The DRM backend is a little special when it comes to wlr_outputs: the
wlr_drm_connectors are long-lived and are created even when no screen is
connected.
A wlr_drm_connector only advertises a wlr_output to the compositor when
a screen is connected. As such, most of wlr_output's state is invalid
when the connector is disconnected.
We want to stop using wlr_output state on disconnected connectors.
Introduce wlr_drm_connector.name which is always valid regardless of the
connector status to avoid reading wlr_output.name when disconnected.
Simplify and unify connector-specific logging with a new
wlr_drm_conn_log macro. This makes it easier to understand which
connector a failure is about, without having to explicitly integrate the
connector name in each log message.
gbm_bo_create_with_modifiers doesn't take GBM flags, so our
wlr_gbm_allocator interface doesn't either. We were still internally
using GBM flags in the DRM backend, leading to awkward back-and-forth
conversions.
The only flag passed to drm_plane_init_surface was GBM_BO_USE_LINEAR, so
turn that into a bool to make sure other flags can't be passed in.
Move the "force linear" logic out of init_drm_surface, because the
supplied wlr_drm_format should already contain that information.
Rename wlr_renderer_get_dmabuf_formats to
wlr_renderer_get_dmabuf_texture_formats. This makes it clear the formats
are only suitable for creating wlr_textures.
wlr_surface_send_enter now stores outputs that have been entered.
Combined with a new 'bind' event on wlr_output, this allows us to delay
enter events as necessary until the respective wl_output global has been
bound.
Closes: https://github.com/swaywm/wlroots/issues/2466
Wait for a DRM device if none is found in wlr_session_find_gpus. This
can happen if the compositor is loaded before the display kernel driver.
This supersedes the logind CanGraphical property.
To test, e.g. with i915 and sway:
rmmod -f i915
sway &
modprobe i915
Closes: https://github.com/swaywm/wlroots/issues/2093
Instead of operating on FDs in {open,close}_device, operate on
wlr_devices. This avoids the device lookup in wlr_session and allows
callers to have access to wlr_device fields.
For now, we use it to remove wlr_session_signal_add and replace it with
a more idiomatic wlr_session.events.change field. In the future, other
events will be added.
The swapchain maximum capacity is set to 4, so that we have enough room
for:
- A buffer currently displayed on screen
- A buffer queued for display (e.g. to KMS)
- A pending buffer that'll be queued next commit
- An additional pending buffer in case we want to invalidate the
currently pending one
Every host seat with pointer capability propagates events to one of
sub-pointer depending which output window we entered.
active_pointer tracks reference to sub-pointer on enter/leave events to
avoid lookup for it on every move events.
Fixesswaywm/wlroots#1499
We were previously exporting DMA-BUFs when receiving the capture_output
request, and sending a done event on wlr_output.events.precommit. Instead,
export and send done on wlr_output.events.commit.
The resource field of wlr_xdg_positioner is never initialized or
accessed within wlroots. The wl_resource for this interface is stored
in the wlr_xdg_positioner_resource struct.
This brings the layer-shell api in line with that of xdg-shell and
avoids reimplementing this function in every compositor in order to
render layer shell popups correctly.
This type is meant to be 4 bytes large as seen in _XcursorReadUInt which
always reads 4 bytes. An unsigned int is often 4 bytes large but this
isnt' guaranteed so it is cleaner to use the exact type we want.
This event contains a `committed` bitfield, which allows callers to know
which output fields changed during the commit.
This allows users to setup a single atomic commit listener, instead of
setting up one listener for each event (mode, scale, transform, and so
on).
References: https://github.com/swaywm/wlroots/issues/2098
These states are distinct in the time period between the ack_configure
and the next commit on the surface. Splitting these states avoids the
following race for example:
- client starts at 1000x1000
- wlr_xdg_toplevel_set_size 500x500
- size is different -> configure sent
- client acks the configure
- wlr_xdg_toplevel_set_size 1000x1000
- compare_xdg_toplevel_state returns true since there is no pending
configure and the currently committed size is still 1000x1000
- no new configure is sent
- client commits at the size it last acked, 500x500
Certain clients require this property to be set for expected behavior.
Most notably, steam client CSD maximize button no longer worked
after unmaximizing once, unless the state was changed by another
method. The state is unset whenever another surface gains focus.
The output backend API is now mostly state-less thanks to the atomic
hooks (commit and test). There is one exception though: attach_render.
This function makes the rendering context current. However sometimes the
compositor might decide not to render after attach_render (e.g. when
there's nothing new to render to the back buffer). Thus
wlr_output_rollback has been introduced to revert the pending state.
Because the output backend API is mostly state-less, the only thing
wlr_output_impl.rollback needs to do is revert the current rendering
context. Rename the function to rollback_render to make this clear. Add
a check in the common wlr_output code to only call rollback_render when
attach_buffer has been previously called.
On the long term, we'll be able to remove attach_render and
rollback_render together.
This commit makes `get_current_time_msec` correctly return milliseconds
as opposed to microseconds. It also considers the value of `tv_sec`, so
we don't lose occasionally go back in time by one second. Finally, the
function is moved into `util/time.cc` so that it can be reused elsewhere
without having to consider these pitfalls.
This is necessary for some grabs, which currently have no way of knowing
when the pointer/keyboard focus has left a surface. For example, without
this, a drag-and-drop grab can erroneously drop into a window that the
cursor is no longer over.
This is the plumbing needed to properly fix swaywm/sway#5220. The
existing fix, swaywm/sway#5222, relies on every grab's `enter()` hook
allowing a `NULL` surface. This is not guaranteed by the API and, in
fact, is not the case for the xdg-shell popup grab and results in a
crash when the cursor leaves a surface and does not immediately enter
another one while a popup is open (#2161).
This fix also adds an assertion to wlr_seat_pointer_notify_enter() that
ensures it's never called with a `NULL` surface. This will make Sway
crash much more until it fixes its usage of the API, so we should land
this at the same time as a fix in Sway (which I haven't posted yet).
I found the previous wording a bit confusing when I first read it.
Reword these comments to explicitly say that the grab-respecting
variants should be used in most cases.
This change has no functional effect.
These three APIs are very similar to one another, but they all had
slightly different function orderings. For consistency, always declare
the non_`notify` functions first, then the `notify` functions, then
`{start,end,has}_grab`.
This change has no functional effect.
This introduces the enter and leave events for wlr_keyboard_group.
The enter event is emitted when a keyboard is added to the group while a
key is pressed that is not pressed by any other keyboard in the group.
The data is a wl_array of the pressed key codes unique to the keyboard
that should now be considered pressed.
Similarly the leave event is emitted when a keyboard is removed from the
group while at least one key is pressed that is not pressed by any other
keyboard in the group. The data is a wl_array of the pressed key codes
unique to the keyboard that should now be considered released.
The purpose of these events are to allow the compositor to update its
state to avoid corruption. Additionally, for the leave event, the
focused surface may have been notified of a key press for some or all of
the key codes and needs to be notified of a key release to avoid state
corruption.
These were previously emitted as normal key events, but they are not
normal key events. There is no actual key press or release associated
with the events. It's purely for state keeping purposes. Emitting them
as separate events allows the compositor to handle them differently.
Since these are purely for state keeping purposes and are not associated
with an actual key being pressed or released, bindings should not be
triggered as a result of these events.
We should throw a protocol error if the relevant capability has never
existed when get_(pointer|keyboard|touch) is called. Otherwise, it
should succeed, even if the capability is not currently present.
This follows the spec, and avoids possible races with the client when
capabilities are lost.
Closes: https://github.com/swaywm/wlroots/issues/2227
Previously, we only had the pending state (crtc->pending, crtc->mode and
crtc->active). This causes issues when a commit fails: the pending state
is left as-is, and the next commit may read stale data from it.
This will also cause issues when implementing test-only commits: we need
to rollback the pending CRTC state after a test-only commit.
Introduce separate pending and current CRTC states. Properly update the
current state after a commit.
retry_pageflip is now dead code, since drm_connector_start_renderer
isn't called anymore. It was previously called when enabling an output.
The name "retry_pageflip" was a little confusing because the function
retried a modeset and the timer wasn't set up while performing a simple
page-flip.
Let's just remove this altogether for now. We can discuss whether it's
worth it to bring it back. Should we only do it on failed page-flips?
Should we only do it on EBUSY?
This function can be called after wlr_egl_make_current to cleanup the
EGL context. This avoids having lingering EGL contexts that make things
work by chance.
Closes: https://github.com/swaywm/wlroots/issues/2197
This is currently inconsistent with the rest of the library and a bit of
a footgun for new compositors. However, this breaks the API in a very
unfortunate way for existing compositors.
This is necessary so that sway can determine when to start emulating
pointer events -- it shouldn't start doing so during an implicit grab,
even if the pen is over a surface that doesn't bind tablet input.
Refs swaywm/sway#5302.
This patch will make the EGL renderer work on any EGL/GLESv2 driver
providing the EGL_WL_bind_wayland_display extensions.
Mesa used to declare provisional EGL_WL_bind_wayland_display directly
in <EGL/eglext.h>. Then, all unofficial extensions were moved to
<EGL/eglmesaext.h>, to have a cleaner implementation. See:
ab7bb10a2a
The extension was then approved at Khronos Group, and reached the
official <EGL/eglext.h>. See:
https://www.khronos.org/registry/EGL/extensions/WL/EGL_WL_bind_wayland_display.txtaa9b63f3ab
In order to make sure the renderer will work on any version of any
implementation providing the extension, only include the mesa-specific
header if it's present.
Signed-off-by: Julien Olivain <juju@cotds.org>
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.
This is also groundwork for supporting wlr_output_test properly.
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.
It's no guaranteed to exist though, so we still need to keep the
fallback.
