Commit graph

815 commits

Author SHA1 Message Date
Simon Ser
6c649bab53 output: add wlr_output_event_present.commit_seq
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.

References: https://github.com/swaywm/wlroots/issues/1917
2019-11-17 00:12:59 +01:00
Simon Ser
cde544de81 backend/wayland: expose remote objects
Expose the remote wl_display, wl_surface and wl_seat used by the Wayland
backend.

This allows compositors to customize the Wayland backend and to have
more freedom. For instance a compositor might want to handle clipboard
and drag-and-drop from the remote Wayland compositor. Another compositor
might want to setup pointer constraints.
2019-11-13 10:15:28 -05:00
Simon Ser
1e568d84df backend/wayland: add support for relative-pointer-unstable-v1
We just send relative motion events alongside absolute motion events.
Compositors can figure out how absolute and relative events are related
(e.g. whether they have been triggered by the same logical event) with
the frame event.
2019-11-13 10:15:19 -05:00
Scott Anderson
626c98d754 session/logind: Clean up add_signal_matches
The original signal matching was using the old interface before
sd_bus_match_signal was added, which the new code uses.
Change them all to use it now.
2019-11-03 10:13:47 +01:00
Ronan Pigott
3ebf079a9a session/logind: support CanGraphical property 2019-11-03 00:17:23 +00:00
Scott Anderson
a3c3b928a3 backend/x11: Give X11 a real rendering loop
Makes use of the present extension to get notified of vsync, and not
require any stupid timer hacks. Also make use of the present version of
ConfigureNotify, because why not?
2019-11-02 12:43:33 +01:00
Simon Ser
0e57effd38 backend/drm: add support for custom modes
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-27 10:46:47 -04:00
Simon Ser
e97c2c3639 backend/drm: retry without modifiers for the primary plane
On some Intel cards using modifiers can fill the FIFO and prevent
hotplugged outputs from being properly enabled.

Add a fallback without modifiers.

Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
References: https://github.com/swaywm/wlroots/issues/1840
Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-23 09:36:50 +00:00
Simon Ser
fd25e2ca11 backend/drm: track gbm_bo during direct scan-out
We need to destroy the gbm_bo we imported and drmModeRmFb.

Closes: https://github.com/swaywm/sway/issues/4662
2019-10-22 21:50:31 +00:00
Simon Ser
5bddb5a909 backend/wayland: add support for direct scan-out
Closes: https://github.com/swaywm/wlroots/issues/1830
2019-10-16 09:40:26 -04:00
Simon Ser
2bdd1d0896 backend/drm: use modifiers for our GBM buffers 2019-10-11 08:11:48 -04:00
Ivan Molodetskikh
5f78ea20fa drm: use IMPORT_FD for INVALID modifier
GBM_BO_IMPORT_FD_MODIFIER doesn't accept the INVALID modifier.
2019-09-26 23:26:40 +03:00
Markus Ongyerth
ebeef0fbe8 Clean up wayland backend tablet support
Mostly address feedback from emersion on PR #1694
Remove const qualifier from char *name, to allow free() call
2019-09-26 19:41:19 +03:00
Markus Ongyerth
2285e36b0c Add zwp-tablet-unstable-v2 client support
This allows wlroots based compositors to properly use graphic tablets
with the wayland backend.
This should be a decent quality of life improvement when working on
tablet related features.
2019-09-26 19:41:19 +03:00
Markus Ongyerth
57babd2e13 Move initialization of wlr_tablet_pad into types/wlr_tablet_pad 2019-09-26 19:41:19 +03:00
Rouven Czerwinski
bf90474b74 backend/drm: check for mst: in path property
Instead of checking that the path property is not 0 to determine if the
connector is an MST connector, check if the path contains the mst:
string.

Fixes #1813
2019-09-05 10:25:12 +03:00
Andri Yngvason
e19f48d1e4 backend: touch: Fixup incomplete patch for single touch devices.
All instances of libinput_event_touch_get_slot need to be converted to
libinput_event_touch_get_seat_slot for things to work.
2019-08-19 17:35:30 +03:00
Andri Yngvason
4f4d3cf2a2 backend: touch: Assign good ids to single touch devices
libinput_event_touch_get_slot always returns -1 for single touch devices. Using
libinput_event_touch_get_seat_slot instead ensures that they are assigned actual
slot ids.

Also, this is what Weston does, so this change yields a more consistent
behaviour between different compositors.
2019-08-15 18:46:54 +03:00
Simon Ser
8d2ea9544b backend/drm: fix missing plane formats
The loop populating the format list was exiting early if ARGB8888 was found.
2019-08-15 12:33:42 +12:00
Antonin Décimo
e7f1aa30dd backend/wayland: check if zxdg_toplevel_decoration_v1 is not NULL 2019-08-12 09:37:21 +09:00
Antonin Décimo
39c5d93dea backend/drm: use UINT64_C for uint64_t literals
Prevents an integer promotion bug during the byte-shift.
2019-08-12 09:37:21 +09:00
Antonin Décimo
68b4a5305e backend/session: non-void function should return a value
With assertions disabled, it should make sense to return NULL.
2019-08-12 09:37:21 +09:00
Drew DeVault
94f65e354d Add libinput-1.14 support
This libinput version adds a new tablet tool type.
2019-08-11 19:39:47 +09:00
Rouven Czerwinski
01f903874b Revert "output: atomic mode"
This reverts commit ee5f98ad49.

This intoduced problems where outputs could not be turned off because
they had flips pending.
2019-08-07 16:22:11 +09:00
Rouven Czerwinski
4d36cc86eb backend/drm: destroy output immediately
Instead of waiting for the next pageflip, destroy the output immediately
since we can now handle flips for outputs which no longer exist.
Also demote the missing crtc on flip to debug.

Fixes #1739
2019-08-03 15:44:21 +02:00
Simon Ser
ee5f98ad49 output: atomic mode, enabled, scale and transform
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.

Compositors now need to call wlr_output_commit after setting any of those
properties.

Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.

Updates: https://github.com/swaywm/wlroots/issues/1640
2019-08-02 10:01:29 -04:00
Simon Ser
ca45f4490c Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
2019-07-27 15:49:32 -04:00
Sebastian Krzyszkowiak
415267ac13 backends/x11: Touch support
Closes #1749
2019-07-17 09:23:10 -04:00
Rouven Czerwinski
d10072e76c backend: drm: switch to pageflip_handler_2
atomic and legacy now both pass the backend as the user data for the
pageflip event. We than retrieve the correct connector by matching on
the crtc_id passed to the page_flip_handler2.

Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now.

Fixes #1297
2019-06-27 00:17:27 +00:00
Scott Anderson
46dc4100d6 backend/drm: Exit-early if 0 crtcs
This fixes an assertion failure if we're using a device that has 0 crtcs
as a renderer.
This would happen on some laptops with discrete GPUs.
2019-06-24 09:09:36 +03:00
Scott Anderson
b3f42548d0 backend/drm: Simplify object matching code
We originally used match_obj on planes, but this was largely
unnecessary. Instead, this assigns planes statically at startup.
2019-06-22 11:58:33 +03:00
Greg V
d80acadfd8 Support pointer-gestures on Wayland backend 2019-06-21 14:43:28 -04:00
Dorota Czaplejewicz
5027b23dc2 x11: Send a frame event on the pointer after button events
Without the immediate frame event, the button event would not be processed in time: https://source.puri.sm/Librem5/phoc/issues/
2019-06-17 16:01:29 +03:00
Simon Ser
ce3f4c3fe1 output: remove wlr_output_impl.transform
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.

We could add support for hardware transforms, but:

- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
  limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])

This belongs to a different patch series anyway.

[1]: https://patchwork.freedesktop.org/series/52324/
2019-06-16 10:51:49 -04:00
Scott Anderson
b85f0cbff9 Remove WLR_DRM_NO_ATOMIC_GAMMA workaround
This is fixed on amdgpu, so we don't need this anymore.
2019-06-11 08:52:34 +03:00
Simon Ser
d201fc3506 backend/drm: add support for multiplanar BOs 2019-06-07 09:06:11 -04:00
Simon Ser
e8057bb60c backend/drm: fallback to drmModeAddFB2 2019-06-07 09:06:11 -04:00
Simon Ser
d1766547bd backend/drm: reject DMA-BUFs with flags 2019-06-07 09:06:11 -04:00
Simon Ser
44ba603c0e backend/drm: hold buffers while scanning out 2019-06-07 09:06:11 -04:00
Simon Ser
afe7b207d5 output: fix attach_buffer semantics 2019-06-07 09:06:11 -04:00
Simon Ser
1d222309b8 output: change set_dmabuf to attach_buffer 2019-06-07 09:06:11 -04:00
Simon Ser
5c78f1b0d5 backend/drm: strip alpha channel on scan-out 2019-06-07 09:06:11 -04:00
Simon Ser
e516ea4c79 backend/drm: check format when scanning out DMA-BUF 2019-06-07 09:06:11 -04:00
emersion
96d6fde5dc backend/drm: add basic support for direct scan-out 2019-06-07 09:06:11 -04:00
Rouven Czerwinski
96e9c0f9c8 drm: legacy: issue a NULL modeset on disable
The DRM subsystem needs a NULL modeset for connectors which disappear
from the system to disable the hardware pipes, otherwise the pixels get
rendered but are sent nowhere.

The atomic backend does the equivalent by removing the properties and
issuing a commit.

Fixes #1706
2019-06-02 09:50:40 +02:00
Jan Chren
151b7d1d94 session/logind: check for XDG_SESSION_ID first
In order to support compositors running as systemd user units without display manager,
a mechanism for specifying session ID exactly must exist.

Checking for `XDG_SESSION_ID` mimics loginctl behaviour e95be7def2/src/login/loginctl.c (L856).
2019-05-22 15:43:07 +02:00
Jan Chren
e04e1ba197
session/logind: specify seat exactly
"/org/freedesktop/login1/seat/self" path triggers seat-finding code path in logind,
which currently relies on getting the session based on caller's PID.
This behaviour is deprecated in logind as it doesn't work eg. with systemd user units,
which run outside of user session.

We check for "seat0" in logind_change_vt() already as introduced in 47985d2dc5,
so hard-coding it here is not a problem, otherwise sd_session_get_seat() could be used.
2019-05-22 14:43:13 +02:00
Scott Anderson
522ddd93f1
Merge pull request #1696 from RedSoxFan/logind-stay-active-on-gone
session/logind: keep active for pause_device gone
2019-05-15 04:34:08 +00:00
Michiel
a68c7c0c8d Fixes #1689 RDP RemoteFX crash
When using the rdp backend and connecting with xfreerdp ... --rfx, wlroots
crashes in backend/rdp/output.c while attempting to realloc(..., 0).

This commit guards against that and instead returns true, resulting in
no rfx message being sent. This prevents the crash and appears to work, but
it's not obvious if this is correct from a specification perspective.
2019-05-13 23:30:38 +03:00
Brian Ashworth
90c284bded session/logind: keep active for pause_device gone
This appears to be a quick fix for compositors freezing when a dock is
disconnected. Disconnection of the dock is causing `pause_device` for
the DRM devices associated with the dock. Since these devices major
number is `DRM_MAJOR`, the session was being set to inactive. This just
makes it so the session is not set to inactive when the device's state
is `gone`.
2019-05-13 10:43:35 -04:00