Commit Graph

578 Commits

Author SHA1 Message Date
Simon Ser 7ec5bf6b10 backend: introduce wlr_backend_finish
This new functions cleans up the common backend state. While this
currently only emits the destroy signal, this will also clean up
the renderer and allocator in upcoming patches.
2021-05-21 22:13:54 +02:00
Simon Ser 9ca743f9fd backend/drm: use wlr_texture_from_buffer 2021-05-17 16:22:43 +02:00
Kenny Levinsen 2603a5dee7 backend/drm: Do not require mode commit on enable
If a mode is not provided, use the current mode intead.

Closes: https://github.com/swaywm/wlroots/issues/2904
2021-04-30 21:33:28 +02:00
Simon Ser a1e8a639b3 backend/drm: introduce drm_connector_commit_state
Backend-initiated mode changes can use this function instead of
going through drm_connector_set_mode. drm_connector_set_mode becomes
a mere drm_connector_commit_state helper.
2021-04-29 19:51:57 +02:00
Simon Ser e543e26206 backend/drm: take a wlr_drm_connector instead of a wlr_output
No need to take a generic wlr_output, we already know the output
comes from the DRM backend at that point.
2021-04-29 19:51:57 +02:00
Simon Ser e06c62af77 backend/drm: take output state arg in drm_connector_commit_buffer
This will allow a whole state to be applied at once, instead of
individually applying the buffer and the mode.
2021-04-29 19:51:57 +02:00
Simon Ser 218955ce95 backend/drm: remove mode arg from drm_connector_set_mode
All of the information is in wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 7aba881c47 backend/drm: remove mode arg from drm_connector_init_renderer
This is now unused.
2021-04-29 19:51:57 +02:00
Simon Ser 31082a0554 backend/drm: remove wlr_drm_crtc_state.mode
Replace it with drm_connector_state_mode, which computes the mode
from the wlr_output_state to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser dfea0ff31d backend/drm: remove wlr_drm_crtc_state.active
Replace it with drm_connector_state_active, which figures out
whether the connector is active depending on the wlr_output_state
to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser 485ecc11a6 backend/drm: remove wlr_drm_crtc.pending_modeset
Replace it with a new drm_connector_state_is_modeset function that
decides whether a modeset is necessary directly from the
wlr_output_state which is going to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser c9c2d7539c backend/drm: fill scratch wlr_output_state for set_mode
Populate the wlr_output_state when setting a mode. This will allow
drm_connector_set_mode to stop relying on ephemeral fields in
wlr_drm_crtc. Also drm_connector_set_mode will be able to apply
both a new buffer and a new mode atomically.
2021-04-29 19:51:57 +02:00
Simon Ser 1a9701cd7c backend/drm: take wlr_output_state as arg in commit callers
Instead of relying on wlr_output.pending to be empty when performing
backend-initiated CRTC commits, use a zero wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 8f90d7f8f5 backend/drm: take wlr_output_state as arg in crtc_commit
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
2021-04-29 19:51:57 +02:00
Simon Ser e7f68ba081 backend/drm: fix allocator DRM FD on multi-GPU setups
On multi-GPU setups, there is a primary DRM backend and secondary
DRM backends. wlr_backend_get_drm_fd will always return the parent
DRM FD even on secondary backends, so that users always use the
primary device for rendering.

However, for our internal rendering we want to use the secondary
device. Use allocator_autocreate_with_drm_fd to make sure the
allocator will create buffers on the secondary device.

We do something similar to ensure our internal rendering will
happen on the secondary device with renderer_autocreate_with_drm_fd.

Fixes: cc1b66364c ("backend: use wlr_allocator_autocreate")
2021-04-29 15:58:56 +02:00
Simon Ser 619a975025 render: remove wlr_ prefix from wlr_renderer_autocreate_with_drm_fd
This function is only required because the DRM backend still needs
to perform multi-GPU magic under-the-hood. Remove the wlr_ prefix
to make it clear it's not a candidate for being made public.
2021-04-29 09:46:34 +02:00
Simon Ser 6bf2406dbf backend/drm: reword wlr_renderer failure message
Remove the assumption about EGL.
2021-04-29 09:38:10 +02:00
Simon Zeni cc1b66364c backend: use wlr_allocator_autocreate 2021-04-28 20:55:57 +02:00
Simon Zeni 144189674e backend: introduce backend_get_buffer_caps 2021-04-28 20:55:57 +02:00
Simon Zeni c75aa71816 render/gbm_allocator: make wlr_gbm_allocator_create return a wlr_allocator 2021-04-28 20:55:57 +02:00
Simon Ser 0411dc0663 Revert "backend/drm: fail instead of stripping a modifier"
This reverts commit f9f90b4173.

gbm_bo_get_modifier may return a modifier in these cases:

- The kernel doesn't support modifiers but Mesa does
- WLR_DRM_NO_MODIFIERS=1 is set

However, in both of these cases, the gbm_bo has been allocated
without modifiers.

There is already a check in drm_fb_create for modifiers:
wlr_drm_format_set_has will make sure buffers with an explicit
modifier will be rejected if the DRM backend doesn't support them.
So no need for an additional check in get_fb_for_bo.

Closes: https://github.com/swaywm/wlroots/issues/2896
2021-04-27 15:38:10 +02:00
Simon Ser 4839664a92 backend/drm: carry on when disabling a CRTC fails
On GPU unplug, disabling a CRTC can fail with EPERM.

References: https://github.com/swaywm/wlroots/pull/2575#issuecomment-761771264
2021-04-27 09:11:44 +02:00
Simon Ser 9b0e0970f9 backend/drm: destroy backend on udev remove event
Any use of the DRM FD after the remove event results in a "Permission
denied" error.
2021-04-27 09:11:44 +02:00
Simon Ser c49ea9ef4f backend/drm: destroy when parent is destroyed 2021-04-27 09:11:44 +02:00
Simon Ser e804de923d backend/drm: clarify error message on drmModeAddFB fallback
The previous code would always print "falling back to legacy method",
even if the format wasn't ARGB8888.

Drop get_fb_for_bo_legacy, since the code can just be inlined without
hurting readability.

Ideally we should only fallback to drmModeAddFB if the error code
indicates the BE failure, but the original PR [1] doesn't say what
error code is returned by the kernel.

[1]: https://github.com/swaywm/wlroots/pull/2569
2021-04-26 23:12:53 +02:00
Simon Ser f9f90b4173 backend/drm: fail instead of stripping a modifier
We shouldn't strip a modifiers from buffers, because the will make
the kernel re-interpret the data as LINEAR on most drivers,
resulting in an incorrect output on screen.
2021-04-26 23:12:53 +02:00
Simon Zeni 84dea55b20 render: rename get_dmabuf_render_formats into get_render_formats 2021-04-15 17:10:06 +02:00
Simon Ser 053ebe7c27 backend/drm: terminate display on drmHandleEvent failure 2021-04-14 23:56:56 +02:00
Stephan Hilb 9f012cac2f drm: check for PRIME support
PRIME support for buffer sharing has become mandatory since the renderer
rewrite. Make sure we check for the appropriate capabilities in backend,
allocator and renderer.

See also #2819.
2021-04-10 10:49:55 +02:00
Simon Ser 8ccb4bbb5f backend/drm: stop testing for buffer in drm_connector_commit_buffer
We now do the test in drm_connector_test, called from
drm_connector_commit.
2021-04-06 20:35:15 +02:00
Simon Ser d0bf750916 backend/drm: use atomic test-only commits for direct scan-out
This allows callers to use wlr_output_test to figure out whether a
buffer can be scanned out prior to committing the output.
2021-04-06 20:35:15 +02:00
Simon Ser 7efc2d05b7 backend/drm: downgrade test-only commit failure log level
Let's not clutter the logs with error messages when a test-only
atomic commit fails.
2021-04-06 20:35:15 +02:00
Simon Ser 5088e25eaf backend/drm: don't set NONBLOCK with TEST_ONLY
The kernel ignores NONBLOCK when TEST_ONLY is set. Let's just not
set it, to make it clear it's unused.
2021-04-06 20:35:15 +02:00
Simon Ser 6bfbf35618 backend/drm: reject DMA-BUFs with flags
We cannot scan-out DMA-BUFs with any flag right now.
2021-04-06 15:02:57 +02:00
Simon Ser 1ec97bdf4f backend/drm: improve logs in drm_fb_create
Downgrade errors to DEBUG level, because drm_fb_create is used in
test_buffer, so errors aren't always fatal. Add ERROR logs at call
sites where a failure is fatal, to make it clear something wrong
happened.
2021-04-06 14:57:59 +02:00
Simon Ser 511e42be5e backend/drm: try to import buffer when testing it
If the import to KMS succeeds, we have a better chance to be able to
scan it out.

Importing is also necessary for test-only commits, which we want to
add in the future.
2021-04-06 14:57:59 +02:00
Simon Ser 7709a965e5 backend/drm: use format table in test_buffer
Instead of an ad-hoc strip_alpha_channel function, use the
centralized format table to get an opaque substitute.
2021-03-31 17:29:31 +02:00
Simon Zeni c8b3536b01 backend/drm: use pixel format table in renderer 2021-03-25 10:55:54 +01:00
Simon Ser c740fccc9d Fix buffer blit matrices
There was a missing wlr_matrix_scale call, so we ended up with black
frames.

Closes: https://github.com/swaywm/wlroots/issues/2780
2021-03-16 17:57:51 +01:00
Simon Ser 44fa2c4b49 output: fix transform matrix for 90/270 rotations
We need to adjust the second translation depending on the transform
we applied.

Fixes: 9601a2abf0 ("output: improve transform matrix calculation"
Closes: https://github.com/swaywm/wlroots/issues/2774
2021-03-11 22:52:38 +01:00
Simon Zeni 9601a2abf0 output: improve transform matrix calculation
Compute only the transform matrix in the output. The projection matrix
will be calculated inside the gles2 renderer when we start rendering.

The goal is to help the pixman rendering process.
2021-03-10 15:33:36 +01:00
Simon Ser a02da8e6f6 backend/drm: add new writeback and SPI connector types
We already depend on libdrm 2.4.95, which is the first to have the
writeback connector type.
2021-03-05 17:59:26 +01:00
Simon Ser f3758d1d0a backend: add error messages in attach_render impls 2021-02-18 22:14:19 +01:00
Manuel Stoeckl a290d7a78d Make implementation function lists static const
This requires a change to the type of `struct wlr_tablet` and
`wlr_tablet_init` signature, both of which are part of the unstable API.
2021-02-05 10:04:20 +01:00
Simon Ser 73ffab70b0 backend/drm: don't blit in drm_fb_import
Instead blit in drm_plane_lock_surface. This makes drm_fb_import simpler
and better fits its name.
2021-01-24 18:33:56 +01:00
Simon Ser 4af85f4c19 backend/drm: simplify drm_fb_lock_surface
Make it take a plane instead, and rename to drm_plane_lock_surface.
2021-01-24 18:22:03 +01:00
Simon Ser 04d89a8bc5
backend/drm: fix modifiers for cursor plane buffers
In 93cd3a79b2 ("backend/drm: stop using GBM flags"), we stopped
using the GBM_BO_USE_LINEAR flag in favor of a modifier list set
to { DRM_FORMAT_MOD_LINEAR }. However, the last argument of
drm_plane_init_surface disables modifiers -- so the buffer will just
get allocated with an implicit modifier, without necessarily being
LINEAR.

To fix this, allow modifiers when allocating the cursor buffers.
wlr_drm_plane.formats should already have the necessary LINEAR
restrictions.

Fixes: 93cd3a79b2 ("backend/drm: stop using GBM flags")
2021-01-17 22:25:18 +01:00
Simon Ser f17b0f975d backend/drm: add wlr_drm_connector_get_id
This allows a compositor to get a KMS connector object ID from a
wlr_output. The compositor can then query more information about
the connector via libdrm.

This gives more freedom to compositors and allows them to read
KMS properties that wlroots doesn't know about. For instance,
they could read the EDID or the suggested_{X,Y} properties and
change their output configuration based on that.
2021-01-17 12:42:32 +01:00
Simon Ser cb6f584496 backend/drm: add support for the subconnector property
The subconnector property indicates the connector sub-type. This is
useful because that usually indicates what kind of connector the user
has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will
indicate a DVI subconnector. Also some laptops have non-DP connectors
that are internally linked to a DP port on the GPU.

Set the output description accordingly.

See https://drmdb.emersion.fr/properties/3233857728/subconnector
2021-01-17 12:42:25 +01:00
Simon Ser 9e98f497af backend/drm: use local DRM FD for wlr_rend
The new wlr_renderer_autocreate API is great for compositors, however
it causes some issues with DRM multi-GPU support.

A DRM child backend wants the compositor to use the parent GPU, so it
exposes the parent's DRM FD in get_drm_fd. However, in order to be able
to perform multi-GPU buffer copies, the child DRM backend still needs to
create a local renderer.

Use the new private wlr_renderer_autocreate_with_drm_fd function to
avoid creating a renderer for the parent GPU.

Fixes: e128e6c08d ("render: drop egl parameters from wlr_renderer_autocreate")
2021-01-16 22:52:26 +01:00