This is a common interface that can be used for all primary selection
protocols, as discussed in [1]. A new function wlr_seat_set_primary_selection
is added to set the primary selection for all protocols.
The seat now owns again the source, and resets the selection to NULL when
destroyed.
[1]: https://github.com/swaywm/wlroots/issues/1367#issuecomment-442403454
This commits completely refactors wlr_gtk_primary_selection. The goal is to
remove gtk-primary-selection state from the seat and better handle inert
resources where it makes sense.
wlr_seat_client.primary_selection_devices has been removed and replaced by
wlr_gtk_primary_selection_device. This allows us to make offers inert when the
current selection is replaced.
wlr_seat_set_primary_selection has been removed because it relied on wlr_seat
instead of wlr_gtk_primary_selection_device_manager. A new function,
wlr_gtk_primary_selection_device_manager_set_selection (candidate for the
longest function name in wlroots) has been added. It doesn't take a serial
anymore as serial checking only makes sense for set_selection requests coming
from Wayland clients (serial checking is now done in the Wayland interface
implementation).
Since wlr_gtk_primary_selection_device_manager is now required to set the
selection, a new function wlr_xwayland_set_gtk_primary_selection_device_manager
(candidate number two for longest function name) has been added.
Devices are now made inert when the seat goes away.
Future work includes removing the last primary selection bits from the seat,
mainly wlr_seat.primary_selection_source and wlr_seat.events.primary_selection,
replacing those with new fields in wlr_gtk_primary_selection_device. Or maybe
we could keep those in the seat and replace them with a re-usable interface
(for future zwp_primary_selection_v1 support). We need to think how we'll sync
these three protocols (GTK, X11 and wayland-protocols).
See https://github.com/swaywm/wlroots/issues/1388
wlr_subsurface_from_wlr_surface can return NULL if the wl_surface is still
alive and if the wl_subsurface has been destroyed. Make sure we check for NULL.
Fixes https://github.com/swaywm/sway/issues/3195
This commit makes it possible for a single client to have multiple data devices
for the same seat. This fixes issues with Firefox.
This mainly removes wlr_data_source.offer. We make sure we create one data
offer per device. We now make the offer inert when the source is destroyed.
Fixes the second half of https://github.com/swaywm/wlroots/issues/1041
The read format is dependent on the output, so we first need to make it
current. This fixes a race condition in wlr-screencopy-v1 where a dmabuf
client would cause EGL_NO_SURFACE to be bound at the time when
screencopy needs to query for the preferred format, causing GL errors.
When a client was creating multiple data devices for the same seat, we were
only creating one resource. This is a protocol error.
Instead, create one offer per data device.
This commit also makes offers inert when their source is destroyed.
Fixes part of https://github.com/swaywm/wlroots/issues/1041
Supersedes https://github.com/swaywm/wlroots/pull/1113
ie. don't destroy surface->toplevel on xdg_toplevel destroy. Instead do this on
xdg_surface destroy.
This allows compositors to add toplevel listeners when the surface appears and
remove them when the surface is destroyed.
We were assuming GL_BGRA_EXT was always supported.
We now check that it's supported for rendering. We fail if it isn't because
this format is specified as "always supported" by the Wayland protocol.
We also check if it's supported for reading pixels. A new preferred_read_format
function returns the preferred format that can be used to read pixels. This is
used by the screencopy protocol.
There was a missing copy_drm_surface_mgpu call in drm_connector_schedule_frame
so we asked for a pageflip with an unknown BO, resulting in ENOENT.
Additionally, this commit makes schedule_frame return a bool indicating
failures. This allows schedule_frame_handle_idle_timer to only set
frame_pending to true if a frame has been successfully scheduled. Thus, if a
pageflip fails, rendering won't be blocked forever anymore.
In case a pageflip is already pending, true is returned because a frame has
already been scheduled and will be sent sometime soon.
shm_open is a POSIX function creating an in-memory file. Using it simplifies
the code and removes the dependency on XDG_RUNTIME_DIR. The only downside is
that we need to generate a random name for the shm file.
Prior to this commit, setting up a zero timeout resulted in a timer that never
expires, which isn't particularly useful.
This commit allows setting up timers that expire immediately, which is useful
to immediately enter idle state.
wlr_cursor: make sure the output doesn't have a cursor before
creating a new one
wlr_output_layout: don't emit the "add" event when the output is
already in the layout
The prevoius implementation would always raise an error in the following sequence:
-> enter
-> leave
<- enable
The text-input type is not equipped to manage the validity of clents' requests, which should be handled in the compositor, as rootston does.
If a client uses an older version of the dmabuf protocol, use the
`formats` event instead of `modifiers` (since that didn't exist in older
versions).
With a bit of necessary guessing, support dmabuf importing even when
EGL_EXT_image_dma_buf_import_modifiers isn't present instead of
failing up front.
This prevents the idle event to be activated on a destroyed
output.
This also makes the backend responsible for free-ing modes, as it
is the one allocating them and adding them to the list. Note that
the DRM backend (the only one using modes) already frees them.
Since the source doesn't always come from a client, this field
doesn't make sense. It is replaced by a new "finalized" field in
wlr_client_data_source. This is used to make sure set_actions is
not sent after start_drag has been sent.
A check in data_offer_choose_action has been removed: if an offer
has been sent then start_drag has been called, no need to check.
I also wanted to add a check for wl_data_source.offer, but it
turns out (1) this isn't in the spec (2) it breaks GTK+.
This is some preliminary work for Firefox on Wayland compatibility.
This desynchronizes our rendering loop with the vblank cycle.
In case a compositor doesn't swap buffers but schedules a frame,
emitting a frame event immediately enters a busy-loop.
Instead, ask the backend to send a frame when appropriate. On
Wayland we can just register a frame callback on our surface. On
DRM we can do a no-op pageflip.
Fixes#617Fixesswaywm/sway#2748
When we send an output frame event, we should not assume that the
compositor is going to call wlr_output_swap_buffers in response to it.
If the compositor does not swap the buffers, the idle event source still
exists and is executed every time the Wayland event loop becomes idle,
which means we send frame events repeatedly until the buffers are
swapped.
This moves the removal of the idle event source out of
wlr_output_swap_buffers and into wlr_output_send_frame, where it is
guaranteed to be removed.
This calculates and returns the effective damage of the surface in
surface coordinates, including the client damage (in buffer
coordinates), and damage induced by resize or move events.
* Rename the constraint_create signal to new_constraint for
consistency
* Move the constraint_destroy signal to the constraint itself
* Use rotate_child_position instead of duplicating logic
* Fix inert constraint resource handling
* Style fixes
I do not think the conversion is specifically defined, but on my system and SirCmpwn's
the floats are rounded instead of floored, which is incorrect in this case, since
for a range from 0 to 256, any value greater or equal to 0 and less than 256 is valid.
I.e. [0;256[, or 0 <= x < 256, but if x is e.g. -0.1, then it will be rounded to 0, which
is invalid. The correct behavior would be to floor to -1.
To prevent wl_keyboard keymap being written to by clients, use a unique
file descriptor for each wl_keyboard resource.
Reference: weston, commit 76829fc4eaea329d2a525c3978271e13bd76c078
sx, sy used to store the buffer offset of the drag surface which was
then be added (by rootston) to the drag icon position.
Buffer offsets are handled already in surface_intersect_output
(output.c) so they were added twice for dnd surfaces.
A few pedantic changes and unused variables (1-4), and genuine bugs (5,
6).
The reports with the corresponding files and lines numbers are as
follows.
1. backend/libinput/tablet_pad.c@31,44,57
"Allocator sizeof operand mismatch"
"Result of 'calloc' is converted to a pointer of type 'unsigned int',
which is incompatible with sizeof operand type 'int'"
2. types/tablet_v2/wlr_tablet_v2_pad.c@371
"Allocator sizeof operand mismatch"
"Result of 'calloc' is converted to a pointer of type 'uint32_t', which
is incompatible with sizeof operand type 'int'"
3. types/wlr_cursor.c@335
"Dead initialization"
"Value stored to 'dx'/'dy' during its initialization is never read"
4. rootston/xdg_shell.c@510
"Dead initialization"
"Value stored to 'desktop' during its initialization is never read"
5. types/tablet_v2/wlr_tablet_v2_pad.c@475
"Dereference of null pointer"
"Access to field 'strips' results in a dereference of a null pointer
(loaded from field 'current_client')"
The boolean logic was incorrect (c.f. the check in the following
function).
6. examples/idle.c@163,174,182
"Uninitialized argument value"
"1st function call argument is an uninitialized value"
If close_timeout != 0, but simulate_activity_timeout >= close_timeout,
the program would segfault at pthread_cancel(t1).
After destroying a keyboard input device, seat's listeners could still be pointing to destroyed wlr_input_device signals. This patch makes sure the references are removed while the input device is being destroyed.
Implement the tablet-v2 tablet tool's implicit grab semantics for
buttons and tip.
This avoids losing focus (to other [sub]surfaces) when a button is held,
or the tip is down.
This should help when the device is used close to a surface's border and
would otherwise have to be very precise.
Implement the basic logic for tablet-v2 tablet_pad's grabs. And plug in
the default grab.
Features like "holding" the focus should be implemented via grabs, like
they are for pointer and keyboard.
There were a few issues after rebase, that the merge algorithm didn't
throw at my face:
wlr_output did a check on the actual role, not a string anymore, so that
had to go to allow tablet-v2 to set cursor surfaces.
A few L_DEBUG/L_ERRORs were still around
There was a user-after-free in tablet-group free()ing, probably after
insufficient testing from a previous feedback pass
The previous naming was based on the input-device capability names from
libinput.
With code that uses the libinput_tablet_tool and mapping into tablet-v2,
this is confusing, so the name is changed to follow the names used in
the protocol.
To begin with, no-op updates are unnecessary, so this patch is an
improvement on its own.
Then, this fixes hotplugging issues with xwayland. xwayland waits
for both wl_output and xdg_output to send a "done" event. However,
it doesn't handle well desynchronized "done" updates: if xdg-output
sends "done" twice, the second one will wait for the next wl_output
"done" event. This is an issue when the first is a no-op and the
second is a real update: the second isn't applied. I've considered
patching xwayland instead, but it seems pretty complicated.
wl_resource_for_each_safe isn't safe to use here because it accesses
the list's head memory one last time at the end of the loop. Work
around this by breaking out early.
==19880==ERROR: AddressSanitizer: heap-use-after-free on address 0x60d0000e6368 at pc 0x7fab68619de2 bp 0x7ffd5c91cee0 sp 0x7ffd5c91ced0
READ of size 8 at 0x60d0000e6368 thread T0
#0 0x7fab68619de1 in wlr_seat_destroy ../types/seat/wlr_seat.c:179
#1 0x7fab68619fb9 in handle_display_destroy ../types/seat/wlr_seat.c:196
#2 0x7fab688e4f8f in wl_priv_signal_emit src/wayland-server.c:2024
#3 0x7fab688e56ca in wl_display_destroy src/wayland-server.c:1092
#4 0x40c11e in server_fini ../sway/server.c:138
#5 0x40b1a8 in main ../sway/main.c:438
#6 0x7fab67b5e18a in __libc_start_main ../csu/libc-start.c:308
#7 0x409359 in _start (/opt/wayland/bin/sway+0x409359)
0x60d0000e6368 is located 24 bytes inside of 144-byte region [0x60d0000e6350,0x60d0000e63e0)
freed by thread T0 here:
#0 0x7fab6a7d6880 in __interceptor_free (/lib64/libasan.so.5+0xee880)
#1 0x7fab68619805 in seat_client_handle_resource_destroy ../types/seat/wlr_seat.c:97
#2 0x7fab688e5025 in destroy_resource src/wayland-server.c:688
previously allocated by thread T0 here:
#0 0x7fab6a7d6e50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fab686198df in seat_handle_bind ../types/seat/wlr_seat.c:127
#2 0x7fab6530503d in ffi_call_unix64 (/lib64/libffi.so.6+0x603d)
It is common to want to iterate an xdg-surface's popups separately from
the toplevel and subsurfaces. For example, popups are typically rendered
on top of most other surfaces.
wlr_xdg_surface_for_each_surface continues to iterate both surfaces and
popups to maintain backwards compatibility.
- Rename handlers to <type>_handle_resource_destroy and
<type>_handle_destroy to be coherent
- Make sure we never destroy wl_resources when we shouldn't
Updates #999
