hyprland-wiki/pages/Configuring/Dispatchers.md

10 KiB
Raw Blame History

Table of contents

{{< toc >}}

Please keep in mind some layout-specific dispatchers will be listed in the layout pages (See the sidebar).

Parameter explanation

Param type Description
window a window. Any of the following: Class regex, title: and a title regex, pid: and the pid, address: and the address, floating, tiled
workspace see below.
direction l r u d left right up down
monitor One of: direction, ID, name, current, relative (e.g. +1 or -1)
resizeparams relative pixel delta vec2 (e.g. 10 -10), optionally a percentage of the window size (e.g. 20 25%) or exact followed by an exact vec2 (e.g. exact 1280 720), optionally a percentage of the screen size (e.g. exact 50% 50%)
floatvalue a relative float delta (e.g -0.2 or +0.2) or exact followed by a the exact float value (e.g. exact 0.5)
workspaceopt see below.
zheight top or bottom

List of Dispatchers

Dispatcher Description Params
exec executes a shell command command (supports rules, see [below]({{< relref "#executing-with-rules" >}}))
execr executes a raw shell command (will not append any additional envvars like exec does, does not support rules) command
pass passes the key (with mods) to a specified window. Can be used as a workaround to global keybinds not working on Wayland. window
killactive closes (not kills) the active window none
closewindow closes a specified window window
workspace changes the workspace workspace
movetoworkspace moves the focused window to a workspace workspace OR workspace,window for a specific window
movetoworkspacesilent same as above, but doesnt switch to the workspace workspace OR workspace,window for a specific window
togglefloating toggles the current window's floating state left empty / active for current, or window for a specific window
fullscreen toggles the focused window's fullscreen state 0 - fullscreen (takes your entire screen), 1 - maximize (keeps gaps and bar(s))
fakefullscreen toggles the focused window's internal fullscreen state without altering the geometry none
dpms sets all monitors' DPMS status. Do not use with a keybind directly. on, off, or toggle. For specific monitor add monitor name after a space
pin pins a window (i.e. show it on all workspaces) note: floating only left empty / active for current, or window for a specific window
movefocus moves the focus in a direction direction
movewindow moves the active window in a direction or to a monitor direction or mon: and a monitor
swapwindow swaps the active window with another window in the given direction direction
centerwindow center the active window note: floating only none (for monitor center) or 1 (to respect monitor reserved area)
resizeactive resizes the active window resizeparams
moveactive moves the active window resizeparams
resizewindowpixel resizes a selected window resizeparams,window, e.g. 100 100,^(kitty)$
movewindowpixel moves a selected window resizeparams,window
cyclenext focuses the next window on a workspace none (for next) or prev (for previous)
swapnext swaps the focused window with the next window on a workspace none (for next) or prev (for previous)
focuswindow focuses the first window matching window
focusmonitor focuses a monitor monitor
splitratio changes the split ratio floatvalue
toggleopaque toggles the current window to always be opaque. Will override the opaque window rules. none
movecursortocorner moves the cursor to the corner of the active window direction, 0 - 3, bottom left - 0, bottom right - 1, top right - 2, top left - 3
movecursor moves the cursor to a specified position x,y
workspaceopt toggles a workspace option for the active workspace. workspaceopt
renameworkspace rename a workspace id name, e.g. 2 work
exit exits the compositor with no questions asked. none
forcerendererreload forces the renderer to reload all resources and outputs none
movecurrentworkspacetomonitor Moves the active workspace to a monitor monitor
moveworkspacetomonitor Moves a workspace to a monitor workspace and a monitor separated by a space
swapactiveworkspaces Swaps the active workspaces between two monitors two monitors separated by a space
bringactivetotop Deprecated in favor of alterzorder. Brings the current window to the top of the stack none
alterzorder Modify the window stack order of the active or specified window. Note: this cannot be used to move a floating window behind a tiled one. zheight[,window]
togglespecialworkspace toggles a special workspace on/off none (for the first) or name for named (name has to be a special workspace's name)
focusurgentorlast Focuses the urgent window or the last window none
togglegroup toggles the current active window into a group none
changegroupactive switches to the next window in a group. b - back, f - forward, or index start at 1
focuscurrentorlast Switch focus from current to previously focused window none
lockgroups Locks the groups (all groups will not accept new windows) lock for locking, unlock for unlocking, toggle for toggle
lockactivegroup Lock the focused group (the current group will not accept new windows or be moved to other groups) lock for locking, unlock for unlocking, toggle for toggle
moveintogroup Moves the active window into a group in a specified direction. No-op if there is no group in the specified direction. direction
moveoutofgroup Moves the active window out of a group. No-op if not in a group none
movewindoworgroup Behaves as moveintogroup if there is a group in the given direction. Behaves as moveoutofgroup if there is no group in the given direction relative to the active group. Otherwise behaves like movewindow. direction
movegroupwindow Swaps the active window with the next or previous in a group b for back, anything else for forward
denywindowfromgroup Prohibit the active window from becoming or being inserted into group on, off or, toggle
setignoregrouplock Temporarily enable or disable binds:ignore_group_lock on, off, or toggle
global Executes a Global Shortcut using the GlobalShortcuts portal. See here name
submap Change the current mapping group. See Submaps reset or name

{{< hint type=warning >}} it is NOT recommended to set DPMS with a keybind directly, as it might cause undefined behavior. Instead, consider something like

bind = MOD,KEY,exec,sleep 1 && hyprctl dispatch dpms off

{{< /hint >}}

Grouped (tabbed) windows

Hyprland allows you to make a group from the current active window with the togglegroup bind dispatcher.

A group is like i3wms “tabbed” container. It takes the space of one window, and you can change the window to the next one in the tabbed “group” with the changegroupactive bind dispatcher.

The new groups border colors are configurable with the appropriate col. settings in the group config section.

You can lock a group with the lockactivegroup dispatcher in order to stop new window from entering this group. In addition, the lockgroups dispatcher can be used to toggle an independent global group lock that will prevent new window from entering any groups, regardless of their local group lock stat.

You can prevent a window from being added to group or becoming a group with the denywindowfromgroup dispatcher. movewindoworgroup will behave like movewindow if current active window or window in direction has this property set.

Workspaces

You have eight choices:

  • ID: e.g. 1, 2, or 3

  • Relative ID: e.g. +1, -3 or +100

  • Relative workspace on monitor: e.g. m+1, m-1 or m+3

  • Relative workspace on monitor including empty workspaces: e.g. r+1 or r-3

  • Relative open workspace: e.g. e+1 or e-10

  • Name: e.g. name:Web, name:Anime or name:Better anime

  • Previous workspace: previous

  • First available empty workspace: empty

  • Special Workspace: special or special:name for named special workspaces.

{{< hint type=warning >}} special is supported ONLY on movetoworkspace and movetoworkspacesilent. Any other dispatcher will result in undocumented behavior. {{< /hint >}}

{{< hint type=important >}} Numerical workspaces (e.g. 1, 2, 127634934729) are allowed ONLY between 1 and 9223372036854775806 (inclusive)

Neither 0 nor negative numbers are allowed. {{< /hint >}}

Special Workspace

A special workspace is what is called a "scratchpad" in some other places. A workspace that you can toggle on/off on any monitor.

{{< hint >}} You cannot have floating windows in a Special workspace. Making a window floating will send it to the currently active real workspace.

You can define multiple named special workspaces, but the amount of those is limited to 97 at a time. {{< /hint >}}

For example, to move a window/application to a special workspace you can use the following syntax:

bind = SUPER, C, movetoworkspace, special
#The above syntax will move the window to a special workspace upon pressing 'SUPER'+'C'.
#To see the hidden window you can use the togglespecialworkspace dispatcher mentioned above.

Workspace options

allfloat -> makes all new windows floating (also floats/unfloats windows on toggle)
allpseudo -> makes all new windows pseudo (also pseudos/unpseudos on toggle)

Executing with rules

The exec dispatcher supports adding rules. Please note some windows might work better, some worse. It records the PID of the spawned process and uses that. If your process e.g. forks and then the fork opens a window, this will not work.

The syntax is:

bind = mod, key, exec, [rules...] command

For example:

bind = SUPER, E, exec, [workspace 2 silent;float;noanim] kitty