Commit Graph

1263 Commits

Author SHA1 Message Date
Simon Ser 7febdc7334 backend/wayland: re-use cursor wl_buffers
We were importing cursor buffers as wl_buffers over and over again.
Instead, only import these once.
2021-01-04 13:48:28 +01:00
Simon Ser adfb7cd35a backend/drm: stash pending page-flip CRTC
wlr_drm_connector.crtc may be updated by the DRM backend while a
page-flip is pending. In this case, the page-flip handler won't be able
to find the right wlr_drm_connector from the CRTC ID.

Save the CRTC when performing a page-flip to ensure we always find the
right connector when we get the event.
2021-01-03 19:35:02 +01:00
Simon Ser 576ff57db0 backend/drm: ignore hotplug events while inactive
When the session is inactive, we can't change the KMS state. Ignore
hotplug events so that compositors don't try to perform a modeset when
a connector is plugged in. We already re-scan connectors when the
session becomes active.

To test, run a wlroots compositor on VT 1, switch to VT 2, unplug a
connector, re-plug it, switch back to VT 1. Without this patch the
screen is black on VT 1.

References: https://github.com/swaywm/wlroots/issues/2370
2021-01-03 19:34:54 +01:00
Ilia Bozhinov eb30cde777 noop: listen to display destroy and destroy the backend 2020-12-31 20:34:36 +01:00
Simon Ser 4ffd537d2d
backend/x11: print version on extension error 2020-12-31 20:17:31 +01:00
Simon Ser 1491ec42da backend/x11: always open render node
If we get an authenticated primary node from the X11 server, don't use
it because we can't authenticate our Wayland clients with it. Instead,
open a render node.

Closes: https://github.com/swaywm/wlroots/issues/2576
2020-12-30 19:37:19 +01:00
Simon Ser 4b03bdc3ab Remove wlr_create_renderer_func_t
This callback allowed compositors to customize the EGL config used by
the renderer. However with renderer v6 EGL configs aren't used anymore.
Instead, buffers are allocated via GBM and GL FBOs are rendered to. So
customizing the EGL config is a no-op.
2020-12-30 17:09:40 +01:00
Simon Ser bec1e6b149 backend/drm: remove special linear case for cursor plane
We now properly mark the cursor plane's formats as linear-only, and we
now have a version of wlr_drm_format_intersect that handles the case of
linear-only formats and implicit modifiers.

We can remove the special drm_plane_init_surface flag we had for cursor
planes. This also allows us to use a non-linear layout for cursor planes
on drivers that support it.

Tested on amdgpu GFX9.
2020-12-30 11:17:43 +01:00
Simon Ser 92a0fc0435 backend/drm: extract linear format creation into function
Simplifies error handling.
2020-12-30 11:17:43 +01:00
Simon Ser 7ea0e9f277 backend/drm: force LINEAR for cursor plane formats
If the kernel driver doesn't support modifiers, it still expects cursor
FBs to have a LINEAR layout. See [1] for expectations for framebuffers
attached to the cursor plane.

[1]: https://patchwork.freedesktop.org/patch/408512/
2020-12-30 11:17:43 +01:00
Simon Ser caeed70f28 backend/x11: create per-window present event contexts
The Present protocol states:

> An event context is associated with a specific window; using an existing
> event context with a different window generates a Match error.

Instead of a global event context, use a per-window event context to fix
this error:

    [backend/x11/backend.c:608] X11 error: op Present (SelectInput), code Match (no extension), sequence 63, value 4194307

Closes: https://github.com/swaywm/wlroots/issues/2577
2020-12-28 16:57:56 +01:00
Ariadne Conill 23b6f3e3f5 drm: add fallback drmModeAddFB for drivers which do not support drmModeAddFB2
This makes wlroots able to run on some big-endian machines like G4 and
G5 systems with ATI Radeon 7500 AGP graphics.
2020-12-28 14:15:04 +01:00
Simon Ser c012d770f7 backend/x11: implement a real rendering loop
Instead of using a timer, rely on X11 Present events and send a new
frame event when the parent compositor displays a new frame on screen.

The previous attempt at doing this [1] hit issues with EGLSurface, but
we don't use that anymore.

[1]: https://github.com/swaywm/wlroots/pull/1894
2020-12-27 10:10:07 +01:00
Simon Ser c5f239f411
backend/drm: make listener names more idiomatic
Use the "<object>_<event>" notation for listeners, use
"handle_<listener>" for handlers.
2020-12-25 14:45:00 +01:00
Simon Ser b9460ab724
Stop using wlr_texture_get_size
Just use wlr_texture.{width,height} directly.
2020-12-25 12:21:29 +01:00
Simon Ser 17dd4c9e9a
backend/drm: use connector log helpers in atomic backend 2020-12-24 17:55:45 +01:00
Simon Ser a7a230ebef
backend/drm: make drmModePlane arg in add_plane const
Make it clearer it'll be free'd after add_plane returns.
2020-12-24 12:34:13 +01:00
Simon Ser c011a0e2ed
backend/drm: add special case for cursor in add_plane
The code calling add_plane now makes sure not to add a cursor plane to a
CRTC which already has one.
2020-12-24 12:31:20 +01:00
Simon Ser 5548406667
backend/drm: log whether ADDFB2 modifiers are supported 2020-12-24 12:29:30 +01:00
Simon Ser 64a2ca4dba
backend/drm: don't retry page-flip when modifiers are unsupported
Parse WLR_DRM_NO_MODIFIERS at startup. Don't parse IN_FORMATS when
WLR_DRM_NO_MODIFIERS is set, so that the legacy behaviour is better
reproduced.

When modifiers aren't supported, try the initial page-flip once only.
2020-12-23 19:49:27 +01:00
Simon Ser 54ec17ff64
backend/drm: use plural form for possible_crtcs
Make it clearer that this is a bitmask of CRTC indices.
2020-12-23 12:14:36 +01:00
Simon Ser 2de400a541
backend/drm: assert connector state after wlr_output_destroy 2020-12-22 19:53:33 +01:00
Simon Ser 85cf4b235d
backend/drm: destroy DRM connectors that disappear
This was lost during the refactoring. We were previously calling
wlr_output_destroy, which destroyed the connector as well.

Fixes: 248c7787c7 ("backend/drm: refactor wlr_output destruction")
2020-12-22 19:38:29 +01:00
Simon Ser ad4dae0844 backend/drm: error on size mismatch in drm_surface_blit 2020-12-22 15:53:10 +01:00
Simon Ser d3bcd63a40 backend/drm: remove drm_fb_acquire
Instead, import the buffer into GBM and KMS in drm_fb_import. Also move
the multi-GPU copy there if necessary.
2020-12-22 15:53:10 +01:00
Simon Ser 5ee8b12dc3 backend/drm: make drm_fb_acquire return a FB ID 2020-12-22 15:53:10 +01:00
Simon Ser d09abe86c1 backend/drm: drop export_drm_bo
Not used anymore.
2020-12-22 15:53:10 +01:00
Simon Ser dabd2e7207 backend/drm: grab DMA-BUF from wlr_buffer instead of gbm_bo
Get the DMA-BUF directly out of the wlr_buffer instead of relying on the
gbm_bo. This eliminates a roundtrip through GBM.
2020-12-22 15:53:10 +01:00
Simon Ser 83925f04c3 backend/drm: don't save texture in gbm_bo user data
The GBM BO is destroyed when released anyways.
2020-12-22 15:53:10 +01:00
Simon Ser 55b02f753f backend/x11: destroy buffers when destroying output 2020-12-21 16:31:07 +01:00
Simon Ser d6dbdd97e9 backend/x11: re-use pixmaps
Instead of re-importing a buffer each time we submit a frame, re-use the
pixmaps if possible.
2020-12-21 16:31:07 +01:00
Simon Ser defcd9b025 backend/wayland: re-use wl_buffers
Instead of re-importing a buffer each time we submit a new frame, re-use
the wl_buffer objects if possible.
2020-12-21 16:30:47 +01:00
Simon Ser de896caceb backend/wayland: remove EGL config
We don't use EGLSurface anymore, so we don't need to choose an EGL
config anymore.
2020-12-19 21:11:01 +01:00
Ronan Pigott 917ecca58e backend/drm: avoid gcc stringop-truncation warning 2020-12-18 22:19:16 +01:00
Simon Ser 352fdd1bb0
backend/drm: remove unused wlr_drm_plane.drm_format 2020-12-18 11:44:50 +01:00
Simon Ser 248c7787c7 backend/drm: refactor wlr_output destruction
Instead of hand-rolling our own manual wlr_output cleanup function, rely
on wlr_output_destroy to remove an output from the compositor's state.
2020-12-18 10:48:44 +01:00
Simon Ser 019ffe8a5b backend/drm: introduce wlr_drm_connector.name
The DRM backend is a little special when it comes to wlr_outputs: the
wlr_drm_connectors are long-lived and are created even when no screen is
connected.

A wlr_drm_connector only advertises a wlr_output to the compositor when
a screen is connected. As such, most of wlr_output's state is invalid
when the connector is disconnected.

We want to stop using wlr_output state on disconnected connectors.
Introduce wlr_drm_connector.name which is always valid regardless of the
connector status to avoid reading wlr_output.name when disconnected.
2020-12-18 10:48:44 +01:00
Simon Ser c89b131f29 backend/drm: introduce wlr_drm_conn_log
Simplify and unify connector-specific logging with a new
wlr_drm_conn_log macro. This makes it easier to understand which
connector a failure is about, without having to explicitly integrate the
connector name in each log message.
2020-12-18 10:48:44 +01:00
Simon Ser 0aefa18690 backend/x11: send more precise output present events
Instead of sending dummy output present events, use the X11 Present
extension to send more precise events.
2020-12-18 10:37:08 +01:00
Simon Ser 94fda895ac backend/x11: use DRI3Open to get DRM FD
Instead of relying on EGL to retrieve the DRM FD, query it from the
DRI3 extension.

Use the EGL GBM platform, and drop the EGL config.
2020-12-18 10:12:55 +01:00
Simon Ser 1e2c7fce86 backend/drm: use wlr_drm_format_{create,add}
Instead of manually allocating and initializing the structs, use the new
wlr_drm_format helpers.
2020-12-18 09:41:12 +01:00
Simon Ser 253f447329
backend/drm: print DRM device name when scanning connectors 2020-12-17 20:50:19 +01:00
Simon Ser 9cd3f03f65
backend/drm: add wlr_drm_backend.name
Save the DRM device name in a wlr_drm_backend field, so that we can
easily use it for logging purposes.
2020-12-17 20:48:47 +01:00
Simon Ser 60001a75a2
backend/drm: remove nouveau workaround
The workaround is broken because drm_fb_acquire doesn't leave the EGL
context current anymore. We'll need to re-introduce it.

References: https://github.com/swaywm/wlroots/issues/2525
2020-12-17 20:38:02 +01:00
Simon Ser 0dcdb5e7a1 backend/x11: fix DRI3 formats not used
We queried DRI3 formats, but we weren't using them. Because of a typo,
only render formats were used.

Fixes: c59aacf944 ("backend/x11: query modifiers supported by X11 server")
Closes: https://github.com/swaywm/wlroots/issues/2552
2020-12-17 17:02:09 +01:00
Simon Ser 0aa2ba0c03 backend/headless: select the rendering device ourselves
Backends will eventually stop creating their renderer. To prepare for
this, stop using EGL_PLATFORM_SURFACELESS_MESA in the headless renderer.
Pick a render node using libdrm.

The new allocator/renderer creation logic looks very much like what will
end up in common code.
2020-12-16 12:12:36 +01:00
Simon Ser da2a216934
backend/drm: add wlr_drm_connector.backend
This allows the DRM code to have direct access to the wlr_drm_backend
without having to go through an upcast via get_drm_backend_from_backend.
2020-12-15 22:56:14 +01:00
Simon Ser 87bd718de5
backend: use fcntl(F_DUPFD_CLOEXEC) instead of dup
This makes sure the CLOEXEC flag is set on the dup'ed FD.
2020-12-15 20:52:53 +01:00
Simon Ser 1ca4d6b029
backend/drm: dup FD before wlr_gbm_allocator_create
The GBM allocator takes ownership of the DRM FD.
2020-12-15 20:50:04 +01:00
Simon Ser e57a52e7f7
Remove inline keyword
The compiler is smarter at figuring out whether a function should be
inlined or not.
2020-12-15 13:49:42 +01:00
Simon Ser 93cd3a79b2 backend/drm: stop using GBM flags
gbm_bo_create_with_modifiers doesn't take GBM flags, so our
wlr_gbm_allocator interface doesn't either. We were still internally
using GBM flags in the DRM backend, leading to awkward back-and-forth
conversions.

The only flag passed to drm_plane_init_surface was GBM_BO_USE_LINEAR, so
turn that into a bool to make sure other flags can't be passed in.

Move the "force linear" logic out of init_drm_surface, because the
supplied wlr_drm_format should already contain that information.
2020-12-13 13:20:39 +01:00
Simon Ser 525fa6ada0
backend/x11: fix xinput mask mixed up with present
Don't mix xinput and present flags.

Fixes: d79a00bf02 ("backend/x11: switch to wlr_swapchain")
2020-12-13 12:21:21 +01:00
Simon Ser c59aacf944 backend/x11: query modifiers supported by X11 server 2020-12-13 12:16:52 +01:00
Simon Ser d79a00bf02 backend/x11: switch to wlr_swapchain 2020-12-13 12:16:52 +01:00
Simon Ser 16a51bbab2 backend/wayland: query render formats 2020-12-13 12:16:28 +01:00
Simon Ser 441bac139f backend/wayland: use wlr_swapchain for cursor surface 2020-12-13 12:16:28 +01:00
Simon Ser 3923ff005d backend/wayland: use wlr_swapchain for main surface
The cursor surface still uses a wl_egl_window.

References: https://github.com/swaywm/wlroots/issues/1352
2020-12-13 12:16:28 +01:00
Simon Ser 038285d496 backend/wayland: stop rendering black frame on init
Instead of rendering a black frame, schedule a frame event to ask the
compositor to render a proper frame.
2020-12-13 12:16:28 +01:00
Simon Ser 768131e488 output: stop assuming a frame is pending in init
- The DRM backend initially doesn't have a frame scheduled initially.
  However the compositor is expected to set a mode to start the
  rendering loop (frame_pending is set to true in drm_crtc_pageflip).
- The headless and X11 backends have a timer to schedule frames, so they
  ignore this hint completely.
- The Wayland backend renders a fake frame to start the rendering loop.
  It's the only case where a frame is pending on init, move the
  assumption there.
2020-12-13 12:16:28 +01:00
Simon Ser 4c363a564f backend/drm: remove workaround for amdgpu DP MST
Closes: https://github.com/swaywm/wlroots/issues/2533
2020-12-11 23:27:13 +01:00
Simon Ser 6ff478632a backend/drm: remove EGL config
Since we're using wlr_swapchain, we don't need to provide an EGL config.
2020-12-09 14:25:41 +01:00
Simon Ser 06ab41a160
backend/drm: fix missing wlr_drm_format.cap
This caused issues with wlr_drm_format_dup.
2020-12-08 23:32:04 +01:00
Simon Ser eb5886ddbe backend/headless: add support for direct scan-out
I was about to add a check to fail instead of crash when the compositor
uses direct scan-out, but with renderer v6 it's so simple to just add
support for direct scan-out, why bother?

Closes: https://github.com/swaywm/wlroots/issues/2523
2020-12-08 18:57:11 +01:00
Stephane Chauveau b790e5ea34 backend/drm: don't assume possible_crtcs has only one bit set
This isn't necessarily the case [1].

This should fix an assertion failure on Raspberry Pi 4 dual screen.

[1]: https://lists.freedesktop.org/archives/dri-devel/2020-August/275142.html

Closes: https://github.com/swaywm/wlroots/issues/1943
Co-authored-by: Simon Ser <contact@emersion.fr>
2020-12-08 18:38:42 +01:00
Simon Ser 863acb26c0 backend/drm: stop tracking overlay planes
We don't do anything with them. Once we do, we can easily add this back.
2020-12-08 18:38:42 +01:00
Simon Ser e69bbfd0d6 backend/drm: unset current surface before importing
drm_fb_import_wlr may need to change the current EGL context. For
instance by calling drm_fb_clear, which calls wlr_buffer_unlock, which
may destroy a buffer if the cursor swapchain size has changed, which
calls gles2's destroy_buffer, which calls glDeleteFramebuffers.

Closes: https://github.com/swaywm/wlroots/issues/2479
2020-12-08 00:10:57 +01:00
Simon Ser 325cba6414
backend/drm: use EGL_PLATFORM_GBM_KHR
This is just the vendor-agnostic define for the GBM platform. It has the
same value as EGL_PLATFORM_GBM_MESA, so should work with old drivers
that only offer the Mesa-vendored extension too.
2020-12-07 12:06:38 +01:00
Simon Ser bfb59fd4d7 backend/headless: create a config-less EGL context 2020-12-07 11:40:45 +01:00
Ilia Bozhinov 54b7ca56c0 drm: do not unset make/model before emitting destroy event 2020-12-07 10:39:29 +01:00
Simon Ser 90c8452959 backend/session/libseat: set XDG_SESSION_TYPE
libseat will call logind's SetType method if necessary.
2020-12-05 00:14:04 +01:00
Simon Ser 1336ad2a23
backend/drm: remove unused if in drm_connector_move_cursor
We return early if we don't have a plane.
2020-12-04 19:34:35 +01:00
Simon Ser 0e927533b0 backend/drm: query render formats
On some platforms it's possible that the display engine supports
modifiers not supported by the render engine.

Query render formats and intersect them with plane formats to accommodate
for this.
2020-12-03 10:52:25 +01:00
Simon Ser 237c2cf2fb backend/drm: take a wlr_drm_format in init_drm_surface
Instead of taking a format code and wlr_drm_format_set, simplify the
function signature and take a single wlr_drm_format.
2020-12-03 10:52:25 +01:00
Simon Ser 8bc5a92a98 Revert "backend/drm: stop force-probing connectors"
This reverts commit 713c1661b7.

It turns out we do need to force-probe on startup and on hotplug [1].
This is unfortunate, but that's just how the uAPI works. Fixing this
would require patching the kernel.

[1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/289506.html

Closes: https://github.com/swaywm/wlroots/issues/2499
2020-12-01 11:31:03 +01:00
Simon Ser de9ff46629
backend/drm: "scaling mode" is a connector property
It's not a CRTC property. Remove it altogether since it's unused.
2020-11-30 11:57:08 +01:00
Simon Ser 2649600fa1
backend/drm: rotation is a plane property
"rotation" is a plane property, it's not a CRTC property. It was also
missing from plane_info.
2020-11-30 11:57:08 +01:00
Simon Ser c045253927 backend/headless: use a format suitable for rendering
When allocating buffers, use a format suitable for rendering. This
avoids picking a format that won't work.
2020-11-30 11:08:44 +01:00
Simon Ser 6485fadc16
backend/wayland: don't set EGL visual
The Wayland platform doesn't have visuals. By chance,
WL_SHM_FORMAT_ARGB8888 is zero, which means egl_get_config was ignoring
it and everything worked fine.
2020-11-25 13:52:05 +01:00
Simon Ser 713c1661b7 backend/drm: stop force-probing connectors
After discussing with Pekka and Daniel on #dri-devel, we concluded [1]
that user-space shouldn't need to force-probe connectors. Force-probing
can take some time, so using drmModeGetConnectorCurrent can result in
faster start-up.

Users can manually trigger a force-probe if necessary:

    echo detect | sudo tee /sys/class/drm/card0-DP-1/status

Or just by running a tool like drm_info.

A similar change has been submitted to Weston [2].

[1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/287728.html
[2]: https://gitlab.freedesktop.org/wayland/weston/-/issues/437
2020-11-24 15:00:46 +01:00
Simon Ser 154fe8696f backend/x11: log unhandled client messages 2020-11-24 14:57:25 +01:00
Simon Ser f6c36f8881 backend/x11: log unhandled X11 events 2020-11-24 14:57:25 +01:00
Simon Ser 52805feae9 backend/x11: log errors
Register an X11 error handler, and optionally use xcb-errors to print a
detailed message.
2020-11-24 14:57:25 +01:00
Isaac Freund 262740bc9a backend/libseat: fix change_vt return value
This should return true on success and false on failure not vice-versa.
2020-11-24 13:09:13 +01:00
Simon Ser 754179dacd backend/session: add a timeout waiting for GPUs
If a GPU doesn't show up in 10s, bail out and return zero GPUs.
2020-11-19 22:47:49 +01:00
Simon Ser c491a21d25 backend/session/logind: log when using XDG_SESSION_ID
This makes it easier to figure out how wlroots selected the session.
2020-11-19 22:47:49 +01:00
Simon Ser 0e76f92de7 backend/session: replace session_signal with events.active
This is more idiomatic wlroots API. The new name makes it clear that the
signal is emitted when wlr_session.active changes.
2020-11-19 22:47:49 +01:00
Simon Ser cd95d70df0 Revert "session/logind: support CanGraphical property"
We now use udev to wait for DRM card devices.

This reverts commit 3ebf079a9a.
2020-11-19 22:47:49 +01:00
Simon Ser fbf11a41e1 backend/session: wait for DRM device if none found
Wait for a DRM device if none is found in wlr_session_find_gpus. This
can happen if the compositor is loaded before the display kernel driver.

This supersedes the logind CanGraphical property.

To test, e.g. with i915 and sway:

    rmmod -f i915
    sway &
    modprobe i915

Closes: https://github.com/swaywm/wlroots/issues/2093
2020-11-19 22:47:49 +01:00
Simon Ser 76bcddf071 backend/session: introduce wlr_session.events.add_drm_card
This is triggered when a new DRM card is added.

An easy way to test this patch is `modprobe vkms`.
2020-11-19 22:47:49 +01:00
Simon Ser 768fbaad54 backend/session: filter udev events by sysname
We're only interested in card devices. The loop over wlr_session.devices
would take care of ignoring non-card events, but a future patch will
listen to udev "add" events as well.
2020-11-19 22:47:49 +01:00
Simon Ser 44a4792fd8 backend/session: operate on wlr_device
Instead of operating on FDs in {open,close}_device, operate on
wlr_devices. This avoids the device lookup in wlr_session and allows
callers to have access to wlr_device fields.

For now, we use it to remove wlr_session_signal_add and replace it with
a more idiomatic wlr_session.events.change field. In the future, other
events will be added.
2020-11-19 22:47:49 +01:00
Simon Ser 63df2bcbe6 backend/session: don't return FD on failure in open_file
When wlr_session_open_file fails, don't return the FD, otherwise the
caller will think the call succeeded.
2020-11-19 22:47:49 +01:00
Kenny Levinsen fb3bea8014 backend/drm: Use legacy gamma size for legacy backend
We would always return the GAMMA_LUT_SIZE property if available, and
only fall back to legacy gamma size otherwise. This leads to issues if
both are available in differs in size while we use the legacy backend.

Ensure that we only return the legacy size if we're using the legacy
backend.

Closes: https://github.com/swaywm/wlroots/issues/2429
2020-11-19 22:46:25 +01:00
Simon Ser 02df7b7ac8 backend/headless: implement export_dmabuf 2020-11-15 22:54:07 +01:00
Simon Ser 61f8cdfb9e backend/headless: switch to wlr_swapchain 2020-11-15 22:54:07 +01:00
Simon Ser eef8b3dde8 backend/drm: check drm_surface_render_black_frame return value
This avoids hitting an assertion in drm_fb_lock_surface when
we failed to render a black frame.
2020-11-15 22:48:42 +01:00
Simon Ser c881008e1c backend/drm: add support for wlr_swapchain multi-GPU 2020-11-15 22:48:42 +01:00
Simon Ser 8058e338ea backend/drm: get rid of wlr_drm_fb_type
Since all DRM FBs are backed by a wlr_buffer, there's no need for this
anymore.
2020-11-15 22:48:42 +01:00
Simon Ser 68a8d99055 backend/drm: add support for wlr_swapchain buffer age 2020-11-15 22:48:42 +01:00
Simon Ser ef846a8839 backend/drm: use wlr_swapchain 2020-11-15 22:48:42 +01:00
Simon Ser aaa3fcf66f
backend/libinput: require libinput 1.14
We have the policy of requiring up-to-date dependencies instead of
adding conditionals for older versions. libinput 1.14 was published more
than 1 year ago.
2020-11-15 18:57:16 +01:00
Mykola Orliuk 2eae9ec7c8 backend/wayland: Set cursor indivdualy per output 2020-11-12 12:31:32 +01:00
Mykola Orliuk 44531e16e0 backend/wayland: Add active pointer per host seat
Every host seat with pointer capability propagates events to one of
sub-pointer depending which output window we entered.
active_pointer tracks reference to sub-pointer on enter/leave events to
avoid lookup for it on every move events.

Fixes swaywm/wlroots#1499
2020-11-12 12:31:32 +01:00
Mykola Orliuk ce8855ca2a backend/wayland: Bind pointer listener to seat 2020-11-12 12:31:32 +01:00
Mykola Orliuk 07e2e0f60c backend/wayland: Listen to pointers from all seats
This effectively gets swaywm/wlroots#1499 to the point where
functionality somewhat preserved and no crash happens.
We still can have only one cursor, but we can control it from multiple
seats in time-sharing manner by entering/leaving output.
2020-11-12 12:31:32 +01:00
Mykola Orliuk 44c4773d58 backend/wayland: Use seat name in input names 2020-11-12 12:31:32 +01:00
Mykola Orliuk 70ffda3ea3 backend/wayland: Add registering multiple seats 2020-11-12 12:31:32 +01:00
Mykola Orliuk 85b0872650 backend/wayland: Link input devices with seats 2020-11-12 12:31:32 +01:00
Mykola Orliuk 40bfd9f8f7 backend/wayland: Bind seat listener to wlr_wl_seat 2020-11-12 12:31:32 +01:00
Isaac Freund e06c9e43af Remove unneeded includes from wlr_input_device.h
This uncovered many places where we were using things without directly
including them.
2020-11-11 15:40:47 +01:00
Isaac Freund 7693f61d81 Replace wlr_key_state with wl_keyboard_key_state
There's no reason to have duplicate enums
2020-11-11 10:58:38 +01:00
Simon Ser 1328477a82 backend/drm: export pending FB in export_dmabuf, if any
This allows callers to grab the current frame right after committing it,
without having to incur a full vblank worth of latency.
2020-11-05 09:43:42 +01:00
Simon Ser ee43ef3c9d backend/drm: fix "a page-flip is already pending" errors on modeset
When performing a modeset, the DRM backend will request a page-flip
event. However frame_pending wasn't set to true, so any subsequent
wlr_output_schedule_frame calls would imemdiately trigger a synthetic
frame event, asking the compositor to submit a new frame. Committing the
new frame fails with "a page-flip is already pending" error in the DRM
backend.
2020-11-03 08:09:54 +01:00
Marten Ringwelski 85757665e6 backend/drm: Check if output is enabled before sending frame event
When an output is disabled one last pageflip will happen to disable it.
Currently this pageflip causes a frame event.
Since the output is disabled we don't want to send this frame event.
2020-10-30 10:04:54 +01:00
Mykola Orliuk 31aa7f4c95 backend/wayland: fix some keyboard/touch leaks 2020-10-18 21:25:25 +02:00
Mykola Orliuk 009cd634a2 backend/wayland: fix input creation error handling 2020-10-18 21:25:25 +02:00
Mykola Orliuk 41bf1c6871 backend/wayland: add error flow in create_wl_seat 2020-10-18 21:25:25 +02:00
Mykola Orliuk 1ac5257357 backend/wayland: factor out wlr_wl_seat 2020-10-18 16:28:12 +02:00
Mykola Orliuk df417b7e95 backend/wayland: manage cursor for current pointer 2020-10-18 16:28:12 +02:00
Ilia Bozhinov b98522b38f
backend/wayland: add touch support to the wayland backend
Goal currently is to get support working for a single output, thus there is only one touch device created.

Multi-output support is left for later.
2020-10-18 15:33:03 +02:00
Simon Ser 45c1a3621c backend/libinput: improve logger callback
- Add a prefix to make it clear log messages come from libinput
- Properly convert libinput log priority to wlroots'
2020-10-10 10:51:32 -04:00
Simon Ser 87836dcb55 backend: remove check for _WAYLAND_DISPLAY
I'm not sure what this was used for, but it's not used by libwayland.
Setting _WAYLAND_DISPLAY would result in the Wayland backend being
picked but would ignore the actual value of the env variable.
2020-09-16 15:53:14 -04:00
nerdopolis e44bed0c2b Accommodate for CONFIG_VT=0, all TTYs are in seat0, but not all
seat0s have TTYs
2020-09-04 11:46:54 +02:00
Patrick Steinhardt fa05d3cde6 session: Don't refuse unprivileged creation of "direct" backend
When starting a compositor that's using the "direct" session backend,
wlroots needs to handle calls to `drmSetMaster()` and `drmDropMaster()`.
As both calls used to require `CAP_SYS_ADMIN`, wlroots thus simply
refused starting in case the process doesn't enjoy evelated privileges.

Permission rules have changed since linux.git commit 45bc3d26c95a (drm:
rework SET_MASTER and DROP_MASTER perm handling, 2020-03-19). As a
result, starting with Linux v5.8, both ioctls will now also succeed if
the process is currently or has been the DRM master. And as the first
process to open render nodes will become the DRM master automatically,
this effectively means that process elevation is not strictly required
in all setups anymore.

So let's drop the `geteuid() != 0` permission check to allow those new
rules to do their magic.
2020-09-04 11:39:25 +02:00
Ilia Bozhinov efe6414640 wayland: emit relative pointer events only for current pointer 2020-09-04 10:13:35 +02:00
Ryan Walklin 28cedb5623 Quieten failure to set login session type
(almost certainly due to systemd version <246)
2020-09-02 11:35:32 +02:00
Simon Ser 971de474f0 backend/session/libseat: register log handler
Route libseat errors through wlroots logging infrastructure.

This requires libseat 0.2.0.
2020-09-01 12:09:25 +02:00
Kenny Levinsen 330c50b48d session: Add missing init to direct-freebsd
bad1e9afa8 ("session: Add libseat backend") introduced a change to to
how session backends initialize, but failed to update the FreeBSD
specific version of the direct backend accordingly.

Closes: https://github.com/swaywm/wlroots/issues/2376
2020-08-26 22:56:54 +02:00
Simon Ser 297354f847 Remove unnecessary wl_display_dispatch calls
wl_display_roundtrip already takes care of dispatching the display.
2020-08-24 07:55:35 -06:00
Kenny Levinsen bad1e9afa8 session: Add libseat backend 2020-08-24 11:13:55 +02:00
Ilia Bozhinov 9feeb2738d
backend/wayland: destroy relative pointer when output is disconnected
Fixes #2243
Fixes #2106
2020-08-17 11:33:57 +02:00
Ryan Walklin 7e990a2991 Don't set XDG_SESSION_TYPE unless logind SetType succeeds 2020-08-07 19:15:25 +02:00
Ryan Walklin e81d2086c0 Also set XDG_SESSION_TYPE 2020-08-07 19:15:25 +02:00
Ryan Walklin f0d03fb892 Implement logind session SetType method to change session type to wayland 2020-08-07 19:15:25 +02:00
Devin J. Pohly aaf490d794 drm: fix uninitialized read
get_drm_prop_blob does not set path_len if it returns NULL.  Check the
return value before path_len to avoid reading uninitialized memory.

(Granted, this doesn't change the logic at all, but it does make
Valgrind a bit happier.)
2020-07-31 09:32:14 +02:00
Antonin Décimo d9bb792794 Fix incorrect format parameters 2020-07-27 10:49:19 +02:00
Simon Ser b6377b59ff backend/drm: check drm_surface_make_current return value
drm_connector_set_cursor wasn't checking the return value of the
drm_surface_make_current call. On failure, this results in a failed
assertion in wlr_renderer_begin (because no rendering context is
current).
2020-07-07 11:18:07 -06:00
Simon Ser cccca368c5
backend/drm: fix typo in drm_surface_make_current arg 2020-07-07 17:36:51 +02:00
Simon Ser f82a27f55a backend/drm: fix DPMS on legacy interface
This mirrors what the atomic code does in create_mode_blob.

Closes: https://github.com/swaywm/wlroots/issues/2312
2020-07-02 09:39:41 -06:00
Simon Ser c930160286 backend/noop: add missing rollback_render output impl
3c5dbfd97c ("output: make rollback_render mandatory") makes a no-op
output init fail without this function.
2020-06-19 13:07:24 -06:00
Simon Ser bf93d2e67c output: rename impl->rollback to rollback_render
The output backend API is now mostly state-less thanks to the atomic
hooks (commit and test). There is one exception though: attach_render.
This function makes the rendering context current. However sometimes the
compositor might decide not to render after attach_render (e.g. when
there's nothing new to render to the back buffer). Thus
wlr_output_rollback has been introduced to revert the pending state.

Because the output backend API is mostly state-less, the only thing
wlr_output_impl.rollback needs to do is revert the current rendering
context. Rename the function to rollback_render to make this clear. Add
a check in the common wlr_output code to only call rollback_render when
attach_buffer has been previously called.

On the long term, we'll be able to remove attach_render and
rollback_render together.
2020-06-19 11:50:42 -06:00
Andri Yngvason a6a5a19356 backend: drm: Fix dmabuf resource leak 2020-06-13 15:39:49 +02:00
Simon Ser e77c046cf9 backend/drm: fix stack overflow in dealloc_crtc
Call drm_crtc_commit directly instead of calling drm_connector_set_mode.
This restores the previous behaviour where conn_enable was called [1].

[1]: 0c7c562482/backend/drm/drm.c (L1093)

Closes: https://github.com/swaywm/wlroots/issues/2253
2020-06-08 10:13:00 -06:00
Tudor Brindus dc13bb827d util: fix and move `get_current_time_msec` into a util file
This commit makes `get_current_time_msec` correctly return milliseconds
as opposed to microseconds. It also considers the value of `tv_sec`, so
we don't lose occasionally go back in time by one second. Finally, the
function is moved into `util/time.cc` so that it can be reused elsewhere
without having to consider these pitfalls.
2020-06-06 00:09:19 +02:00
Simon Ser 8f28f5b2f8 backend/drm: fix black screens when enabling output
This patch fixes this failure:

    01:57:16.642 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
    01:57:16.684 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
    01:57:16.684 [ERROR] [backend/drm/drm.c:732] Failed to initialize renderer on connector 'eDP-1': initial page-flip failed
    01:57:16.684 [ERROR] [backend/drm/drm.c:805] Failed to initialize renderer for plane
    01:57:16.684 [sway/config/output.c:423] Failed to commit output eDP-1

References: https://github.com/swaywm/sway/issues/5101
2020-06-03 10:27:21 -06:00
Simon Ser 019fe8bb7e backend/wayland: fix spurious eglSwapBuffers failures
This was introduced in [1]. However after reverting that PR I still
can't reproduce the bug the PR aimed to fix [2].

Since there's no good explanation why we would need to swap buffers
before resizing, let's just revert the PR.

[1]: https://github.com/swaywm/wlroots/pull/1486
[2]: https://github.com/swaywm/wlroots/issues/1371

Closes: https://github.com/swaywm/wlroots/issues/1768
2020-06-02 14:14:08 -06:00
Tudor Brindus 47a30957d1 backend/wayland: scale tablet tool position into [0, 1] range
Fixes #2233.
2020-06-01 22:36:46 +02:00
Simon Ser b03eebf7d4 backend/drm: always perform a CRTC commit in drm_connector_commit
When the mode, status or buffer hasn't changed, drm_connector_commit was
a no-op. Because of this individual changes to the gamma LUT or adaptive
sync status were ignored (if committed without a buffer).

Instead, perform a commit to apply the changes.
2020-06-01 11:45:11 -06:00
Simon Ser 1a2e82e327 backend/drm: drop extra wlr_output_update_enabled call
drm_connector_set_mode already takes care of keeping this up-to-date.
2020-06-01 11:45:11 -06:00
Simon Ser 80467f6ae8 backend/drm: commit/rollback FBs in drm_crtc_commit
We need to perform the FB bookkeeping on all commits, not just on
page-flips.
2020-06-01 11:45:11 -06:00
Simon Ser 70f3a0bb27 backend/drm: make adaptive_sync atomic
Stop using drmModeObjectSetProperty, set the property in the crtc_commit
function instead.
2020-06-01 11:45:11 -06:00
Simon Ser 42126c2022 backend/drm: rollback pending CRTC state on test commit
A test commit doesn't apply the pending state.

The CRTC state will be populated again if the compositor decides to
perform a regular commit afterwards.
2020-06-01 11:45:11 -06:00
Simon Ser 1a23c1425f Add comments for missing tablet tool entries
And stop using default cases, so that we know which parts of the code
need an update when adding a new enum entry.

Closes: https://github.com/swaywm/wlroots/issues/2208
2020-05-28 15:13:05 +02:00
Simon Ser d66b9966e9 backend/drm: fix missing crtc->cursor NULL check
Fixes: cdb6fdbc6c ("backend/drm: remove missing cursor plane workaround")
2020-05-27 21:01:20 +02:00
Simon Ser e7a8ea84c3 backend/drm: don't set cursor if off-screen
Closes: https://github.com/swaywm/wlroots/issues/2216
2020-05-27 21:01:20 +02:00
Simon Ser 15d8f1806e backend/drm: introduce pending and current CRTC state
Previously, we only had the pending state (crtc->pending, crtc->mode and
crtc->active). This causes issues when a commit fails: the pending state
is left as-is, and the next commit may read stale data from it.

This will also cause issues when implementing test-only commits: we need
to rollback the pending CRTC state after a test-only commit.

Introduce separate pending and current CRTC states. Properly update the
current state after a commit.
2020-05-26 23:34:37 +02:00
Simon Ser d6cc718472 backend/drm: nuke retry_pageflip
retry_pageflip is now dead code, since drm_connector_start_renderer
isn't called anymore. It was previously called when enabling an output.
The name "retry_pageflip" was a little confusing because the function
retried a modeset and the timer wasn't set up while performing a simple
page-flip.

Let's just remove this altogether for now. We can discuss whether it's
worth it to bring it back. Should we only do it on failed page-flips?
Should we only do it on EBUSY?
2020-05-26 23:34:37 +02:00
Simon Ser 61095f4a12 backend/drm: make drm_connector_set_mode take a wlr_drm_connector
Since this is an internal DRM backend function, there's no reason we
need to take a generic wlr_output.
2020-05-26 23:34:37 +02:00
Simon Ser 445750aa9a backend/drm: remove enable_drm_connector
Merge enable_drm_connector into drm_connector_set_mode. This allows us
to de-duplicate logic since enabling an output performs a modeset.
2020-05-26 23:34:37 +02:00
Simon Ser c02e9c2bb1 backend/drm: remove drm_connector_set_custom_mode
Replace it with a function that returns the pending mode.
2020-05-26 23:34:37 +02:00
Simon Ser 21c6cc5e4c backend/drm: refuse to enable an output without a mode 2020-05-26 20:10:55 +02:00
Simon Ser 47e5212823 backend/drm: rollback atomic blobs
If the atomic commit fails or is test-only, rollback
wlr_drm_crtc.{mode_id,gamma_lut} blob IDs to their previous value. This
prevents the next commits from failing or applying test-only state.
2020-05-26 20:01:38 +02:00
Simon Ser af2f69e6c1 render/egl: unset current context after swapping buffers
After swapping buffers, it doesn't make sense to perform more rendering
operations. Unset the context to reflect this.

This commit makes it so the context is always only current between
wlr_egl_make_current and wlr_egl_swap_buffers.

This is an alternative to [1].

[1]: https://github.com/swaywm/wlroots/pull/2212
2020-05-20 17:39:34 +02:00
Simon Ser d28a7da95d backend/drm: add missing wlr_egl_unset_current 2020-05-19 21:32:38 +02:00
Simon Ser cfed5766b7 backend/drm: fix current EGL context on multi-GPU
get_tex_for_bo changes the current EGL context. Rendering operations
must immediately follow drm_surface_make_current.

Closes: https://github.com/swaywm/wlroots/issues/2209
2020-05-19 21:32:38 +02:00
Simon Ser 1edc42157b render/egl: introduce wlr_egl_unset_current
This function can be called after wlr_egl_make_current to cleanup the
EGL context. This avoids having lingering EGL contexts that make things
work by chance.

Closes: https://github.com/swaywm/wlroots/issues/2197
2020-05-19 14:56:20 +02:00
Simon Ser 781ed1ff02 Fix -Wreturn-type warnings
When calling assert(0) instead of returning a value, -Wreturn-type
warnings are triggered because assertions can be disabled. Replace these
assertions with abort().
2020-05-19 14:54:02 +02:00
Simon Ser 2988ebb6f3 backend/drm: fix atomic commits when the GAMMA_LUT prop is missing
We already have the logic to fallback to the legacy interface above. We
just need to avoid calling atomic_add with a zero prop ID.

Closes: https://github.com/swaywm/wlroots/issues/2187
2020-05-14 23:55:43 +00:00
Simon Ser 347bdb6d9a output: make wlr_output_set_gamma atomic
wlr_output_set_gamma is now double-buffered and applies the gamma LUT on
the next output commit.
2020-05-14 20:09:28 +02:00
Simon Ser 42e485dcc3 backend/drm: fix segfault in drm_crtc_page_flip
When no cursor plane is available, drm_crtc_page_flip would segfault.
2020-05-14 10:20:37 +02:00
Simon Ser 51bbf31742 backend/drm: print error in set_plane_props
This makes it easier to understand which plane failed.
2020-05-12 15:12:22 +02:00
Simon Ser 9412d34e2d backend/drm: disable cursor in dealloc_crtc
dealloc_crtc was destroying GBM surfaces, but the cursor_enabled flag
was left as-is. When re-enabling the output, atomic_crtc_pageflip would
try enabling the cursor plane, but would fail because no framebuffer is
available.

Closes: https://github.com/swaywm/wlroots/issues/2150
2020-05-12 15:12:22 +02:00
Simon Ser da4df82532 backend/drm: fix combined modeset+enable commits
When an output is enabled and modeset at the same time,
drm_connector_commit would first try to modeset then try to commit. This
won't work because both will trigger a page-flip. KMS will reject that.

Change the logic to only enable an output if no modeset has been
requested. The logic in wlr_output already checks that the user isn't
doing a modeset and disabling the output at the same time.
2020-05-12 15:12:06 +02:00
Simon Ser cdb6fdbc6c backend/drm: remove missing cursor plane workaround
We have a workaround for legacy drivers that support drmModeSetCursor
without exposing a cursor plane. It doesn't work anymore now that we've
moved to a more atomic interface.

Let's just remove this workaround and fallback to software cursors.

Closes: https://github.com/swaywm/wlroots/issues/2166
2020-05-12 08:57:13 +02:00
JonnyMako 1139234117
backend/drm: fix missing cursor on external monitors with multi-GPU setup and nouveau
We need to make the multi-GPU surface current before the glFinish call.

Closes: https://github.com/swaywm/sway/issues/5319
2020-05-11 08:51:41 +02:00
Simon Ser f72686c0b6 backend/drm: fix crash in session_signal
conn->crtc is NULL in case the output is disabled.

However, the DRM backend will set the GAMMA_LUT property anyway. On each
commit the whole state is sent to KMS. Adding WLR_DRM_CRTC_GAMMA_LUT to
the pending state would just make the backend re-create the blob
containing the gamma LUT.
2020-05-10 12:07:05 +02:00
Simon Ser 2ca3bdc35e backend/drm: simplify atomic commit logic
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.

This is also groundwork for supporting wlr_output_test properly.
2020-05-10 09:21:04 +02:00
Simon Ser 06d5aa5780 backend/drm: GAMMA_LUT_SIZE isn't atomic
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.

It's no guaranteed to exist though, so we still need to keep the
fallback.
2020-05-10 09:20:46 +02:00
Simon Ser da63d11d34 backend/drm: remove crtc_set_cursor from interface 2020-05-09 16:42:25 +02:00
Simon Ser f8e02db4bc backend/drm: remove conn_enable from interface
Use crtc_commit instead.
2020-05-09 16:42:25 +02:00
Simon Ser c608fc89d8 backend/drm: rename crtc_pageflip to crtc_commit
Also add a flags argument.

The commit function will also be used for disabling the CRTC.
2020-05-09 16:42:25 +02:00
Simon Ser 70883fd10b backend/drm: apply gamma LUT on page-flip 2020-05-09 16:42:25 +02:00
Simon Ser 69b2279092 backend/drm: remove mode argument to crtc_pageflip
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending
output changes. More fields will be added in the future (e.g. active,
gamma).
2020-05-09 16:42:25 +02:00
Simon Ser c9d6b18eef backend/drm: remove wlr_drm_interface.crtc_move_cursor
Instead, make the legacy backend call drmModeMoveCursor on page-flip.
2020-05-09 16:42:25 +02:00
Tudor Brindus 6357e166f9 backend/wayland: emit tablet tool axis events to the axis handler 2020-05-04 21:53:52 +02:00
Simon Ser 46c83cbf3d backend/headless: handle renderer destroy
When the headless backend uses an already-existing renderer, it doesn't
have ownership over the renderer. When the renderer is destroyed, the
headless backend needs to destroy itself.
2020-05-02 19:36:03 +02:00
Simon Ser 7720ce7827 backend/multi: handle backends depending on each other properly
wl_list_for_each_safe only allows the current list item to be removed.
If a backend destroys itself when another backend is destroyed, this
blows up.
2020-05-02 19:36:03 +02:00
Simon Ser 90ede7f838 backend/drm: make page-flip error scarier
The logs don't currently display the importance of a line. It's easy to
read "skipping page-flip" as a debug message instead of an error
message.

Change the error message to make it more explicit.

References: https://github.com/swaywm/wlroots/pull/2147
2020-05-01 16:48:42 +02:00
Will Daly 044a9f28d6 Fix error when reconnecting external display
Reconnecting an external display fails on initial
page-flip.  This occurs when the pageflip_pending flag
has been set on the connector at the time the monitor
is removed.  Once the connector's CRTC has been deallocated,
page_flip_handler cannot find the connector by its crtc_id,
so pageflip_pending will remain set.  This causes
initialization to fail when the monitor is reconnected
with the error messages:

    Skipping pageflip on output 'X'
    Failed to initialize renderer on connector 'X': initial page-flip failed

To fix this problem, clear the pageflip_pending flag
when cleaning up the connector.
2020-05-01 16:01:30 +02:00
Scott Anderson 906c0766df Remove libcap support
This is simply a false sense of security, and is worse than just using
setuid. CAP_SYS_ADMIN is an extremely serious capability that is
effectively as powerful as root.

It also required users to be in the input group, which allows any
process to keylog the entire system.
2020-04-29 10:39:09 +02:00
Simon Ser 98d949718c backend/drm: strip alpha channel if necessary
Some primary planes don't support ARGB8888, they only support XRGB8888
(for instance on older Intel hardware). The DRM backend would fail to
initialize.

When that's the case, try to allocate buffers without an alpha channel.
2020-04-29 08:32:06 +02:00
Scott Anderson 321537ee92 backend/drm: don't allow legacy to use direct scanout 2020-04-28 09:54:52 +02:00
Scott Anderson 52281cb8ba backend/drm: move atomic cursor code into pageflip code
It makes sense to construct as much atomic state as possible in the same
place, so it doesn't get lost if we "reset" it.
2020-04-28 09:54:52 +02:00
Scott Anderson be90062c51 backend/drm: don't have fallback atomic commits
This is just doing atomic incorrectly.
2020-04-28 09:54:52 +02:00
Scott Anderson 8da9d9679e backend/drm: introduce wlr_drm_fb
This is a type which manages gbm_surfaces and imported dmabufs in the
same place, and makes the lifetime management between the two shared. It
should lead to easier to understand code, and fewer special cases.

This also contains a fair bit of refactoring to start using this new
type.

Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-28 09:54:52 +02:00
Tudor Brindus 39af3535c3 input/tablet: populate tool tip event position
This commit doesn't fix any issue that I'm aware of, since sway
incidentally does not use these fields. Still, they exist, so they
should probably be filled in to prevent fun surprises in the future.
2020-04-27 10:20:44 +02:00
Simon Ser 6129a6f93e backend/headless: add wlr_headless_backend_create_with_renderer
This allows one to create a headless backend with an existing renderer.
2020-04-22 22:40:54 +02:00
Simon Ser 40513f1a0e backend/headless: use FBOs instead of pbuffers 2020-04-22 22:40:54 +02:00
Simon Ser ab4f642153 build: use dicts instead of get_variable
Closes: https://github.com/swaywm/wlroots/issues/1963
2020-04-21 15:26:45 +02:00
Tudor Brindus f0d818f36e backend/libinput: correctly populate x/y fields on tablet proximity in
Otherwise, the cursor will briefly jump to (0, 0). This is particularly
noticeable in the referenced issue (the game osu!).

Refs swaywm/sway#3633
2020-04-21 09:22:26 +02:00
Kenny Levinsen 904c37845d logind: Close fd before releasing device
This speeds up shutdown significantly, and is in line with how Weston
does it.
2020-04-15 21:36:19 +02:00
Simon Ser ab4dc1636c backend/multi: add backends at end of list
This allows wlr_multi_for_each_backend to iterate on the backends in the
order where they have been added.
2020-04-14 16:05:58 +02:00
Simon Ser 83c1ba7783 backend/wayland: check scan-out buffer is compatible in output_test
If the buffer doesn't have a supported format/modifier, make the test
fail.
2020-04-10 15:52:20 +02:00
Simon Ser 50ade3671f output: check for buffer size compatibility in common code
Instead of checking for buffer size compatibility in each backend,
centralize the check in wlr_output itself.
2020-04-10 15:52:20 +02:00
Simon Ser 5f092c55d1 output: fix blurred hw cursors with fractional scaling
The scaling factor was being implicitly cast to an int.

Closes: https://github.com/swaywm/sway/issues/4927
2020-04-10 15:10:12 +02:00
Simon Ser 9acca4fc73 backend: set EGL_RENDERABLE_TYPE and EGL_SURFACE_TYPE
Ensure these are set to the correct value.
2020-04-09 00:15:25 +00:00
Simon Ser 507d9bc19e Add wlr_output_impl.rollback
Most of the pending output state is not forwarded to the backend prior
to an output commit. For instance, wlr_output_set_mode just stashes the
mode without calling any wlr_output_impl function.
wlr_output_impl.commit is responsible for applying the pending mode.

However, there are exceptions to this rule. The first one is
wlr_output_attach_render. It won't go away before renderer v6 is
complete, because it needs to set the current EGL surface.

The second one is wlr_output_attach_buffer.
wlr_output_impl.attach_buffer is removed in [1].

When wlr_output_rollback is called, all pending state is supposed to be
cleared. This works for all the state except the two exceptions
mentionned above. To fix this, introduce wlr_output_impl.rollback.

Right now, the backend resets the current EGL surface. This prevents GL
commands from affecting the output after wlr_output_rollback.

This patch is required for FBO-based outputs to work properly. The
compositor might be using FBOs for its own purposes [2], having leftover
FBO state can have bad consequences.

[1]: https://github.com/swaywm/wlroots/pull/2097
[2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08 17:33:00 +02:00
Simon Ser d3bd5f2a7b backend: reset EGL surface after buffer swap
This prevents GL commands to affect a previously current EGL surface
after a buffer swap.
2020-04-08 17:33:00 +02:00
Simon Ser 6977f3a843 output: check buffer in wlr_output_test
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.

This brings the wlr_output API more in line with the KMS API.

This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
2020-04-08 16:31:21 +02:00
Simon Ser e041158988 output: introduce wlr_output_test 2020-04-08 16:31:21 +02:00
Simon Ser 6595db6409 buffer: add a release event
Consumers call wlr_buffer_lock. Once all consumers are done with the
buffer, only the producer should have a reference to the buffer. In this
case, we can release the buffer (and let the producer re-use it).
2020-04-02 15:03:43 +02:00
Scott Moreau 30308e35fa build: Add 'auto' to logind-provider combo option
The logind provider defaulted to systemd and in order to use elogind,
-Dlogin-provider=elogind was required. This adds 'auto' as a choice
for the login-provider option and sets it as default. Using 'auto',
the build will check for systemd first and if it's not found, try
to find and use elogind automatically.
2020-03-24 14:11:39 +01:00
Simon Ser b614ded3fc backend/wayland: close keymap FD
We don't actually need the keymap. We need to close the FD or we will
run out of FDs.
2020-03-17 13:37:53 +01:00
Filip Sandborg 5ee52a3ab9
Fix uint32 overflow in fill_empty_gamma_table on Icelake platform
Closes: https://github.com/swaywm/sway/issues/4826
2020-03-15 18:41:12 +01:00
Simon Ser 52c67284e2 backend/drm: add support for adaptive_sync_enabled
The vrr_capable and VRR_ENABLED properties are used.
2020-03-06 21:32:58 +01:00
Simon Ser 9be1af3afb backend/x11: add support for adaptive_sync_enabled
This sets the _VARIABLE_REFRESH window property [1].

[1]: 0616b7ac90/src/vulkan/wsi/wsi_common_x11.c (L1374)
2020-03-06 21:32:58 +01:00
Simon Ser a3c699eee5 backend/wayland: fix seat caps handling
Previously, each time a wl_seat.capabilities event was received the
Wayland backend created new input devices. It now only does so the first
time.

Input devices are now destroyed when the cap is removed.

Closes: https://github.com/swaywm/sway/issues/5055
2020-03-04 09:57:10 +01:00
Simon Ser 348f52b5fc output: remove wlr_output_impl.schedule_frame
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.

There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.

However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:

- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
  screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen

With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.

This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.

References: https://github.com/swaywm/wlroots/issues/1925
2020-03-04 03:22:19 +01:00
Simon Ser 613f9c6f8d backend/wayland: rename wl_seat.c to seat.c
I never got why we have a wl_ prefix here.
2020-03-04 03:21:40 +01:00
Jan Beich 2bad34e024 backend/session: allow GPU enumeration on FreeBSD
f11ee5b418
2020-02-17 10:43:58 +01:00
Rouven Czerwinski 144d2041ad backend/drm: remove overzealous finish_drm_surface
The previous PR was overzealous in adding a finish_drm_surface call
which was also done by the caller. Remove the call and also move the
comment to the correct code location.
2020-01-24 19:57:09 +01:00
Rouven Czerwinski f0594fb732 backend/drm: add env variable to disable modifiers
In some cases modesets fail if the planes are initialized with
modifiers. Since in this case possibly all planes need to reinitialized,
which is not possible in the current wlroots design, add an environment
variable for affected users.
2020-01-24 19:43:51 +01:00
Scott Anderson 70a084c119 meson: Fix protocol includes for compositor examples 2020-01-24 09:10:28 +00:00
Simon Ser 7c05933e51 backend/drm: prevent outputs from being destroyed on commit
This would happen if initializing the renderer fails. Instead, we just
mark the output as disabled.

References: https://github.com/swaywm/sway/pull/4917
2020-01-17 06:49:31 -07:00
Simon Ser 2b04857343 render/egl: remove SURFACELESS_MESA special case
Users can just pass EGL_DEFAULT_DISPLAY themselves.
2020-01-12 10:10:09 -07:00
Drew DeVault ebdbe177d6 Drop RDP backend
Users interested in remote access to wlroots compositors should use
wayvnc:

https://github.com/any1/wayvnc
2020-01-10 19:38:39 +01:00
Simon Ser 802ef9da8a backend/wayland: handle display errors more gracefully
Previously, an error on the remote Wayland display would result in an
infinite loop priting:

    2020-01-09 13:39:03 - [wayland] Source dispatch function returned negative value!
    2020-01-09 13:39:03 - [wayland] This would previously accidentally suppress a follow-up dispatch

This happens when the remote compositor disconnects the client because
of a protocol error, for instance.

Handle wl_display_dispatch and wl_display_dispatch_pending returning -1
by terminating the local display and printing an error.
2020-01-09 07:48:30 -07:00
Simon Ser e6fd880686 backend/wayland: listen to wl_buffer.release events
Previously, we just assumed submitting a new frame would make the
compositor release the current one. This isn't always the case, for
instance Sway retains old buffers when a transaction is pending. This
resulted in synchronization issues with clients writing in
front-buffers.

Fix this by un-referencing a wlr_buffer when the parent compositor sends
wl_buffer.release.

Tested by running a fullscreen mpv instance in Sway with the Wayland
backend.
2020-01-09 07:41:50 -07:00
Jason b5cb6de232 Allow WLR_RDP_PORT to be any valid TCP/UDP port number 2020-01-08 10:29:52 +01:00
Simon Ser 5bbb44482b backend/wayland: fix frame callback not registered
This got removed in [1]. I probably messed up the rebase.

[1]: https://github.com/swaywm/wlroots/pull/1797/files#diff-3065f86e6de87d143d4a7673a8ee3a2d

Fixes: 5d1ba0f446 ("output: re-introduce atomic mode, enabled, scale and transform")
2020-01-02 12:44:28 -07:00
Simon Ser 21e1953b61 backend/drm: don't modeset with a NULL mode after TTY switch
This fixes a segfault in drm_connector_set_mode (mode = NULL).

This happens because we set wlr_output.enabled to true if the connector
is attached to the CRTC. When the user disables an output in the
wlroots-based compositor, switches to another VT (enabling the output),
then switches back, wlroots sets wlr_output.enabled to true but
wlr_output.current_mode is NULL.

We should consider not reading properties from KMS after a TTY switch,
disabling all connectors. However this may result in flickering (outputs
being disabled then re-enabled).

Closes: https://github.com/swaywm/wlroots/issues/1874
2019-12-30 14:32:37 -07:00
Simon Ser 8fc16890c7 output: refuse to commit a buffer or modeset a disabled output
References: https://github.com/swaywm/wlroots/issues/1780#issuecomment-518938390
2019-12-30 11:21:11 -07:00
Simon Ser f0781cd792 backend/drm: modeset before enabling an output
This saves one modeset in case the previous mode is different.
2019-12-30 11:21:11 -07:00
Simon Ser 5d1ba0f446 output: re-introduce atomic mode, enabled, scale and transform
This reverts commit 01f903874b and re-applies
commit ee5f98ad49.

Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue)
See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR)
See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-30 11:21:11 -07:00
Simon Ser 4da4a15d6b output: add description
wlr_output.description is a string containing a human-readable string
identifying the output. Compositors can customise it via
wlr_output_set_description, for instance to make the name more
user-friendly.

References: https://github.com/swaywm/wlroots/issues/1623
2019-12-29 12:35:22 -05:00
Scott Anderson cff1c2f740 meson: Various improvements
Bumps minimum version to 0.51.0

- Remove all intermediate static libraries.
  They serve no purpose and are just add a bunch of boilerplate for
  managing dependencies and options. It's now managed as a list of
  files which are compiled into libwlroots directly.

- Use install_subdir instead of installing headers individually.
  I've changed my mind since I did that. Listing them out is annoying as
  hell, and it's easy to forget to do it.

- Add not_found_message for all of our optional dependencies that have a
  meson option. It gives some hints about what option to pass and what
  the optional dependency is for.

- Move all backend subdirectories into their own meson.build. This
keeps some of the backend-specific build logic (especially rdp and
session) more neatly separated off.

- Don't overlink example clients with code they're not using.
  This was done by merging the protocol dictionaries and setting some
  variables containing the code and client header file.
  Example clients now explicitly mention what extension protocols they
  want to link to.

- Split compositor example logic from client example logic.

- Minor formatting changes
2019-12-23 07:48:29 -05:00
Ting-Wei Lan fc6c0ca12e backend/session/freebsd: Fix the way to get TTY path
Previously, the path of TTY is generated using snprintf with %d format.
It works with TTY 1 to 10, but fails with TTY with greater number
because the number used in the name is in base 32 instead of base 10.
Since there is no standard function to convert a number to a string with
a custom base, this commit adds a function to do it.

Fixes: https://github.com/swaywm/wlroots/issues/1854
2019-12-22 11:23:41 +01:00
Rouven Czerwinski be4b9f7f5b backend/drm: print preferred mode
While printing the supported output modes, annotate the preferred mode.
2019-12-20 11:00:21 +01:00
Simon Ser 515679e4fe Refactor EGL/GL API loading
Remove glapi.sh code generation, replace it with hand-written loading
code that checks extension strings before calling eglGetProcAddress.

The GLES2 renderer still uses global state because of:

- {PUSH,POP}_GLES2_DEBUG macros
- wlr_gles2_texture_from_* taking a wlr_egl instead of the renderer
2019-12-20 01:03:34 +00:00
Simon Ser efd294ef09 backend/drm: add BenQ to manufacturer list 2019-12-11 08:18:45 -05:00
Simon Ser 6ca82087b1 backend/drm: fix segfault in init_drm_surface
When surf->gbm was previously set, we destroy it without setting it to
NULL. Later on, we only create the GBM surface if surf->gbm is NULL.
This result in a use-after-free when we start using surf->gbm.

Closes: https://github.com/swaywm/wlroots/issues/1868
Closes: https://github.com/swaywm/wlroots/issues/1874
Closes: https://github.com/swaywm/sway/issues/4785
Closes: https://github.com/swaywm/sway/issues/4717
Closes: https://github.com/swaywm/sway/issues/4730
Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
2019-12-05 10:49:04 -05:00
Simon Ser 8681e4ab8a backend/drm, backend/libinput: listen to session destroy
This fixes a heap-use-after-free when the session is destroyed before
the backend during wl_display_destroy:

    ==1085==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000000180 at pc 0x7f88e3590c2d bp 0x7ffdc4e33f90 sp 0x7ffdc4e33f80
    READ of size 8 at 0x614000000180 thread T0
        #0 0x7f88e3590c2c in find_device ../subprojects/wlroots/backend/session/session.c:192
        #1 0x7f88e3590e85 in wlr_session_close_file ../subprojects/wlroots/backend/session/session.c:204
        #2 0x7f88e357b80c in libinput_close_restricted ../subprojects/wlroots/backend/libinput/backend.c:24
        #3 0x7f88e21af274  (/lib64/libinput.so.10+0x28274)
        #4 0x7f88e21aff1d  (/lib64/libinput.so.10+0x28f1d)
        #5 0x7f88e219ddac  (/lib64/libinput.so.10+0x16dac)
        #6 0x7f88e21b415d in libinput_unref (/lib64/libinput.so.10+0x2d15d)
        #7 0x7f88e357c9d6 in backend_destroy ../subprojects/wlroots/backend/libinput/backend.c:130
        #8 0x7f88e3545a09 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:50
        #9 0x7f88e358981a in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:54
        #10 0x7f88e358a059 in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:107
        #11 0x7f88e314acde  (/lib64/libwayland-server.so.0+0x8cde)
        #12 0x7f88e314b466 in wl_display_destroy (/lib64/libwayland-server.so.0+0x9466)
        #13 0x559fefb52385 in main ../main.c:67
        #14 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
        #15 0x559fefb4297d in _start (/home/simon/src/glider/build/glider+0x2297d)

    0x614000000180 is located 320 bytes inside of 416-byte region [0x614000000040,0x6140000001e0)
    freed by thread T0 here:
        #0 0x7f88e3d0a6b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
        #1 0x7f88e35b51fb in logind_session_destroy ../subprojects/wlroots/backend/session/logind.c:270
        #2 0x7f88e35905a4 in wlr_session_destroy ../subprojects/wlroots/backend/session/session.c:156
        #3 0x7f88e358f440 in handle_display_destroy ../subprojects/wlroots/backend/session/session.c:65
        #4 0x7f88e314acde  (/lib64/libwayland-server.so.0+0x8cde)

    previously allocated by thread T0 here:
        #0 0x7f88e3d0acd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
        #1 0x7f88e35b911c in logind_session_create ../subprojects/wlroots/backend/session/logind.c:746
        #2 0x7f88e358f6b4 in wlr_session_create ../subprojects/wlroots/backend/session/session.c:91
        #3 0x559fefb51ea6 in main ../main.c:20
        #4 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
2019-12-01 10:26:12 -05:00
Jason e8855ee462 Amend typos 2019-11-23 10:33:47 -05:00
Simon Ser e959b882d5 backend/wayland: add support for presentation-time 2019-11-21 11:32:30 -05:00
Simon Ser 16e5e9541b Add -Wmissing-prototypes
This requires functions without a prototype definition to be static.
This allows to detect dead code, export less symbols and put shared
functions in headers.
2019-11-20 02:05:03 +00:00
Scott Anderson 685a5a11a9 backend/x11: Revert usage of present extension
This reverts commit 3317134adf.
This reverts commit a3c3b928a3.

There are some serious issues when running this on a real X server, as
opposed to running this on Xwayland, where this was tested.

More investigation needs to be done into why these issues happen and if
our usage of the present extension is correct.
2019-11-19 11:06:38 +01:00
Scott Anderson 3317134adf backend/x11: Drop required present version
We say 1.2, but I don't think we actually use anything that was
introduced past 1.0.
2019-11-18 11:53:17 +01:00
Scott Anderson b58e8451b8 backend: Do not attempt DRM on X11/WL failure
This can really mess with the session if logind is not being used,
and it's going to always fail anyway.
2019-11-18 11:53:17 +01:00
Simon Ser 6c649bab53 output: add wlr_output_event_present.commit_seq
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.

References: https://github.com/swaywm/wlroots/issues/1917
2019-11-17 00:12:59 +01:00
Simon Ser cde544de81 backend/wayland: expose remote objects
Expose the remote wl_display, wl_surface and wl_seat used by the Wayland
backend.

This allows compositors to customize the Wayland backend and to have
more freedom. For instance a compositor might want to handle clipboard
and drag-and-drop from the remote Wayland compositor. Another compositor
might want to setup pointer constraints.
2019-11-13 10:15:28 -05:00