Commit graph

892 commits

Author SHA1 Message Date
Simon Ser
9412d34e2d backend/drm: disable cursor in dealloc_crtc
dealloc_crtc was destroying GBM surfaces, but the cursor_enabled flag
was left as-is. When re-enabling the output, atomic_crtc_pageflip would
try enabling the cursor plane, but would fail because no framebuffer is
available.

Closes: https://github.com/swaywm/wlroots/issues/2150
2020-05-12 15:12:22 +02:00
Simon Ser
da4df82532 backend/drm: fix combined modeset+enable commits
When an output is enabled and modeset at the same time,
drm_connector_commit would first try to modeset then try to commit. This
won't work because both will trigger a page-flip. KMS will reject that.

Change the logic to only enable an output if no modeset has been
requested. The logic in wlr_output already checks that the user isn't
doing a modeset and disabling the output at the same time.
2020-05-12 15:12:06 +02:00
Simon Ser
cdb6fdbc6c backend/drm: remove missing cursor plane workaround
We have a workaround for legacy drivers that support drmModeSetCursor
without exposing a cursor plane. It doesn't work anymore now that we've
moved to a more atomic interface.

Let's just remove this workaround and fallback to software cursors.

Closes: https://github.com/swaywm/wlroots/issues/2166
2020-05-12 08:57:13 +02:00
JonnyMako
1139234117
backend/drm: fix missing cursor on external monitors with multi-GPU setup and nouveau
We need to make the multi-GPU surface current before the glFinish call.

Closes: https://github.com/swaywm/sway/issues/5319
2020-05-11 08:51:41 +02:00
Simon Ser
f72686c0b6 backend/drm: fix crash in session_signal
conn->crtc is NULL in case the output is disabled.

However, the DRM backend will set the GAMMA_LUT property anyway. On each
commit the whole state is sent to KMS. Adding WLR_DRM_CRTC_GAMMA_LUT to
the pending state would just make the backend re-create the blob
containing the gamma LUT.
2020-05-10 12:07:05 +02:00
Simon Ser
2ca3bdc35e backend/drm: simplify atomic commit logic
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.

This is also groundwork for supporting wlr_output_test properly.
2020-05-10 09:21:04 +02:00
Simon Ser
06d5aa5780 backend/drm: GAMMA_LUT_SIZE isn't atomic
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.

It's no guaranteed to exist though, so we still need to keep the
fallback.
2020-05-10 09:20:46 +02:00
Simon Ser
da63d11d34 backend/drm: remove crtc_set_cursor from interface 2020-05-09 16:42:25 +02:00
Simon Ser
f8e02db4bc backend/drm: remove conn_enable from interface
Use crtc_commit instead.
2020-05-09 16:42:25 +02:00
Simon Ser
c608fc89d8 backend/drm: rename crtc_pageflip to crtc_commit
Also add a flags argument.

The commit function will also be used for disabling the CRTC.
2020-05-09 16:42:25 +02:00
Simon Ser
70883fd10b backend/drm: apply gamma LUT on page-flip 2020-05-09 16:42:25 +02:00
Simon Ser
69b2279092 backend/drm: remove mode argument to crtc_pageflip
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending
output changes. More fields will be added in the future (e.g. active,
gamma).
2020-05-09 16:42:25 +02:00
Simon Ser
c9d6b18eef backend/drm: remove wlr_drm_interface.crtc_move_cursor
Instead, make the legacy backend call drmModeMoveCursor on page-flip.
2020-05-09 16:42:25 +02:00
Tudor Brindus
6357e166f9 backend/wayland: emit tablet tool axis events to the axis handler 2020-05-04 21:53:52 +02:00
Simon Ser
46c83cbf3d backend/headless: handle renderer destroy
When the headless backend uses an already-existing renderer, it doesn't
have ownership over the renderer. When the renderer is destroyed, the
headless backend needs to destroy itself.
2020-05-02 19:36:03 +02:00
Simon Ser
7720ce7827 backend/multi: handle backends depending on each other properly
wl_list_for_each_safe only allows the current list item to be removed.
If a backend destroys itself when another backend is destroyed, this
blows up.
2020-05-02 19:36:03 +02:00
Simon Ser
90ede7f838 backend/drm: make page-flip error scarier
The logs don't currently display the importance of a line. It's easy to
read "skipping page-flip" as a debug message instead of an error
message.

Change the error message to make it more explicit.

References: https://github.com/swaywm/wlroots/pull/2147
2020-05-01 16:48:42 +02:00
Will Daly
044a9f28d6 Fix error when reconnecting external display
Reconnecting an external display fails on initial
page-flip.  This occurs when the pageflip_pending flag
has been set on the connector at the time the monitor
is removed.  Once the connector's CRTC has been deallocated,
page_flip_handler cannot find the connector by its crtc_id,
so pageflip_pending will remain set.  This causes
initialization to fail when the monitor is reconnected
with the error messages:

    Skipping pageflip on output 'X'
    Failed to initialize renderer on connector 'X': initial page-flip failed

To fix this problem, clear the pageflip_pending flag
when cleaning up the connector.
2020-05-01 16:01:30 +02:00
Scott Anderson
906c0766df Remove libcap support
This is simply a false sense of security, and is worse than just using
setuid. CAP_SYS_ADMIN is an extremely serious capability that is
effectively as powerful as root.

It also required users to be in the input group, which allows any
process to keylog the entire system.
2020-04-29 10:39:09 +02:00
Simon Ser
98d949718c backend/drm: strip alpha channel if necessary
Some primary planes don't support ARGB8888, they only support XRGB8888
(for instance on older Intel hardware). The DRM backend would fail to
initialize.

When that's the case, try to allocate buffers without an alpha channel.
2020-04-29 08:32:06 +02:00
Scott Anderson
321537ee92 backend/drm: don't allow legacy to use direct scanout 2020-04-28 09:54:52 +02:00
Scott Anderson
52281cb8ba backend/drm: move atomic cursor code into pageflip code
It makes sense to construct as much atomic state as possible in the same
place, so it doesn't get lost if we "reset" it.
2020-04-28 09:54:52 +02:00
Scott Anderson
be90062c51 backend/drm: don't have fallback atomic commits
This is just doing atomic incorrectly.
2020-04-28 09:54:52 +02:00
Scott Anderson
8da9d9679e backend/drm: introduce wlr_drm_fb
This is a type which manages gbm_surfaces and imported dmabufs in the
same place, and makes the lifetime management between the two shared. It
should lead to easier to understand code, and fewer special cases.

This also contains a fair bit of refactoring to start using this new
type.

Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-28 09:54:52 +02:00
Tudor Brindus
39af3535c3 input/tablet: populate tool tip event position
This commit doesn't fix any issue that I'm aware of, since sway
incidentally does not use these fields. Still, they exist, so they
should probably be filled in to prevent fun surprises in the future.
2020-04-27 10:20:44 +02:00
Simon Ser
6129a6f93e backend/headless: add wlr_headless_backend_create_with_renderer
This allows one to create a headless backend with an existing renderer.
2020-04-22 22:40:54 +02:00
Simon Ser
40513f1a0e backend/headless: use FBOs instead of pbuffers 2020-04-22 22:40:54 +02:00
Simon Ser
ab4f642153 build: use dicts instead of get_variable
Closes: https://github.com/swaywm/wlroots/issues/1963
2020-04-21 15:26:45 +02:00
Tudor Brindus
f0d818f36e backend/libinput: correctly populate x/y fields on tablet proximity in
Otherwise, the cursor will briefly jump to (0, 0). This is particularly
noticeable in the referenced issue (the game osu!).

Refs swaywm/sway#3633
2020-04-21 09:22:26 +02:00
Kenny Levinsen
904c37845d logind: Close fd before releasing device
This speeds up shutdown significantly, and is in line with how Weston
does it.
2020-04-15 21:36:19 +02:00
Simon Ser
ab4dc1636c backend/multi: add backends at end of list
This allows wlr_multi_for_each_backend to iterate on the backends in the
order where they have been added.
2020-04-14 16:05:58 +02:00
Simon Ser
83c1ba7783 backend/wayland: check scan-out buffer is compatible in output_test
If the buffer doesn't have a supported format/modifier, make the test
fail.
2020-04-10 15:52:20 +02:00
Simon Ser
50ade3671f output: check for buffer size compatibility in common code
Instead of checking for buffer size compatibility in each backend,
centralize the check in wlr_output itself.
2020-04-10 15:52:20 +02:00
Simon Ser
5f092c55d1 output: fix blurred hw cursors with fractional scaling
The scaling factor was being implicitly cast to an int.

Closes: https://github.com/swaywm/sway/issues/4927
2020-04-10 15:10:12 +02:00
Simon Ser
9acca4fc73 backend: set EGL_RENDERABLE_TYPE and EGL_SURFACE_TYPE
Ensure these are set to the correct value.
2020-04-09 00:15:25 +00:00
Simon Ser
507d9bc19e Add wlr_output_impl.rollback
Most of the pending output state is not forwarded to the backend prior
to an output commit. For instance, wlr_output_set_mode just stashes the
mode without calling any wlr_output_impl function.
wlr_output_impl.commit is responsible for applying the pending mode.

However, there are exceptions to this rule. The first one is
wlr_output_attach_render. It won't go away before renderer v6 is
complete, because it needs to set the current EGL surface.

The second one is wlr_output_attach_buffer.
wlr_output_impl.attach_buffer is removed in [1].

When wlr_output_rollback is called, all pending state is supposed to be
cleared. This works for all the state except the two exceptions
mentionned above. To fix this, introduce wlr_output_impl.rollback.

Right now, the backend resets the current EGL surface. This prevents GL
commands from affecting the output after wlr_output_rollback.

This patch is required for FBO-based outputs to work properly. The
compositor might be using FBOs for its own purposes [2], having leftover
FBO state can have bad consequences.

[1]: https://github.com/swaywm/wlroots/pull/2097
[2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08 17:33:00 +02:00
Simon Ser
d3bd5f2a7b backend: reset EGL surface after buffer swap
This prevents GL commands to affect a previously current EGL surface
after a buffer swap.
2020-04-08 17:33:00 +02:00
Simon Ser
6977f3a843 output: check buffer in wlr_output_test
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.

This brings the wlr_output API more in line with the KMS API.

This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
2020-04-08 16:31:21 +02:00
Simon Ser
e041158988 output: introduce wlr_output_test 2020-04-08 16:31:21 +02:00
Simon Ser
6595db6409 buffer: add a release event
Consumers call wlr_buffer_lock. Once all consumers are done with the
buffer, only the producer should have a reference to the buffer. In this
case, we can release the buffer (and let the producer re-use it).
2020-04-02 15:03:43 +02:00
Scott Moreau
30308e35fa build: Add 'auto' to logind-provider combo option
The logind provider defaulted to systemd and in order to use elogind,
-Dlogin-provider=elogind was required. This adds 'auto' as a choice
for the login-provider option and sets it as default. Using 'auto',
the build will check for systemd first and if it's not found, try
to find and use elogind automatically.
2020-03-24 14:11:39 +01:00
Simon Ser
b614ded3fc backend/wayland: close keymap FD
We don't actually need the keymap. We need to close the FD or we will
run out of FDs.
2020-03-17 13:37:53 +01:00
Filip Sandborg
5ee52a3ab9
Fix uint32 overflow in fill_empty_gamma_table on Icelake platform
Closes: https://github.com/swaywm/sway/issues/4826
2020-03-15 18:41:12 +01:00
Simon Ser
52c67284e2 backend/drm: add support for adaptive_sync_enabled
The vrr_capable and VRR_ENABLED properties are used.
2020-03-06 21:32:58 +01:00
Simon Ser
9be1af3afb backend/x11: add support for adaptive_sync_enabled
This sets the _VARIABLE_REFRESH window property [1].

[1]: 0616b7ac90/src/vulkan/wsi/wsi_common_x11.c (L1374)
2020-03-06 21:32:58 +01:00
Simon Ser
a3c699eee5 backend/wayland: fix seat caps handling
Previously, each time a wl_seat.capabilities event was received the
Wayland backend created new input devices. It now only does so the first
time.

Input devices are now destroyed when the cap is removed.

Closes: https://github.com/swaywm/sway/issues/5055
2020-03-04 09:57:10 +01:00
Simon Ser
348f52b5fc output: remove wlr_output_impl.schedule_frame
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.

There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.

However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:

- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
  screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen

With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.

This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.

References: https://github.com/swaywm/wlroots/issues/1925
2020-03-04 03:22:19 +01:00
Simon Ser
613f9c6f8d backend/wayland: rename wl_seat.c to seat.c
I never got why we have a wl_ prefix here.
2020-03-04 03:21:40 +01:00
Jan Beich
2bad34e024 backend/session: allow GPU enumeration on FreeBSD
f11ee5b418
2020-02-17 10:43:58 +01:00
Rouven Czerwinski
144d2041ad backend/drm: remove overzealous finish_drm_surface
The previous PR was overzealous in adding a finish_drm_surface call
which was also done by the caller. Remove the call and also move the
comment to the correct code location.
2020-01-24 19:57:09 +01:00