Commit Graph

664 Commits

Author SHA1 Message Date
Simon Ser f5900c1f00 backend/drm: remove primary swapchain
We can't nuke it completely, we still need it for multi-GPU.
2021-07-28 22:52:35 +02:00
Simon Ser 85d7ad2eef backend/drm: allow legacy scan-out if FB props match
Historically we haven't allowed direct scan-out for legacy KMS,
because legacy misses the functionality to make sure a buffer can
be scanned out. However with renderer v6 the backend can't figure
out anymore whether the buffer comes from its internal swap-chain,
because the backend doesn't have an internal swap-chain.

The legacy KMS API guarantees that the driver won't reject a buffer
as long as it's been allocated with the same parameters as the
previous one. Let's check this in legacy_crtc_test.
2021-07-28 22:52:35 +02:00
Simon Ser d6f0fc251e backend/drm: implement get_primary_formats 2021-07-28 22:52:35 +02:00
Simon Zeni 04d4fb536d render/wlr_texture: put wlr_texture_from_buffer into the public API 2021-07-22 22:28:24 +02:00
ayaka 70fb21c35b backend: make DRM and libinput backends optional
Co-authored-by: Simon Ser <contact@emersion.fr>
2021-07-22 09:56:38 -04:00
Simon Ser 66c42f4fcb backend/drm: add DRM_MODE_CONNECTOR_USB to conn_get_name
See 757e26712337 ("drm/uapi: Add USB connector type") in the kernel
tree.
2021-07-21 08:47:35 +02:00
Simon Ser cc8bc0db20 backend/drm: stop restoring CRTCs on exit
This is the cause of the spurious "drmHandleEvent failed" messages
at exit. restore_drm_outputs calls handle_drm_event in a loop without
checking whether the FD is readable, so drmHandleEvent ends up with a
short read (0 bytes) and returns an error.

The loop's goal is to wait for all queued page-flip events to complete,
to allow drmModeSetCrtc calls to succeed without EBUSY. The
drmModeSetCrtc calls are supposed to restore whatever KMS state we were
started with. But it's not clear from my PoV that restoring the KMS
state on exit is desirable.

KMS clients are supposed to save and restore the (full) KMS state on VT
switch, but not on exit. Leaving our KMS state on exit avoids unnecessary
modesets and allows flicker-free transitions between clients. See [1]
for more details, and note that with Pekka we've concluded that a new
flag to reset some KMS props to their default value on compositor
start-up is the best way forward. As a side note, Weston doesn't restore
the CRTC by does disable the cursor plane on exit (see
drm_output_deinit_planes, I still think disabling the cursor plane
shouldn't be necessary on exit).

Additionally, restore_drm_outputs only a subset of the KMS state.
Gamma and other atomic properties aren't accounted for. If the previous
KMS client had some outputs disabled, restore_drm_outputs would restore
a garbage mode.

[1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
2021-07-20 15:33:26 +02:00
Simon Ser f94eb174c7 backend/drm: fix NULL data in handle_drm_event
wl_event_loop_add_fd was called with a NULL data argument, but the
function expects the data argument to be set to the wlr_drm_backend.

Fixes: 053ebe7c27 ("backend/drm: terminate display on drmHandleEvent failure")
2021-07-19 09:01:21 -04:00
Simon Ser 709190c4c8 backend/drm: remove wlr_output_impl.export_dmabuf
This is now provided by the generic wlr_output implementation.
2021-07-12 13:29:03 -04:00
Simon Ser f67cfb2ce2 backend/drm: remove backend arg from wlr_drm_interface.crtc_commit
The callee can just get it from the wlr_drm_connector.
2021-07-09 15:31:19 -04:00
Simon Ser fde56c20b4 backend/drm: move legacy-specific checks to legacy.c
Now that we have a test_only arg in crtc_commit, we can move the
legacy checks to legacy.c.
2021-07-09 15:31:19 -04:00
Simon Ser 017555651b backend/drm: add test_only arg to wlr_drm_interface.crtc_commit
Right now callers of drm_crtc_commit need to check whether the
interface is legacy or atomic before passing the TEST_ONLY flag.
Additionally, the fallbacks for legacy are in-place in the common
code.

Add a test_only arg to the crtc_commit hook. This way, there's no
risk to pass atomic-only flags to the legacy function (add an assert
to ensure this) and all of the legacy-specific logic can be put back
into legacy.c (done in next commit).
2021-07-09 15:31:19 -04:00
Simon Ser c1b27cc499 backend/drm: stop using drm_surface_make_current in drm_surface_blit
drm_surface_make_current and drm_surface_unset_current set implicit
state and are an unnecessary mid-layer. Prefer to use directly
wlr_renderer_begin_with_buffer, which automatically unsets the back
buffer on wlr_renderer_end.

I'd like to get rid of drm_surface_make_current once we stop using
it for the primary swapchain.
2021-07-08 14:44:42 -04:00
Simon Ser d71ed635b9 backend/drm: force linear layout for multi-GPU buffers
Some buffers need to be copied across GPUs. Such buffers need to be
allocated with a format and modifier suitable for both the source
and the destination.

When explicit modifiers aren't supported, we were forcing the buffers
to be allocated with a linear layout, because implicit modifiers
aren't portable across GPUs. All is well with this case.

When explicit modifiers are supported, we were advertising the whole
list of destination modifiers, in the hope that the source might
have some in common and might be able to allocate a buffer with a
more optimized layout. This works well if the source supports explicit
modifiers. However, if the source doesn't, then wlr_drm_format_intersect
will fallback to implicit modifiers, and everything goes boom: the
source uses a GPU-specific tiling and the destination interprets it
as linear.

To avoid this, just force linear unconditionally. We'll be able to
revert this once we have a good way to indicate that an implicit modifier
isn't supported in wlr_drm_format_set, see [1].

[1]: https://github.com/swaywm/wlroots/pull/2815

Closes: https://github.com/swaywm/wlroots/issues/3030
2021-07-08 17:06:20 +02:00
Simon Zeni e192d87731 move wlr_box from /types to /util 2021-07-06 21:43:17 +02:00
Simon Ser 4dee7a2f6f backend/drm: don't clear pending cursor FB on failed commit
The previous fix tried to side-step cursor->pending_fb completely.
However that messes up our buffer locking mechanism.

Instead, stop clearing the pending cursor FB on a failed commit. The
pending cursor FB will remain for the next commit.

Fixes: 6c3d080e25 ("backend/drm: populate cursor plane's current_fb")
2021-07-05 10:55:41 -04:00
Simon Ser 5f26360bd8 Revert "backend/drm: populate cursor plane's current_fb"
This reverts commit 6c3d080e25.

Populating wlr_drm_plane.current_fb messes up the buffer's locking.
The previous buffer is released while it's still being displayed
on-screen.
2021-07-05 10:55:41 -04:00
Simon Ser a38baec1f8 buffer: make enum wlr_buffer_cap public
Custom backends and renderers need to implement
wlr_backend_impl.get_buffer_caps and
wlr_renderer_impl.get_render_buffer_caps. They can't if enum
wlr_buffer_cap isn't made public.
2021-07-01 16:40:19 -04:00
Simon Ser dbb0e2f75b Remove unused wlr_list.h includes 2021-07-01 10:35:39 -04:00
Simon Ser 264d4e2bce backend/drm: rename page_flip_handler to handle_page_flip
This is more consistent with the rest of the wlroots naming.
2021-06-24 11:56:45 +02:00
Simon Ser 2f615468b6 backend: add output state allow-lists
Right now, when a new output state field is added, all backends by
default won't reject it. This means we need to add new checks to
each and every backend when we introduce a new state field.

Instead, introduce a bitmask of supported output state fields in
each backend, and error out if the user has submitted an unknown
field.

Some fields don't need any backend involvment to work. These are
listed in WLR_OUTPUT_STATE_BACKEND_OPTIONAL as a convenience.
2021-06-20 23:17:08 +02:00
Simon Ser 6c3d080e25 backend/drm: populate cursor plane's current_fb
The set_cursor() hook is a little bit special: it's not really
synchronized to commit() or test(). Once set_cursor() returns true,
the new cursor is part of the current state.

This fixes a state where wlr_drm_connector.cursor_enabled is true
but there is no FB available. This is triggered by set_cursor()
followed by a failed commit(), which resets pending_fb.

We should definitely fix the output interface to make the cursor part
of the pending state, but that's a more involved change.
2021-06-17 00:25:27 +02:00
Simon Ser 3345eaca89 backend/drm: remove test_buffer
Instead, call drm_connector_set_pending_fb.
2021-06-13 10:57:17 +02:00
Simon Ser eca5d2f37f backend/drm: move session check from test_buffer to drm_connector_test
The other caller (drm_connector_commit_state) already checks this.
2021-06-13 10:57:17 +02:00
Simon Ser 758f117442 backend/drm: move drm_connector_set_pending_fb up
This will be used in drm_connector_test shortly.
2021-06-13 10:57:17 +02:00
Simon Ser f55b43ddd6 backend/drm: allocate a CRTC in drm_connector_test
We can't perform a test-only atomic commit if the connector is
missing a CRTC.
2021-06-13 10:57:17 +02:00
Simon Ser cb378600e4 backend/drm: allocate a CRTC in drm_connector_commit_state
drm_connector_set_pending_fb needs a CRTC to import the buffer.
2021-06-13 10:57:17 +02:00
Simon Ser b180d3482f backend/drm: introduce drm_connector_alloc_crtc
This function allocates a CRTC for a connector if necessary.
2021-06-13 10:57:17 +02:00
Simon Ser 63f891e393 backend/drm: allow committing a buffer and a mode together
Set the plane's pending FB before calling drm_connector_set_mode.
2021-06-13 10:57:17 +02:00
Simon Ser e89cf5f047 backend/drm: use atomic test-only commits for modifier fallback
Instead of trying to perform a real modeset in init_renderer,
perform an atomic test-only commit to find out whether disabling
modifiers is necessary because of bandwidth limitations.

This decouples init_renderer from the actual commit, making it
possible to modeset an output with a user-supplied buffer instead
of a black frame.

We loose the ability to make sure the buffers coming from the
swapchain will work fine when using the legacy interface. This
can break i915 when atomic is disabled and modifiers enabled.
But i915 always has atomic (so the user must explicitly disable it
to run into potential bandwidth limitations) and is the only known
problematic driver.
2021-06-13 10:57:17 +02:00
Simon Ser b2f6db3533 render: drop wlr_ prefix from wlr_renderer_bind_buffer
Make it clear this function is a private wlroots API and will stay
that way.
2021-06-09 10:26:09 +02:00
Simon Ser b86a0c8d8f backend/drm: move cursor fields to wlr_drm_connector
Doesn't make a lot of sense to split the cursor fields between
wlr_drm_plane and wlr_drm_connector. Let's just move everything to
wlr_drm_connector.
2021-06-02 11:08:52 +02:00
Simon Ser 2b0a1aeed5 output: take a wlr_buffer in set_cursor
Instead of passing a wlr_texture to the backend, directly pass a
wlr_buffer. Use get_cursor_size and get_cursor_formats to create
a wlr_buffer that can be used as a cursor.

We don't want to pass a wlr_texture because we want to remove as
many rendering bits from the backend as possible.
2021-06-02 11:08:52 +02:00
Simon Ser 01e0f51fad backend/drm: introduce drm_plane_pick_render_format
This is a new helper function to pick a render format suitable for
a plane.

The next commit will use it to initialize the cursor multi-GPU
surface.
2021-06-02 11:08:52 +02:00
Simon Ser e06ea4e84a backend/drm: remove format arg from drm_plane_init_surface
This was always set to ARGB8888.
2021-06-02 11:08:52 +02:00
Simon Ser 9e9be83a58 backend/drm: implement get_cursor_formats and get_cursor_size 2021-06-02 11:08:52 +02:00
Simon Ser 7ec5bf6b10 backend: introduce wlr_backend_finish
This new functions cleans up the common backend state. While this
currently only emits the destroy signal, this will also clean up
the renderer and allocator in upcoming patches.
2021-05-21 22:13:54 +02:00
Simon Ser 9ca743f9fd backend/drm: use wlr_texture_from_buffer 2021-05-17 16:22:43 +02:00
Kenny Levinsen 2603a5dee7 backend/drm: Do not require mode commit on enable
If a mode is not provided, use the current mode intead.

Closes: https://github.com/swaywm/wlroots/issues/2904
2021-04-30 21:33:28 +02:00
Simon Ser a1e8a639b3 backend/drm: introduce drm_connector_commit_state
Backend-initiated mode changes can use this function instead of
going through drm_connector_set_mode. drm_connector_set_mode becomes
a mere drm_connector_commit_state helper.
2021-04-29 19:51:57 +02:00
Simon Ser e543e26206 backend/drm: take a wlr_drm_connector instead of a wlr_output
No need to take a generic wlr_output, we already know the output
comes from the DRM backend at that point.
2021-04-29 19:51:57 +02:00
Simon Ser e06c62af77 backend/drm: take output state arg in drm_connector_commit_buffer
This will allow a whole state to be applied at once, instead of
individually applying the buffer and the mode.
2021-04-29 19:51:57 +02:00
Simon Ser 218955ce95 backend/drm: remove mode arg from drm_connector_set_mode
All of the information is in wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 7aba881c47 backend/drm: remove mode arg from drm_connector_init_renderer
This is now unused.
2021-04-29 19:51:57 +02:00
Simon Ser 31082a0554 backend/drm: remove wlr_drm_crtc_state.mode
Replace it with drm_connector_state_mode, which computes the mode
from the wlr_output_state to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser dfea0ff31d backend/drm: remove wlr_drm_crtc_state.active
Replace it with drm_connector_state_active, which figures out
whether the connector is active depending on the wlr_output_state
to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser 485ecc11a6 backend/drm: remove wlr_drm_crtc.pending_modeset
Replace it with a new drm_connector_state_is_modeset function that
decides whether a modeset is necessary directly from the
wlr_output_state which is going to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser c9c2d7539c backend/drm: fill scratch wlr_output_state for set_mode
Populate the wlr_output_state when setting a mode. This will allow
drm_connector_set_mode to stop relying on ephemeral fields in
wlr_drm_crtc. Also drm_connector_set_mode will be able to apply
both a new buffer and a new mode atomically.
2021-04-29 19:51:57 +02:00
Simon Ser 1a9701cd7c backend/drm: take wlr_output_state as arg in commit callers
Instead of relying on wlr_output.pending to be empty when performing
backend-initiated CRTC commits, use a zero wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 8f90d7f8f5 backend/drm: take wlr_output_state as arg in crtc_commit
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
2021-04-29 19:51:57 +02:00
Simon Ser e7f68ba081 backend/drm: fix allocator DRM FD on multi-GPU setups
On multi-GPU setups, there is a primary DRM backend and secondary
DRM backends. wlr_backend_get_drm_fd will always return the parent
DRM FD even on secondary backends, so that users always use the
primary device for rendering.

However, for our internal rendering we want to use the secondary
device. Use allocator_autocreate_with_drm_fd to make sure the
allocator will create buffers on the secondary device.

We do something similar to ensure our internal rendering will
happen on the secondary device with renderer_autocreate_with_drm_fd.

Fixes: cc1b66364c ("backend: use wlr_allocator_autocreate")
2021-04-29 15:58:56 +02:00
Simon Ser 619a975025 render: remove wlr_ prefix from wlr_renderer_autocreate_with_drm_fd
This function is only required because the DRM backend still needs
to perform multi-GPU magic under-the-hood. Remove the wlr_ prefix
to make it clear it's not a candidate for being made public.
2021-04-29 09:46:34 +02:00
Simon Ser 6bf2406dbf backend/drm: reword wlr_renderer failure message
Remove the assumption about EGL.
2021-04-29 09:38:10 +02:00
Simon Zeni cc1b66364c backend: use wlr_allocator_autocreate 2021-04-28 20:55:57 +02:00
Simon Zeni 144189674e backend: introduce backend_get_buffer_caps 2021-04-28 20:55:57 +02:00
Simon Zeni c75aa71816 render/gbm_allocator: make wlr_gbm_allocator_create return a wlr_allocator 2021-04-28 20:55:57 +02:00
Simon Ser 0411dc0663 Revert "backend/drm: fail instead of stripping a modifier"
This reverts commit f9f90b4173.

gbm_bo_get_modifier may return a modifier in these cases:

- The kernel doesn't support modifiers but Mesa does
- WLR_DRM_NO_MODIFIERS=1 is set

However, in both of these cases, the gbm_bo has been allocated
without modifiers.

There is already a check in drm_fb_create for modifiers:
wlr_drm_format_set_has will make sure buffers with an explicit
modifier will be rejected if the DRM backend doesn't support them.
So no need for an additional check in get_fb_for_bo.

Closes: https://github.com/swaywm/wlroots/issues/2896
2021-04-27 15:38:10 +02:00
Simon Ser 4839664a92 backend/drm: carry on when disabling a CRTC fails
On GPU unplug, disabling a CRTC can fail with EPERM.

References: https://github.com/swaywm/wlroots/pull/2575#issuecomment-761771264
2021-04-27 09:11:44 +02:00
Simon Ser 9b0e0970f9 backend/drm: destroy backend on udev remove event
Any use of the DRM FD after the remove event results in a "Permission
denied" error.
2021-04-27 09:11:44 +02:00
Simon Ser c49ea9ef4f backend/drm: destroy when parent is destroyed 2021-04-27 09:11:44 +02:00
Simon Ser e804de923d backend/drm: clarify error message on drmModeAddFB fallback
The previous code would always print "falling back to legacy method",
even if the format wasn't ARGB8888.

Drop get_fb_for_bo_legacy, since the code can just be inlined without
hurting readability.

Ideally we should only fallback to drmModeAddFB if the error code
indicates the BE failure, but the original PR [1] doesn't say what
error code is returned by the kernel.

[1]: https://github.com/swaywm/wlroots/pull/2569
2021-04-26 23:12:53 +02:00
Simon Ser f9f90b4173 backend/drm: fail instead of stripping a modifier
We shouldn't strip a modifiers from buffers, because the will make
the kernel re-interpret the data as LINEAR on most drivers,
resulting in an incorrect output on screen.
2021-04-26 23:12:53 +02:00
Simon Zeni 84dea55b20 render: rename get_dmabuf_render_formats into get_render_formats 2021-04-15 17:10:06 +02:00
Simon Ser 053ebe7c27 backend/drm: terminate display on drmHandleEvent failure 2021-04-14 23:56:56 +02:00
Stephan Hilb 9f012cac2f drm: check for PRIME support
PRIME support for buffer sharing has become mandatory since the renderer
rewrite. Make sure we check for the appropriate capabilities in backend,
allocator and renderer.

See also #2819.
2021-04-10 10:49:55 +02:00
Simon Ser 8ccb4bbb5f backend/drm: stop testing for buffer in drm_connector_commit_buffer
We now do the test in drm_connector_test, called from
drm_connector_commit.
2021-04-06 20:35:15 +02:00
Simon Ser d0bf750916 backend/drm: use atomic test-only commits for direct scan-out
This allows callers to use wlr_output_test to figure out whether a
buffer can be scanned out prior to committing the output.
2021-04-06 20:35:15 +02:00
Simon Ser 7efc2d05b7 backend/drm: downgrade test-only commit failure log level
Let's not clutter the logs with error messages when a test-only
atomic commit fails.
2021-04-06 20:35:15 +02:00
Simon Ser 5088e25eaf backend/drm: don't set NONBLOCK with TEST_ONLY
The kernel ignores NONBLOCK when TEST_ONLY is set. Let's just not
set it, to make it clear it's unused.
2021-04-06 20:35:15 +02:00
Simon Ser 6bfbf35618 backend/drm: reject DMA-BUFs with flags
We cannot scan-out DMA-BUFs with any flag right now.
2021-04-06 15:02:57 +02:00
Simon Ser 1ec97bdf4f backend/drm: improve logs in drm_fb_create
Downgrade errors to DEBUG level, because drm_fb_create is used in
test_buffer, so errors aren't always fatal. Add ERROR logs at call
sites where a failure is fatal, to make it clear something wrong
happened.
2021-04-06 14:57:59 +02:00
Simon Ser 511e42be5e backend/drm: try to import buffer when testing it
If the import to KMS succeeds, we have a better chance to be able to
scan it out.

Importing is also necessary for test-only commits, which we want to
add in the future.
2021-04-06 14:57:59 +02:00
Simon Ser 7709a965e5 backend/drm: use format table in test_buffer
Instead of an ad-hoc strip_alpha_channel function, use the
centralized format table to get an opaque substitute.
2021-03-31 17:29:31 +02:00
Simon Zeni c8b3536b01 backend/drm: use pixel format table in renderer 2021-03-25 10:55:54 +01:00
Simon Ser c740fccc9d Fix buffer blit matrices
There was a missing wlr_matrix_scale call, so we ended up with black
frames.

Closes: https://github.com/swaywm/wlroots/issues/2780
2021-03-16 17:57:51 +01:00
Simon Ser 44fa2c4b49 output: fix transform matrix for 90/270 rotations
We need to adjust the second translation depending on the transform
we applied.

Fixes: 9601a2abf0 ("output: improve transform matrix calculation"
Closes: https://github.com/swaywm/wlroots/issues/2774
2021-03-11 22:52:38 +01:00
Simon Zeni 9601a2abf0 output: improve transform matrix calculation
Compute only the transform matrix in the output. The projection matrix
will be calculated inside the gles2 renderer when we start rendering.

The goal is to help the pixman rendering process.
2021-03-10 15:33:36 +01:00
Simon Ser a02da8e6f6 backend/drm: add new writeback and SPI connector types
We already depend on libdrm 2.4.95, which is the first to have the
writeback connector type.
2021-03-05 17:59:26 +01:00
Simon Ser f3758d1d0a backend: add error messages in attach_render impls 2021-02-18 22:14:19 +01:00
Manuel Stoeckl a290d7a78d Make implementation function lists static const
This requires a change to the type of `struct wlr_tablet` and
`wlr_tablet_init` signature, both of which are part of the unstable API.
2021-02-05 10:04:20 +01:00
Simon Ser 73ffab70b0 backend/drm: don't blit in drm_fb_import
Instead blit in drm_plane_lock_surface. This makes drm_fb_import simpler
and better fits its name.
2021-01-24 18:33:56 +01:00
Simon Ser 4af85f4c19 backend/drm: simplify drm_fb_lock_surface
Make it take a plane instead, and rename to drm_plane_lock_surface.
2021-01-24 18:22:03 +01:00
Simon Ser 04d89a8bc5
backend/drm: fix modifiers for cursor plane buffers
In 93cd3a79b2 ("backend/drm: stop using GBM flags"), we stopped
using the GBM_BO_USE_LINEAR flag in favor of a modifier list set
to { DRM_FORMAT_MOD_LINEAR }. However, the last argument of
drm_plane_init_surface disables modifiers -- so the buffer will just
get allocated with an implicit modifier, without necessarily being
LINEAR.

To fix this, allow modifiers when allocating the cursor buffers.
wlr_drm_plane.formats should already have the necessary LINEAR
restrictions.

Fixes: 93cd3a79b2 ("backend/drm: stop using GBM flags")
2021-01-17 22:25:18 +01:00
Simon Ser f17b0f975d backend/drm: add wlr_drm_connector_get_id
This allows a compositor to get a KMS connector object ID from a
wlr_output. The compositor can then query more information about
the connector via libdrm.

This gives more freedom to compositors and allows them to read
KMS properties that wlroots doesn't know about. For instance,
they could read the EDID or the suggested_{X,Y} properties and
change their output configuration based on that.
2021-01-17 12:42:32 +01:00
Simon Ser cb6f584496 backend/drm: add support for the subconnector property
The subconnector property indicates the connector sub-type. This is
useful because that usually indicates what kind of connector the user
has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will
indicate a DVI subconnector. Also some laptops have non-DP connectors
that are internally linked to a DP port on the GPU.

Set the output description accordingly.

See https://drmdb.emersion.fr/properties/3233857728/subconnector
2021-01-17 12:42:25 +01:00
Simon Ser 9e98f497af backend/drm: use local DRM FD for wlr_rend
The new wlr_renderer_autocreate API is great for compositors, however
it causes some issues with DRM multi-GPU support.

A DRM child backend wants the compositor to use the parent GPU, so it
exposes the parent's DRM FD in get_drm_fd. However, in order to be able
to perform multi-GPU buffer copies, the child DRM backend still needs to
create a local renderer.

Use the new private wlr_renderer_autocreate_with_drm_fd function to
avoid creating a renderer for the parent GPU.

Fixes: e128e6c08d ("render: drop egl parameters from wlr_renderer_autocreate")
2021-01-16 22:52:26 +01:00
Simon Ser afdf4dc890 render/gles2: make EGL context current in bind_buffer
Instead of requiring callers to manually make the EGL context current
before binding a buffer and unsetting it after unbinding a buffer, do
it inside wlr_renderer_bind_buffer.

This hides renderer-specific implementation details inside the
wlr_renderer interface. Non-GLES2 renderers may not use EGL.
This removes all EGL dependencies from the backends.

References: https://github.com/swaywm/wlroots/issues/2618
References: https://github.com/swaywm/wlroots/pull/2615#issuecomment-756687006
2021-01-16 09:06:17 +01:00
Simon Zeni 08a4c62aac render: remove egl include from wlr_renderer 2021-01-16 08:57:42 +01:00
Simon Zeni e128e6c08d render: drop egl parameters from wlr_renderer_autocreate 2021-01-16 08:57:42 +01:00
Simon Ser b7c95d483a backend/drm: implement get_drm_fd 2021-01-16 08:57:42 +01:00
Simon Ser a6a0568316
backend: remove unnecessary GLES2 includes 2021-01-14 12:36:49 +01:00
Simon Ser dc61f471da
backend/drm: remove unnecessary wlr_drm_fb.wlr_buf check
We don't need this check, wlr_buf is guaranteed not to be NULL.
2021-01-13 19:01:02 +01:00
Simon Ser 5d054258af
backend/drm: fix segfault in page_flip_handler
Since 5b1b43c68c ("backend/drm: make wlr_drm_plane.{pending,queued,current}_fb
pointers"), current_fb can be NULL if there's no buffer. If current_fb
is not NULL, current_fb->wlr_buf is guaranteed to not be NULL.

Closes: https://github.com/swaywm/wlroots/issues/2634
2021-01-12 11:41:45 +01:00
Simon Ser 3f7e0cf5f0 render/egl: remove surface and buffer age args from make_current
These aren't used anymore.
2021-01-12 11:31:04 +01:00
Simon Ser c94728b53a
backend/drm: stop using surface size for BO
Stop using wlr_drm_surface.{width,height} to figure out the size of a
gbm_bo. In the future we'll stop using wlr_drm_plane.surf, so these will
be zero. Instead, rely on gbm_bo_get_{width,height}.
2021-01-10 11:24:44 +01:00
Simon Ser d9bbc416a6 backend/drm: re-use FBs
Instead of importing buffers to GBM and KMS at each frame, cache them
and re-use them while the wlr_buffer is alive.

This is the same as [1] and [2] but for the DRM backend.

[1]: https://github.com/swaywm/wlroots/pull/2538
[2]: https://github.com/swaywm/wlroots/pull/2539
2021-01-10 11:24:35 +01:00
Simon Ser 91cb0fc443 backend/drm: only keep track of local buffer
Stop keeping track of buffers on the parent GPU when multi-GPU is used.

This removes support for export_dmabuf on secondary GPUs, but renderer
v6 will bring this back by managing the swapchains in wlr_output instead
of the backends.
2021-01-10 11:24:35 +01:00
Simon Ser 5bd86b94f9 backend/drm: add wlr_drm_buf.local_wlr_buf 2021-01-10 11:24:35 +01:00
Simon Ser cd64610c66 backend/drm: introduce drm_fb_create 2021-01-10 11:24:35 +01:00
Simon Ser 5b1b43c68c backend/drm: make wlr_drm_plane.{pending,queued,current}_fb pointers
This will be useful once we start re-using wlr_drm_fb.
2021-01-10 11:24:35 +01:00