|
|
[https://wiki.archlinux.org/title/NVIDIA#DRM_kernel_mode_setting](https://wiki.archlinux.org/title/NVIDIA#DRM_kernel_mode_setting)
|
|
|
|
{{< hint >}}If your GPU is listed as supported by the `nvidia-open-dkms` driver,
|
|
use that one instead. Note that on a laptop, it could cause problems with the suspended state when closing the lid, so you might be better off with `nvidia-dkms`.
|
|
{{< /hint >}}
|
|
|
|
{{< hint >}}To get multi monitor to work properly on a hybrid graphics device (a laptop with both an Intel and an Nvidia GPU), you will need to remove the `optimus-manager` package if installed (disabling the service does not work). You also need to change your BIOS settings from hybrid graphics to discrete graphics.
|
|
{{< /hint >}}
|
|
|
|
Export these variables in your hyprland config:
|
|
|
|
```sh
|
|
env = LIBVA_DRIVER_NAME,nvidia
|
|
env = XDG_SESSION_TYPE,wayland
|
|
env = GBM_BACKEND,nvidia-drm
|
|
env = __GLX_VENDOR_LIBRARY_NAME,nvidia
|
|
env = WLR_NO_HARDWARE_CURSORS,1
|
|
```
|
|
|
|
{{< hint >}}If you encounter crashes in Firefox, remove the line `env = GBM_BACKEND,nvidia-drm`.
|
|
{{< /hint >}}
|
|
|
|
{{< hint >}}If you face problems with Discord windows not displaying or screen sharing not working in Zoom, remove or comment the line `env = __GLX_VENDOR_LIBRARY_NAME,nvidia`.
|
|
{{< /hint >}}
|
|
|
|
Install `qt5-wayland`, `qt5ct` and `libva`. Additionally
|
|
`libva-nvidia-driver-git` (AUR) to fix crashes in some Electron-based
|
|
applications, such as Unity Hub.
|
|
|
|
Reboot your computer
|
|
|
|
Launch Hyprland.
|
|
|
|
It _should_ work now.
|
|
|
|
## Fixing random flickering, (nuclear method)
|
|
|
|
Do note though that this forces performance mode to be active, resulting in
|
|
increased power-consumption (from 22W idle on a RTX 3070TI, to 74W).
|
|
|
|
This may not even be needed for some users, only apply these 'fixes' if you
|
|
in-fact do notice flickering artifacts from being idle for ~5 seconds.
|
|
|
|
Make a new file at `/etc/modprobe.d/nvidia.conf` and paste this in:
|
|
|
|
```sh
|
|
options nvidia NVreg_RegistryDwords="PowerMizerEnable=0x1; PerfLevelSrc=0x2222; PowerMizerLevel=0x3; PowerMizerDefault=0x3; PowerMizerDefaultAC=0x3"
|
|
```
|
|
|
|
Reboot your computer and it should be working.
|
|
|
|
## Fixing suspend/wakeup issues
|
|
|
|
Enable the services `nvidia-suspend.service`, `nvidia-hibernate.service` and `nvidia-resume.service`, they will be started by systemd when needed.
|
|
|
|
Add `nvidia.NVreg_PreserveVideoMemoryAllocations=1` to your kernel parameters if you don't have it already.
|
|
|
|
{{< hint type=important >}} Suspend functions are currently broken on `nvidia-open-dkms` [due to a bug](https://github.com/NVIDIA/open-gpu-kernel-modules/issues/472), so make sure you're on `nvidia-dkms`. {{< /hint >}}
|
|
|
|
For Nix users, the equivalent of the above is
|
|
```nix
|
|
# configuration.nix
|
|
|
|
boot.kernelParams = [ "nvidia.NVreg_PreserveVideoMemoryAllocations=1" ];
|
|
|
|
hardware.nvidia.powerManagement.enabled = true
|
|
|
|
# Making sure to use the proprietary drivers until the issue above is fixed upstream
|
|
hardware.nvidia.open = false
|
|
|
|
```
|