Commit Graph

1334 Commits

Author SHA1 Message Date
Simon Ser d0bf750916 backend/drm: use atomic test-only commits for direct scan-out
This allows callers to use wlr_output_test to figure out whether a
buffer can be scanned out prior to committing the output.
2021-04-06 20:35:15 +02:00
Simon Ser 7efc2d05b7 backend/drm: downgrade test-only commit failure log level
Let's not clutter the logs with error messages when a test-only
atomic commit fails.
2021-04-06 20:35:15 +02:00
Simon Ser 5088e25eaf backend/drm: don't set NONBLOCK with TEST_ONLY
The kernel ignores NONBLOCK when TEST_ONLY is set. Let's just not
set it, to make it clear it's unused.
2021-04-06 20:35:15 +02:00
Simon Ser e9361e0492 backend/x11: reject DMA-BUFs with flags
We cannot scan-out DMA-BUFs with any flag right now.
2021-04-06 15:03:52 +02:00
Simon Ser 6bfbf35618 backend/drm: reject DMA-BUFs with flags
We cannot scan-out DMA-BUFs with any flag right now.
2021-04-06 15:02:57 +02:00
Simon Ser 1ec97bdf4f backend/drm: improve logs in drm_fb_create
Downgrade errors to DEBUG level, because drm_fb_create is used in
test_buffer, so errors aren't always fatal. Add ERROR logs at call
sites where a failure is fatal, to make it clear something wrong
happened.
2021-04-06 14:57:59 +02:00
Simon Ser 511e42be5e backend/drm: try to import buffer when testing it
If the import to KMS succeeds, we have a better chance to be able to
scan it out.

Importing is also necessary for test-only commits, which we want to
add in the future.
2021-04-06 14:57:59 +02:00
Simon Ser 07a5345aa5 build: add subproject fallback for libseat
This allows libseat to be compiled as a Meson subproject when it's
not installed system-wide. This can ease development and compilation
on distributions where libseat isn't packaged.
2021-04-02 19:13:17 +02:00
Simon Ser 7709a965e5 backend/drm: use format table in test_buffer
Instead of an ad-hoc strip_alpha_channel function, use the
centralized format table to get an opaque substitute.
2021-03-31 17:29:31 +02:00
Simon Ser b89bcffea4 render/egl, backend/wayland: add workaround for split render/display setups
Split render/display setups have two separate devices: one display-only
with a primary node, and one render-only with a render node. However
in these cases the EGL implementation and the Wayland compositor will
advertise the display device instead of the render device [1]. The EGL
implementation will magically open the render device when the display
device is passed in.

So just pass the display device as if it were a render device. Maybe in
the future Mesa will advertise the render device instead and we'll be
able to remove this workaround.

[1]: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4178
2021-03-27 11:23:32 +01:00
Simon Zeni c8b3536b01 backend/drm: use pixel format table in renderer 2021-03-25 10:55:54 +01:00
Simon Ser c740fccc9d Fix buffer blit matrices
There was a missing wlr_matrix_scale call, so we ended up with black
frames.

Closes: https://github.com/swaywm/wlroots/issues/2780
2021-03-16 17:57:51 +01:00
Kenny Levinsen 883d5b6e7c backend/session/libseat: Set loglevel to INFO 2021-03-15 21:29:22 +01:00
Simon Ser 44fa2c4b49 output: fix transform matrix for 90/270 rotations
We need to adjust the second translation depending on the transform
we applied.

Fixes: 9601a2abf0 ("output: improve transform matrix calculation"
Closes: https://github.com/swaywm/wlroots/issues/2774
2021-03-11 22:52:38 +01:00
Simon Zeni 9601a2abf0 output: improve transform matrix calculation
Compute only the transform matrix in the output. The projection matrix
will be calculated inside the gles2 renderer when we start rendering.

The goal is to help the pixman rendering process.
2021-03-10 15:33:36 +01:00
Ilia Mirkin 10dbb00f5f backend/x11: clamp hotspot to texture bounds
When a new texture is set, the hotspot may actually belong to the
previous texture and be out of bounds. Rather than incur X errors for
these, clamp the hotspot to be inside of the texture.

This fixes weston examples updating their cursors (e.g.
weston-eventdemo).
2021-03-09 22:27:07 +01:00
Simon Ser a02da8e6f6 backend/drm: add new writeback and SPI connector types
We already depend on libdrm 2.4.95, which is the first to have the
writeback connector type.
2021-03-05 17:59:26 +01:00
Simon Ser 73137ace84 backend/session: fix KMS device filtering
As explained in [1], user-space should perform a drmModeGetResources
call to figure out whether a device supports KMS.

[1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/127
2021-02-28 21:07:48 +01:00
Simon Ser b54ef3372d render: use DRM formats in wlr_renderer_read_pixels 2021-02-23 16:09:26 +01:00
Simon Ser f3758d1d0a backend: add error messages in attach_render impls 2021-02-18 22:14:19 +01:00
Simon Ser 6f873078d4 build: use dictionnary for features instead of configuration_data
This allows us to easily iterate on all features and only deal with
bools.
2021-02-15 16:32:33 +01:00
Simon Ser 533a36f05a backend/x11: drop x11-xcb dependency
We don't need it anymore now that we've stopped using the EGL Xlib
platform.
2021-02-08 12:29:12 +01:00
Ilia Mirkin ef94e7e847 backend/x11: use native cursors
Fixes #2659
2021-02-05 11:45:54 +01:00
Manuel Stoeckl a290d7a78d Make implementation function lists static const
This requires a change to the type of `struct wlr_tablet` and
`wlr_tablet_init` signature, both of which are part of the unstable API.
2021-02-05 10:04:20 +01:00
Simon Ser 8e27418dd3 backend/wayland: flush remote display
It turns out wl_event_source_check is not enough to guarantee that the
remote wl_display will be flushed after we queue requests. We need to
explicitly flush, just like we do in our X11 code.

References: https://gitlab.freedesktop.org/wayland/wayland/-/issues/187
2021-02-03 15:22:36 +01:00
Simon Ser 7b50f5d324 backend/wayland: remove unnecessary cast 2021-01-29 12:12:47 +01:00
Simon Ser 50b9921642
backend/x11: remove output_set_refresh
The X11 backend uses the Present extension to schedule frames. The
refresh rate is unused.
2021-01-28 18:47:47 +01:00
Simon Ser 73ffab70b0 backend/drm: don't blit in drm_fb_import
Instead blit in drm_plane_lock_surface. This makes drm_fb_import simpler
and better fits its name.
2021-01-24 18:33:56 +01:00
Simon Ser 4af85f4c19 backend/drm: simplify drm_fb_lock_surface
Make it take a plane instead, and rename to drm_plane_lock_surface.
2021-01-24 18:22:03 +01:00
Ilia Mirkin 7bc8dbb991 backend/x11: keep track of exposed rects, add them to damage regions
When we receive an Expose event, that means that we must redraw that
region of the X11 window. Keep track of these regions with pixman
regions, and merge them with the additional output damaged regions.

Fixes #2670
2021-01-21 15:14:54 +01:00
Ilia Mirkin 922b7f415d backend/x11: skip events we don't care about
These are ones I see log messages about in my setup.
2021-01-21 15:14:54 +01:00
Ilia Mirkin bb92fd4c90 backend/x11: add support for scanout mode
This makes full-screen with weston-terminal work.
2021-01-21 12:35:52 +01:00
Ilia Mirkin 62f37ee319 backend/x11: make sure output transform matrix is initialized
The transform matrix was all 0's, which meant that effectively nothing
got rendered other than the clear color.
2021-01-20 14:55:27 +01:00
Simon Ser 702eed5cbd backend/x11: fix region not being actually used
The region variable was shadowed in an if block. As a result, in the
outer block region was always XCB_NONE and was never destroyed (causing
a memory leak on the server).

Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
2021-01-18 22:31:09 +01:00
Ilia Mirkin 966e653935 backend/x11: set a blank cursor rather than hiding globally
This actually simplifies the logic since we no longer have to wait for
enter/leave events, and also improves the UX when e.g. handling a crash
with gdb attached.

See #2659
2021-01-18 21:07:11 +01:00
Simon Ser 04d89a8bc5
backend/drm: fix modifiers for cursor plane buffers
In 93cd3a79b2 ("backend/drm: stop using GBM flags"), we stopped
using the GBM_BO_USE_LINEAR flag in favor of a modifier list set
to { DRM_FORMAT_MOD_LINEAR }. However, the last argument of
drm_plane_init_surface disables modifiers -- so the buffer will just
get allocated with an implicit modifier, without necessarily being
LINEAR.

To fix this, allow modifiers when allocating the cursor buffers.
wlr_drm_plane.formats should already have the necessary LINEAR
restrictions.

Fixes: 93cd3a79b2 ("backend/drm: stop using GBM flags")
2021-01-17 22:25:18 +01:00
Simon Ser f17b0f975d backend/drm: add wlr_drm_connector_get_id
This allows a compositor to get a KMS connector object ID from a
wlr_output. The compositor can then query more information about
the connector via libdrm.

This gives more freedom to compositors and allows them to read
KMS properties that wlroots doesn't know about. For instance,
they could read the EDID or the suggested_{X,Y} properties and
change their output configuration based on that.
2021-01-17 12:42:32 +01:00
Simon Ser cb6f584496 backend/drm: add support for the subconnector property
The subconnector property indicates the connector sub-type. This is
useful because that usually indicates what kind of connector the user
has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will
indicate a DVI subconnector. Also some laptops have non-DP connectors
that are internally linked to a DP port on the GPU.

Set the output description accordingly.

See https://drmdb.emersion.fr/properties/3233857728/subconnector
2021-01-17 12:42:25 +01:00
Simon Ser 879cadd34e backend/x11: add xcb_dri3_pixmap_from_buffers check for n_planes
Just in case.
2021-01-17 12:08:40 +01:00
Simon Ser e537382991 backend/x11: add support for DRI3 1.0
Add fallbacks when DRI3 1.2 isn't supported.

Closes: https://github.com/swaywm/wlroots/issues/2586
2021-01-17 12:08:40 +01:00
Simon Ser 284233c34f backend/x11: log DRM node name 2021-01-17 10:28:12 +01:00
Simon Ser 5373187186 backend/x11: log when creating X11 backend 2021-01-17 10:28:12 +01:00
Simon Ser c6c7fccd96
backend/headless: create renderer after wlr_backend_init
We were calling wlr_renderer_autocreate before wlr_backend_init,
which caused a NULL dereference on wlr_backend.impl.
2021-01-17 01:08:40 +01:00
Simon Ser 9e98f497af backend/drm: use local DRM FD for wlr_rend
The new wlr_renderer_autocreate API is great for compositors, however
it causes some issues with DRM multi-GPU support.

A DRM child backend wants the compositor to use the parent GPU, so it
exposes the parent's DRM FD in get_drm_fd. However, in order to be able
to perform multi-GPU buffer copies, the child DRM backend still needs to
create a local renderer.

Use the new private wlr_renderer_autocreate_with_drm_fd function to
avoid creating a renderer for the parent GPU.

Fixes: e128e6c08d ("render: drop egl parameters from wlr_renderer_autocreate")
2021-01-16 22:52:26 +01:00
Simon Ser afdf4dc890 render/gles2: make EGL context current in bind_buffer
Instead of requiring callers to manually make the EGL context current
before binding a buffer and unsetting it after unbinding a buffer, do
it inside wlr_renderer_bind_buffer.

This hides renderer-specific implementation details inside the
wlr_renderer interface. Non-GLES2 renderers may not use EGL.
This removes all EGL dependencies from the backends.

References: https://github.com/swaywm/wlroots/issues/2618
References: https://github.com/swaywm/wlroots/pull/2615#issuecomment-756687006
2021-01-16 09:06:17 +01:00
Simon Zeni 08a4c62aac render: remove egl include from wlr_renderer 2021-01-16 08:57:42 +01:00
Simon Zeni e128e6c08d render: drop egl parameters from wlr_renderer_autocreate 2021-01-16 08:57:42 +01:00
Simon Ser affc59454e backend/headless: implement get_drm_fd 2021-01-16 08:57:42 +01:00
Simon Ser 6dfc8ce00b backend/x11: implement get_drm_fd 2021-01-16 08:57:42 +01:00
Simon Ser b7c95d483a backend/drm: implement get_drm_fd 2021-01-16 08:57:42 +01:00
Simon Ser 400f4e7f27 backend/wayland: implement get_drm_fd 2021-01-16 08:57:42 +01:00
Simon Ser ad3a455db9 backend/multi: implement get_drm_fd
Just like get_renderer, iterate over all sub-backends until we find one
that implements get_drm_fd.
2021-01-16 08:57:42 +01:00
Simon Ser a53ab146fe backend: add get_drm_fd to interface
This function allows backends to return the DRM FD they are using. This
will allow the allocator and the renderer to use the right device.
2021-01-16 08:57:42 +01:00
Simon Ser a6a0568316
backend: remove unnecessary GLES2 includes 2021-01-14 12:36:49 +01:00
Simon Ser dc61f471da
backend/drm: remove unnecessary wlr_drm_fb.wlr_buf check
We don't need this check, wlr_buf is guaranteed not to be NULL.
2021-01-13 19:01:02 +01:00
Simon Ser 5d054258af
backend/drm: fix segfault in page_flip_handler
Since 5b1b43c68c ("backend/drm: make wlr_drm_plane.{pending,queued,current}_fb
pointers"), current_fb can be NULL if there's no buffer. If current_fb
is not NULL, current_fb->wlr_buf is guaranteed to not be NULL.

Closes: https://github.com/swaywm/wlroots/issues/2634
2021-01-12 11:41:45 +01:00
Simon Ser 3f7e0cf5f0 render/egl: remove surface and buffer age args from make_current
These aren't used anymore.
2021-01-12 11:31:04 +01:00
Simon Ser 098094c5cb backend/wayland: use the EGL GBM platform
Just like other backends, use the EGL GBM platform. This will make it
easier to move the allocator and renderer initialization out of the
backends.
2021-01-10 11:32:00 +01:00
Simon Ser c94728b53a
backend/drm: stop using surface size for BO
Stop using wlr_drm_surface.{width,height} to figure out the size of a
gbm_bo. In the future we'll stop using wlr_drm_plane.surf, so these will
be zero. Instead, rely on gbm_bo_get_{width,height}.
2021-01-10 11:24:44 +01:00
Simon Ser d9bbc416a6 backend/drm: re-use FBs
Instead of importing buffers to GBM and KMS at each frame, cache them
and re-use them while the wlr_buffer is alive.

This is the same as [1] and [2] but for the DRM backend.

[1]: https://github.com/swaywm/wlroots/pull/2538
[2]: https://github.com/swaywm/wlroots/pull/2539
2021-01-10 11:24:35 +01:00
Simon Ser 91cb0fc443 backend/drm: only keep track of local buffer
Stop keeping track of buffers on the parent GPU when multi-GPU is used.

This removes support for export_dmabuf on secondary GPUs, but renderer
v6 will bring this back by managing the swapchains in wlr_output instead
of the backends.
2021-01-10 11:24:35 +01:00
Simon Ser 5bd86b94f9 backend/drm: add wlr_drm_buf.local_wlr_buf 2021-01-10 11:24:35 +01:00
Simon Ser cd64610c66 backend/drm: introduce drm_fb_create 2021-01-10 11:24:35 +01:00
Simon Ser 5b1b43c68c backend/drm: make wlr_drm_plane.{pending,queued,current}_fb pointers
This will be useful once we start re-using wlr_drm_fb.
2021-01-10 11:24:35 +01:00
Simon Zeni 9192c0480a remove unnecessary egl includes 2021-01-07 17:11:22 +01:00
Simon Zeni b899a412e3 backend: remove wlr_egl from all backends 2021-01-07 17:11:22 +01:00
Simon Ser 5773794baf
backend/drm: don't log errno on plane_get_next_fb failure
errno isn't guaranteed to be set after a plane_get_next_fb failure, so
we were printing garbage.
2021-01-07 16:53:20 +01:00
Simon Ser 07d75c99db render: remove EGL config and visual from wlr_renderer_autocreate
This isn't used anymore by any backend.

Some examples still provide an EGL config to wlr_egl_init, so we can't
drop it yet there.
2021-01-06 12:05:51 +01:00
Simon Ser 3721dbfddb
backend/wayland: remove unnecessary flags from event source
wl_event_loop_add_fd only accepts READABLE and WRITABLE. ERROR and
HANGUP are always implicitly enabled.
2021-01-05 19:54:20 +01:00
Kenny Levinsen d3047011d0 backend/wayland: Avoid uninitialized read
keyboard_handle_leave would always process 1 keycode more than was
pending, which meant reading uninitialized memory from the "pressed"
array.

Found by valgrind.
2021-01-05 12:26:00 +01:00
Simon Ser e8d56ca415 backend/session: allow wlr_session_find_gpus to return an error
Sometimes wlr_session_find_gpus will encounter an error. This is
different from finding zero GPUs.

On error, wlr_session_find_gpus already returns -1. However, this is
casted to size_t, so callers uncorrectly assume this is a success.

Instead, make wlr_session_find_gpus return a ssize_t and allow callers
to handle the error accordingly.
2021-01-04 19:46:44 +01:00
Simon Ser 7febdc7334 backend/wayland: re-use cursor wl_buffers
We were importing cursor buffers as wl_buffers over and over again.
Instead, only import these once.
2021-01-04 13:48:28 +01:00
Simon Ser adfb7cd35a backend/drm: stash pending page-flip CRTC
wlr_drm_connector.crtc may be updated by the DRM backend while a
page-flip is pending. In this case, the page-flip handler won't be able
to find the right wlr_drm_connector from the CRTC ID.

Save the CRTC when performing a page-flip to ensure we always find the
right connector when we get the event.
2021-01-03 19:35:02 +01:00
Simon Ser 576ff57db0 backend/drm: ignore hotplug events while inactive
When the session is inactive, we can't change the KMS state. Ignore
hotplug events so that compositors don't try to perform a modeset when
a connector is plugged in. We already re-scan connectors when the
session becomes active.

To test, run a wlroots compositor on VT 1, switch to VT 2, unplug a
connector, re-plug it, switch back to VT 1. Without this patch the
screen is black on VT 1.

References: https://github.com/swaywm/wlroots/issues/2370
2021-01-03 19:34:54 +01:00
Ilia Bozhinov eb30cde777 noop: listen to display destroy and destroy the backend 2020-12-31 20:34:36 +01:00
Simon Ser 4ffd537d2d
backend/x11: print version on extension error 2020-12-31 20:17:31 +01:00
Simon Ser 1491ec42da backend/x11: always open render node
If we get an authenticated primary node from the X11 server, don't use
it because we can't authenticate our Wayland clients with it. Instead,
open a render node.

Closes: https://github.com/swaywm/wlroots/issues/2576
2020-12-30 19:37:19 +01:00
Simon Ser 4b03bdc3ab Remove wlr_create_renderer_func_t
This callback allowed compositors to customize the EGL config used by
the renderer. However with renderer v6 EGL configs aren't used anymore.
Instead, buffers are allocated via GBM and GL FBOs are rendered to. So
customizing the EGL config is a no-op.
2020-12-30 17:09:40 +01:00
Simon Ser bec1e6b149 backend/drm: remove special linear case for cursor plane
We now properly mark the cursor plane's formats as linear-only, and we
now have a version of wlr_drm_format_intersect that handles the case of
linear-only formats and implicit modifiers.

We can remove the special drm_plane_init_surface flag we had for cursor
planes. This also allows us to use a non-linear layout for cursor planes
on drivers that support it.

Tested on amdgpu GFX9.
2020-12-30 11:17:43 +01:00
Simon Ser 92a0fc0435 backend/drm: extract linear format creation into function
Simplifies error handling.
2020-12-30 11:17:43 +01:00
Simon Ser 7ea0e9f277 backend/drm: force LINEAR for cursor plane formats
If the kernel driver doesn't support modifiers, it still expects cursor
FBs to have a LINEAR layout. See [1] for expectations for framebuffers
attached to the cursor plane.

[1]: https://patchwork.freedesktop.org/patch/408512/
2020-12-30 11:17:43 +01:00
Simon Ser caeed70f28 backend/x11: create per-window present event contexts
The Present protocol states:

> An event context is associated with a specific window; using an existing
> event context with a different window generates a Match error.

Instead of a global event context, use a per-window event context to fix
this error:

    [backend/x11/backend.c:608] X11 error: op Present (SelectInput), code Match (no extension), sequence 63, value 4194307

Closes: https://github.com/swaywm/wlroots/issues/2577
2020-12-28 16:57:56 +01:00
Ariadne Conill 23b6f3e3f5 drm: add fallback drmModeAddFB for drivers which do not support drmModeAddFB2
This makes wlroots able to run on some big-endian machines like G4 and
G5 systems with ATI Radeon 7500 AGP graphics.
2020-12-28 14:15:04 +01:00
Simon Ser c012d770f7 backend/x11: implement a real rendering loop
Instead of using a timer, rely on X11 Present events and send a new
frame event when the parent compositor displays a new frame on screen.

The previous attempt at doing this [1] hit issues with EGLSurface, but
we don't use that anymore.

[1]: https://github.com/swaywm/wlroots/pull/1894
2020-12-27 10:10:07 +01:00
Simon Ser c5f239f411
backend/drm: make listener names more idiomatic
Use the "<object>_<event>" notation for listeners, use
"handle_<listener>" for handlers.
2020-12-25 14:45:00 +01:00
Simon Ser b9460ab724
Stop using wlr_texture_get_size
Just use wlr_texture.{width,height} directly.
2020-12-25 12:21:29 +01:00
Simon Ser 17dd4c9e9a
backend/drm: use connector log helpers in atomic backend 2020-12-24 17:55:45 +01:00
Simon Ser a7a230ebef
backend/drm: make drmModePlane arg in add_plane const
Make it clearer it'll be free'd after add_plane returns.
2020-12-24 12:34:13 +01:00
Simon Ser c011a0e2ed
backend/drm: add special case for cursor in add_plane
The code calling add_plane now makes sure not to add a cursor plane to a
CRTC which already has one.
2020-12-24 12:31:20 +01:00
Simon Ser 5548406667
backend/drm: log whether ADDFB2 modifiers are supported 2020-12-24 12:29:30 +01:00
Simon Ser 64a2ca4dba
backend/drm: don't retry page-flip when modifiers are unsupported
Parse WLR_DRM_NO_MODIFIERS at startup. Don't parse IN_FORMATS when
WLR_DRM_NO_MODIFIERS is set, so that the legacy behaviour is better
reproduced.

When modifiers aren't supported, try the initial page-flip once only.
2020-12-23 19:49:27 +01:00
Simon Ser 54ec17ff64
backend/drm: use plural form for possible_crtcs
Make it clearer that this is a bitmask of CRTC indices.
2020-12-23 12:14:36 +01:00
Simon Ser 2de400a541
backend/drm: assert connector state after wlr_output_destroy 2020-12-22 19:53:33 +01:00
Simon Ser 85cf4b235d
backend/drm: destroy DRM connectors that disappear
This was lost during the refactoring. We were previously calling
wlr_output_destroy, which destroyed the connector as well.

Fixes: 248c7787c7 ("backend/drm: refactor wlr_output destruction")
2020-12-22 19:38:29 +01:00
Simon Ser ad4dae0844 backend/drm: error on size mismatch in drm_surface_blit 2020-12-22 15:53:10 +01:00
Simon Ser d3bcd63a40 backend/drm: remove drm_fb_acquire
Instead, import the buffer into GBM and KMS in drm_fb_import. Also move
the multi-GPU copy there if necessary.
2020-12-22 15:53:10 +01:00
Simon Ser 5ee8b12dc3 backend/drm: make drm_fb_acquire return a FB ID 2020-12-22 15:53:10 +01:00
Simon Ser d09abe86c1 backend/drm: drop export_drm_bo
Not used anymore.
2020-12-22 15:53:10 +01:00
Simon Ser dabd2e7207 backend/drm: grab DMA-BUF from wlr_buffer instead of gbm_bo
Get the DMA-BUF directly out of the wlr_buffer instead of relying on the
gbm_bo. This eliminates a roundtrip through GBM.
2020-12-22 15:53:10 +01:00
Simon Ser 83925f04c3 backend/drm: don't save texture in gbm_bo user data
The GBM BO is destroyed when released anyways.
2020-12-22 15:53:10 +01:00
Simon Ser 55b02f753f backend/x11: destroy buffers when destroying output 2020-12-21 16:31:07 +01:00
Simon Ser d6dbdd97e9 backend/x11: re-use pixmaps
Instead of re-importing a buffer each time we submit a frame, re-use the
pixmaps if possible.
2020-12-21 16:31:07 +01:00
Simon Ser defcd9b025 backend/wayland: re-use wl_buffers
Instead of re-importing a buffer each time we submit a new frame, re-use
the wl_buffer objects if possible.
2020-12-21 16:30:47 +01:00
Simon Ser de896caceb backend/wayland: remove EGL config
We don't use EGLSurface anymore, so we don't need to choose an EGL
config anymore.
2020-12-19 21:11:01 +01:00
Ronan Pigott 917ecca58e backend/drm: avoid gcc stringop-truncation warning 2020-12-18 22:19:16 +01:00
Simon Ser 352fdd1bb0
backend/drm: remove unused wlr_drm_plane.drm_format 2020-12-18 11:44:50 +01:00
Simon Ser 248c7787c7 backend/drm: refactor wlr_output destruction
Instead of hand-rolling our own manual wlr_output cleanup function, rely
on wlr_output_destroy to remove an output from the compositor's state.
2020-12-18 10:48:44 +01:00
Simon Ser 019ffe8a5b backend/drm: introduce wlr_drm_connector.name
The DRM backend is a little special when it comes to wlr_outputs: the
wlr_drm_connectors are long-lived and are created even when no screen is
connected.

A wlr_drm_connector only advertises a wlr_output to the compositor when
a screen is connected. As such, most of wlr_output's state is invalid
when the connector is disconnected.

We want to stop using wlr_output state on disconnected connectors.
Introduce wlr_drm_connector.name which is always valid regardless of the
connector status to avoid reading wlr_output.name when disconnected.
2020-12-18 10:48:44 +01:00
Simon Ser c89b131f29 backend/drm: introduce wlr_drm_conn_log
Simplify and unify connector-specific logging with a new
wlr_drm_conn_log macro. This makes it easier to understand which
connector a failure is about, without having to explicitly integrate the
connector name in each log message.
2020-12-18 10:48:44 +01:00
Simon Ser 0aefa18690 backend/x11: send more precise output present events
Instead of sending dummy output present events, use the X11 Present
extension to send more precise events.
2020-12-18 10:37:08 +01:00
Simon Ser 94fda895ac backend/x11: use DRI3Open to get DRM FD
Instead of relying on EGL to retrieve the DRM FD, query it from the
DRI3 extension.

Use the EGL GBM platform, and drop the EGL config.
2020-12-18 10:12:55 +01:00
Simon Ser 1e2c7fce86 backend/drm: use wlr_drm_format_{create,add}
Instead of manually allocating and initializing the structs, use the new
wlr_drm_format helpers.
2020-12-18 09:41:12 +01:00
Simon Ser 253f447329
backend/drm: print DRM device name when scanning connectors 2020-12-17 20:50:19 +01:00
Simon Ser 9cd3f03f65
backend/drm: add wlr_drm_backend.name
Save the DRM device name in a wlr_drm_backend field, so that we can
easily use it for logging purposes.
2020-12-17 20:48:47 +01:00
Simon Ser 60001a75a2
backend/drm: remove nouveau workaround
The workaround is broken because drm_fb_acquire doesn't leave the EGL
context current anymore. We'll need to re-introduce it.

References: https://github.com/swaywm/wlroots/issues/2525
2020-12-17 20:38:02 +01:00
Simon Ser 0dcdb5e7a1 backend/x11: fix DRI3 formats not used
We queried DRI3 formats, but we weren't using them. Because of a typo,
only render formats were used.

Fixes: c59aacf944 ("backend/x11: query modifiers supported by X11 server")
Closes: https://github.com/swaywm/wlroots/issues/2552
2020-12-17 17:02:09 +01:00
Simon Ser 0aa2ba0c03 backend/headless: select the rendering device ourselves
Backends will eventually stop creating their renderer. To prepare for
this, stop using EGL_PLATFORM_SURFACELESS_MESA in the headless renderer.
Pick a render node using libdrm.

The new allocator/renderer creation logic looks very much like what will
end up in common code.
2020-12-16 12:12:36 +01:00
Simon Ser da2a216934
backend/drm: add wlr_drm_connector.backend
This allows the DRM code to have direct access to the wlr_drm_backend
without having to go through an upcast via get_drm_backend_from_backend.
2020-12-15 22:56:14 +01:00
Simon Ser 87bd718de5
backend: use fcntl(F_DUPFD_CLOEXEC) instead of dup
This makes sure the CLOEXEC flag is set on the dup'ed FD.
2020-12-15 20:52:53 +01:00
Simon Ser 1ca4d6b029
backend/drm: dup FD before wlr_gbm_allocator_create
The GBM allocator takes ownership of the DRM FD.
2020-12-15 20:50:04 +01:00
Simon Ser e57a52e7f7
Remove inline keyword
The compiler is smarter at figuring out whether a function should be
inlined or not.
2020-12-15 13:49:42 +01:00
Simon Ser 93cd3a79b2 backend/drm: stop using GBM flags
gbm_bo_create_with_modifiers doesn't take GBM flags, so our
wlr_gbm_allocator interface doesn't either. We were still internally
using GBM flags in the DRM backend, leading to awkward back-and-forth
conversions.

The only flag passed to drm_plane_init_surface was GBM_BO_USE_LINEAR, so
turn that into a bool to make sure other flags can't be passed in.

Move the "force linear" logic out of init_drm_surface, because the
supplied wlr_drm_format should already contain that information.
2020-12-13 13:20:39 +01:00
Simon Ser 525fa6ada0
backend/x11: fix xinput mask mixed up with present
Don't mix xinput and present flags.

Fixes: d79a00bf02 ("backend/x11: switch to wlr_swapchain")
2020-12-13 12:21:21 +01:00
Simon Ser c59aacf944 backend/x11: query modifiers supported by X11 server 2020-12-13 12:16:52 +01:00
Simon Ser d79a00bf02 backend/x11: switch to wlr_swapchain 2020-12-13 12:16:52 +01:00
Simon Ser 16a51bbab2 backend/wayland: query render formats 2020-12-13 12:16:28 +01:00
Simon Ser 441bac139f backend/wayland: use wlr_swapchain for cursor surface 2020-12-13 12:16:28 +01:00
Simon Ser 3923ff005d backend/wayland: use wlr_swapchain for main surface
The cursor surface still uses a wl_egl_window.

References: https://github.com/swaywm/wlroots/issues/1352
2020-12-13 12:16:28 +01:00
Simon Ser 038285d496 backend/wayland: stop rendering black frame on init
Instead of rendering a black frame, schedule a frame event to ask the
compositor to render a proper frame.
2020-12-13 12:16:28 +01:00
Simon Ser 768131e488 output: stop assuming a frame is pending in init
- The DRM backend initially doesn't have a frame scheduled initially.
  However the compositor is expected to set a mode to start the
  rendering loop (frame_pending is set to true in drm_crtc_pageflip).
- The headless and X11 backends have a timer to schedule frames, so they
  ignore this hint completely.
- The Wayland backend renders a fake frame to start the rendering loop.
  It's the only case where a frame is pending on init, move the
  assumption there.
2020-12-13 12:16:28 +01:00
Simon Ser 4c363a564f backend/drm: remove workaround for amdgpu DP MST
Closes: https://github.com/swaywm/wlroots/issues/2533
2020-12-11 23:27:13 +01:00
Simon Ser 6ff478632a backend/drm: remove EGL config
Since we're using wlr_swapchain, we don't need to provide an EGL config.
2020-12-09 14:25:41 +01:00
Simon Ser 06ab41a160
backend/drm: fix missing wlr_drm_format.cap
This caused issues with wlr_drm_format_dup.
2020-12-08 23:32:04 +01:00
Simon Ser eb5886ddbe backend/headless: add support for direct scan-out
I was about to add a check to fail instead of crash when the compositor
uses direct scan-out, but with renderer v6 it's so simple to just add
support for direct scan-out, why bother?

Closes: https://github.com/swaywm/wlroots/issues/2523
2020-12-08 18:57:11 +01:00
Stephane Chauveau b790e5ea34 backend/drm: don't assume possible_crtcs has only one bit set
This isn't necessarily the case [1].

This should fix an assertion failure on Raspberry Pi 4 dual screen.

[1]: https://lists.freedesktop.org/archives/dri-devel/2020-August/275142.html

Closes: https://github.com/swaywm/wlroots/issues/1943
Co-authored-by: Simon Ser <contact@emersion.fr>
2020-12-08 18:38:42 +01:00
Simon Ser 863acb26c0 backend/drm: stop tracking overlay planes
We don't do anything with them. Once we do, we can easily add this back.
2020-12-08 18:38:42 +01:00
Simon Ser e69bbfd0d6 backend/drm: unset current surface before importing
drm_fb_import_wlr may need to change the current EGL context. For
instance by calling drm_fb_clear, which calls wlr_buffer_unlock, which
may destroy a buffer if the cursor swapchain size has changed, which
calls gles2's destroy_buffer, which calls glDeleteFramebuffers.

Closes: https://github.com/swaywm/wlroots/issues/2479
2020-12-08 00:10:57 +01:00
Simon Ser 325cba6414
backend/drm: use EGL_PLATFORM_GBM_KHR
This is just the vendor-agnostic define for the GBM platform. It has the
same value as EGL_PLATFORM_GBM_MESA, so should work with old drivers
that only offer the Mesa-vendored extension too.
2020-12-07 12:06:38 +01:00
Simon Ser bfb59fd4d7 backend/headless: create a config-less EGL context 2020-12-07 11:40:45 +01:00
Ilia Bozhinov 54b7ca56c0 drm: do not unset make/model before emitting destroy event 2020-12-07 10:39:29 +01:00
Simon Ser 90c8452959 backend/session/libseat: set XDG_SESSION_TYPE
libseat will call logind's SetType method if necessary.
2020-12-05 00:14:04 +01:00
Simon Ser 1336ad2a23
backend/drm: remove unused if in drm_connector_move_cursor
We return early if we don't have a plane.
2020-12-04 19:34:35 +01:00
Simon Ser 0e927533b0 backend/drm: query render formats
On some platforms it's possible that the display engine supports
modifiers not supported by the render engine.

Query render formats and intersect them with plane formats to accommodate
for this.
2020-12-03 10:52:25 +01:00
Simon Ser 237c2cf2fb backend/drm: take a wlr_drm_format in init_drm_surface
Instead of taking a format code and wlr_drm_format_set, simplify the
function signature and take a single wlr_drm_format.
2020-12-03 10:52:25 +01:00
Simon Ser 8bc5a92a98 Revert "backend/drm: stop force-probing connectors"
This reverts commit 713c1661b7.

It turns out we do need to force-probe on startup and on hotplug [1].
This is unfortunate, but that's just how the uAPI works. Fixing this
would require patching the kernel.

[1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/289506.html

Closes: https://github.com/swaywm/wlroots/issues/2499
2020-12-01 11:31:03 +01:00
Simon Ser de9ff46629
backend/drm: "scaling mode" is a connector property
It's not a CRTC property. Remove it altogether since it's unused.
2020-11-30 11:57:08 +01:00
Simon Ser 2649600fa1
backend/drm: rotation is a plane property
"rotation" is a plane property, it's not a CRTC property. It was also
missing from plane_info.
2020-11-30 11:57:08 +01:00
Simon Ser c045253927 backend/headless: use a format suitable for rendering
When allocating buffers, use a format suitable for rendering. This
avoids picking a format that won't work.
2020-11-30 11:08:44 +01:00
Simon Ser 6485fadc16
backend/wayland: don't set EGL visual
The Wayland platform doesn't have visuals. By chance,
WL_SHM_FORMAT_ARGB8888 is zero, which means egl_get_config was ignoring
it and everything worked fine.
2020-11-25 13:52:05 +01:00
Simon Ser 713c1661b7 backend/drm: stop force-probing connectors
After discussing with Pekka and Daniel on #dri-devel, we concluded [1]
that user-space shouldn't need to force-probe connectors. Force-probing
can take some time, so using drmModeGetConnectorCurrent can result in
faster start-up.

Users can manually trigger a force-probe if necessary:

    echo detect | sudo tee /sys/class/drm/card0-DP-1/status

Or just by running a tool like drm_info.

A similar change has been submitted to Weston [2].

[1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/287728.html
[2]: https://gitlab.freedesktop.org/wayland/weston/-/issues/437
2020-11-24 15:00:46 +01:00
Simon Ser 154fe8696f backend/x11: log unhandled client messages 2020-11-24 14:57:25 +01:00
Simon Ser f6c36f8881 backend/x11: log unhandled X11 events 2020-11-24 14:57:25 +01:00
Simon Ser 52805feae9 backend/x11: log errors
Register an X11 error handler, and optionally use xcb-errors to print a
detailed message.
2020-11-24 14:57:25 +01:00
Isaac Freund 262740bc9a backend/libseat: fix change_vt return value
This should return true on success and false on failure not vice-versa.
2020-11-24 13:09:13 +01:00
Simon Ser 754179dacd backend/session: add a timeout waiting for GPUs
If a GPU doesn't show up in 10s, bail out and return zero GPUs.
2020-11-19 22:47:49 +01:00
Simon Ser c491a21d25 backend/session/logind: log when using XDG_SESSION_ID
This makes it easier to figure out how wlroots selected the session.
2020-11-19 22:47:49 +01:00
Simon Ser 0e76f92de7 backend/session: replace session_signal with events.active
This is more idiomatic wlroots API. The new name makes it clear that the
signal is emitted when wlr_session.active changes.
2020-11-19 22:47:49 +01:00
Simon Ser cd95d70df0 Revert "session/logind: support CanGraphical property"
We now use udev to wait for DRM card devices.

This reverts commit 3ebf079a9a.
2020-11-19 22:47:49 +01:00
Simon Ser fbf11a41e1 backend/session: wait for DRM device if none found
Wait for a DRM device if none is found in wlr_session_find_gpus. This
can happen if the compositor is loaded before the display kernel driver.

This supersedes the logind CanGraphical property.

To test, e.g. with i915 and sway:

    rmmod -f i915
    sway &
    modprobe i915

Closes: https://github.com/swaywm/wlroots/issues/2093
2020-11-19 22:47:49 +01:00
Simon Ser 76bcddf071 backend/session: introduce wlr_session.events.add_drm_card
This is triggered when a new DRM card is added.

An easy way to test this patch is `modprobe vkms`.
2020-11-19 22:47:49 +01:00
Simon Ser 768fbaad54 backend/session: filter udev events by sysname
We're only interested in card devices. The loop over wlr_session.devices
would take care of ignoring non-card events, but a future patch will
listen to udev "add" events as well.
2020-11-19 22:47:49 +01:00
Simon Ser 44a4792fd8 backend/session: operate on wlr_device
Instead of operating on FDs in {open,close}_device, operate on
wlr_devices. This avoids the device lookup in wlr_session and allows
callers to have access to wlr_device fields.

For now, we use it to remove wlr_session_signal_add and replace it with
a more idiomatic wlr_session.events.change field. In the future, other
events will be added.
2020-11-19 22:47:49 +01:00
Simon Ser 63df2bcbe6 backend/session: don't return FD on failure in open_file
When wlr_session_open_file fails, don't return the FD, otherwise the
caller will think the call succeeded.
2020-11-19 22:47:49 +01:00
Kenny Levinsen fb3bea8014 backend/drm: Use legacy gamma size for legacy backend
We would always return the GAMMA_LUT_SIZE property if available, and
only fall back to legacy gamma size otherwise. This leads to issues if
both are available in differs in size while we use the legacy backend.

Ensure that we only return the legacy size if we're using the legacy
backend.

Closes: https://github.com/swaywm/wlroots/issues/2429
2020-11-19 22:46:25 +01:00
Simon Ser 02df7b7ac8 backend/headless: implement export_dmabuf 2020-11-15 22:54:07 +01:00
Simon Ser 61f8cdfb9e backend/headless: switch to wlr_swapchain 2020-11-15 22:54:07 +01:00
Simon Ser eef8b3dde8 backend/drm: check drm_surface_render_black_frame return value
This avoids hitting an assertion in drm_fb_lock_surface when
we failed to render a black frame.
2020-11-15 22:48:42 +01:00
Simon Ser c881008e1c backend/drm: add support for wlr_swapchain multi-GPU 2020-11-15 22:48:42 +01:00
Simon Ser 8058e338ea backend/drm: get rid of wlr_drm_fb_type
Since all DRM FBs are backed by a wlr_buffer, there's no need for this
anymore.
2020-11-15 22:48:42 +01:00
Simon Ser 68a8d99055 backend/drm: add support for wlr_swapchain buffer age 2020-11-15 22:48:42 +01:00
Simon Ser ef846a8839 backend/drm: use wlr_swapchain 2020-11-15 22:48:42 +01:00
Simon Ser aaa3fcf66f
backend/libinput: require libinput 1.14
We have the policy of requiring up-to-date dependencies instead of
adding conditionals for older versions. libinput 1.14 was published more
than 1 year ago.
2020-11-15 18:57:16 +01:00
Mykola Orliuk 2eae9ec7c8 backend/wayland: Set cursor indivdualy per output 2020-11-12 12:31:32 +01:00
Mykola Orliuk 44531e16e0 backend/wayland: Add active pointer per host seat
Every host seat with pointer capability propagates events to one of
sub-pointer depending which output window we entered.
active_pointer tracks reference to sub-pointer on enter/leave events to
avoid lookup for it on every move events.

Fixes swaywm/wlroots#1499
2020-11-12 12:31:32 +01:00
Mykola Orliuk ce8855ca2a backend/wayland: Bind pointer listener to seat 2020-11-12 12:31:32 +01:00
Mykola Orliuk 07e2e0f60c backend/wayland: Listen to pointers from all seats
This effectively gets swaywm/wlroots#1499 to the point where
functionality somewhat preserved and no crash happens.
We still can have only one cursor, but we can control it from multiple
seats in time-sharing manner by entering/leaving output.
2020-11-12 12:31:32 +01:00
Mykola Orliuk 44c4773d58 backend/wayland: Use seat name in input names 2020-11-12 12:31:32 +01:00
Mykola Orliuk 70ffda3ea3 backend/wayland: Add registering multiple seats 2020-11-12 12:31:32 +01:00
Mykola Orliuk 85b0872650 backend/wayland: Link input devices with seats 2020-11-12 12:31:32 +01:00
Mykola Orliuk 40bfd9f8f7 backend/wayland: Bind seat listener to wlr_wl_seat 2020-11-12 12:31:32 +01:00
Isaac Freund e06c9e43af Remove unneeded includes from wlr_input_device.h
This uncovered many places where we were using things without directly
including them.
2020-11-11 15:40:47 +01:00
Isaac Freund 7693f61d81 Replace wlr_key_state with wl_keyboard_key_state
There's no reason to have duplicate enums
2020-11-11 10:58:38 +01:00
Simon Ser 1328477a82 backend/drm: export pending FB in export_dmabuf, if any
This allows callers to grab the current frame right after committing it,
without having to incur a full vblank worth of latency.
2020-11-05 09:43:42 +01:00
Simon Ser ee43ef3c9d backend/drm: fix "a page-flip is already pending" errors on modeset
When performing a modeset, the DRM backend will request a page-flip
event. However frame_pending wasn't set to true, so any subsequent
wlr_output_schedule_frame calls would imemdiately trigger a synthetic
frame event, asking the compositor to submit a new frame. Committing the
new frame fails with "a page-flip is already pending" error in the DRM
backend.
2020-11-03 08:09:54 +01:00
Marten Ringwelski 85757665e6 backend/drm: Check if output is enabled before sending frame event
When an output is disabled one last pageflip will happen to disable it.
Currently this pageflip causes a frame event.
Since the output is disabled we don't want to send this frame event.
2020-10-30 10:04:54 +01:00
Mykola Orliuk 31aa7f4c95 backend/wayland: fix some keyboard/touch leaks 2020-10-18 21:25:25 +02:00
Mykola Orliuk 009cd634a2 backend/wayland: fix input creation error handling 2020-10-18 21:25:25 +02:00
Mykola Orliuk 41bf1c6871 backend/wayland: add error flow in create_wl_seat 2020-10-18 21:25:25 +02:00
Mykola Orliuk 1ac5257357 backend/wayland: factor out wlr_wl_seat 2020-10-18 16:28:12 +02:00
Mykola Orliuk df417b7e95 backend/wayland: manage cursor for current pointer 2020-10-18 16:28:12 +02:00
Ilia Bozhinov b98522b38f
backend/wayland: add touch support to the wayland backend
Goal currently is to get support working for a single output, thus there is only one touch device created.

Multi-output support is left for later.
2020-10-18 15:33:03 +02:00
Simon Ser 45c1a3621c backend/libinput: improve logger callback
- Add a prefix to make it clear log messages come from libinput
- Properly convert libinput log priority to wlroots'
2020-10-10 10:51:32 -04:00
Simon Ser 87836dcb55 backend: remove check for _WAYLAND_DISPLAY
I'm not sure what this was used for, but it's not used by libwayland.
Setting _WAYLAND_DISPLAY would result in the Wayland backend being
picked but would ignore the actual value of the env variable.
2020-09-16 15:53:14 -04:00
nerdopolis e44bed0c2b Accommodate for CONFIG_VT=0, all TTYs are in seat0, but not all
seat0s have TTYs
2020-09-04 11:46:54 +02:00
Patrick Steinhardt fa05d3cde6 session: Don't refuse unprivileged creation of "direct" backend
When starting a compositor that's using the "direct" session backend,
wlroots needs to handle calls to `drmSetMaster()` and `drmDropMaster()`.
As both calls used to require `CAP_SYS_ADMIN`, wlroots thus simply
refused starting in case the process doesn't enjoy evelated privileges.

Permission rules have changed since linux.git commit 45bc3d26c95a (drm:
rework SET_MASTER and DROP_MASTER perm handling, 2020-03-19). As a
result, starting with Linux v5.8, both ioctls will now also succeed if
the process is currently or has been the DRM master. And as the first
process to open render nodes will become the DRM master automatically,
this effectively means that process elevation is not strictly required
in all setups anymore.

So let's drop the `geteuid() != 0` permission check to allow those new
rules to do their magic.
2020-09-04 11:39:25 +02:00
Ilia Bozhinov efe6414640 wayland: emit relative pointer events only for current pointer 2020-09-04 10:13:35 +02:00
Ryan Walklin 28cedb5623 Quieten failure to set login session type
(almost certainly due to systemd version <246)
2020-09-02 11:35:32 +02:00
Simon Ser 971de474f0 backend/session/libseat: register log handler
Route libseat errors through wlroots logging infrastructure.

This requires libseat 0.2.0.
2020-09-01 12:09:25 +02:00
Kenny Levinsen 330c50b48d session: Add missing init to direct-freebsd
bad1e9afa8 ("session: Add libseat backend") introduced a change to to
how session backends initialize, but failed to update the FreeBSD
specific version of the direct backend accordingly.

Closes: https://github.com/swaywm/wlroots/issues/2376
2020-08-26 22:56:54 +02:00
Simon Ser 297354f847 Remove unnecessary wl_display_dispatch calls
wl_display_roundtrip already takes care of dispatching the display.
2020-08-24 07:55:35 -06:00
Kenny Levinsen bad1e9afa8 session: Add libseat backend 2020-08-24 11:13:55 +02:00
Ilia Bozhinov 9feeb2738d
backend/wayland: destroy relative pointer when output is disconnected
Fixes #2243
Fixes #2106
2020-08-17 11:33:57 +02:00
Ryan Walklin 7e990a2991 Don't set XDG_SESSION_TYPE unless logind SetType succeeds 2020-08-07 19:15:25 +02:00
Ryan Walklin e81d2086c0 Also set XDG_SESSION_TYPE 2020-08-07 19:15:25 +02:00
Ryan Walklin f0d03fb892 Implement logind session SetType method to change session type to wayland 2020-08-07 19:15:25 +02:00
Devin J. Pohly aaf490d794 drm: fix uninitialized read
get_drm_prop_blob does not set path_len if it returns NULL.  Check the
return value before path_len to avoid reading uninitialized memory.

(Granted, this doesn't change the logic at all, but it does make
Valgrind a bit happier.)
2020-07-31 09:32:14 +02:00
Antonin Décimo d9bb792794 Fix incorrect format parameters 2020-07-27 10:49:19 +02:00
Simon Ser b6377b59ff backend/drm: check drm_surface_make_current return value
drm_connector_set_cursor wasn't checking the return value of the
drm_surface_make_current call. On failure, this results in a failed
assertion in wlr_renderer_begin (because no rendering context is
current).
2020-07-07 11:18:07 -06:00
Simon Ser cccca368c5
backend/drm: fix typo in drm_surface_make_current arg 2020-07-07 17:36:51 +02:00
Simon Ser f82a27f55a backend/drm: fix DPMS on legacy interface
This mirrors what the atomic code does in create_mode_blob.

Closes: https://github.com/swaywm/wlroots/issues/2312
2020-07-02 09:39:41 -06:00
Simon Ser c930160286 backend/noop: add missing rollback_render output impl
3c5dbfd97c ("output: make rollback_render mandatory") makes a no-op
output init fail without this function.
2020-06-19 13:07:24 -06:00
Simon Ser bf93d2e67c output: rename impl->rollback to rollback_render
The output backend API is now mostly state-less thanks to the atomic
hooks (commit and test). There is one exception though: attach_render.
This function makes the rendering context current. However sometimes the
compositor might decide not to render after attach_render (e.g. when
there's nothing new to render to the back buffer). Thus
wlr_output_rollback has been introduced to revert the pending state.

Because the output backend API is mostly state-less, the only thing
wlr_output_impl.rollback needs to do is revert the current rendering
context. Rename the function to rollback_render to make this clear. Add
a check in the common wlr_output code to only call rollback_render when
attach_buffer has been previously called.

On the long term, we'll be able to remove attach_render and
rollback_render together.
2020-06-19 11:50:42 -06:00
Andri Yngvason a6a5a19356 backend: drm: Fix dmabuf resource leak 2020-06-13 15:39:49 +02:00
Simon Ser e77c046cf9 backend/drm: fix stack overflow in dealloc_crtc
Call drm_crtc_commit directly instead of calling drm_connector_set_mode.
This restores the previous behaviour where conn_enable was called [1].

[1]: 0c7c562482/backend/drm/drm.c (L1093)

Closes: https://github.com/swaywm/wlroots/issues/2253
2020-06-08 10:13:00 -06:00
Tudor Brindus dc13bb827d util: fix and move `get_current_time_msec` into a util file
This commit makes `get_current_time_msec` correctly return milliseconds
as opposed to microseconds. It also considers the value of `tv_sec`, so
we don't lose occasionally go back in time by one second. Finally, the
function is moved into `util/time.cc` so that it can be reused elsewhere
without having to consider these pitfalls.
2020-06-06 00:09:19 +02:00
Simon Ser 8f28f5b2f8 backend/drm: fix black screens when enabling output
This patch fixes this failure:

    01:57:16.642 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
    01:57:16.684 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
    01:57:16.684 [ERROR] [backend/drm/drm.c:732] Failed to initialize renderer on connector 'eDP-1': initial page-flip failed
    01:57:16.684 [ERROR] [backend/drm/drm.c:805] Failed to initialize renderer for plane
    01:57:16.684 [sway/config/output.c:423] Failed to commit output eDP-1

References: https://github.com/swaywm/sway/issues/5101
2020-06-03 10:27:21 -06:00
Simon Ser 019fe8bb7e backend/wayland: fix spurious eglSwapBuffers failures
This was introduced in [1]. However after reverting that PR I still
can't reproduce the bug the PR aimed to fix [2].

Since there's no good explanation why we would need to swap buffers
before resizing, let's just revert the PR.

[1]: https://github.com/swaywm/wlroots/pull/1486
[2]: https://github.com/swaywm/wlroots/issues/1371

Closes: https://github.com/swaywm/wlroots/issues/1768
2020-06-02 14:14:08 -06:00
Tudor Brindus 47a30957d1 backend/wayland: scale tablet tool position into [0, 1] range
Fixes #2233.
2020-06-01 22:36:46 +02:00
Simon Ser b03eebf7d4 backend/drm: always perform a CRTC commit in drm_connector_commit
When the mode, status or buffer hasn't changed, drm_connector_commit was
a no-op. Because of this individual changes to the gamma LUT or adaptive
sync status were ignored (if committed without a buffer).

Instead, perform a commit to apply the changes.
2020-06-01 11:45:11 -06:00
Simon Ser 1a2e82e327 backend/drm: drop extra wlr_output_update_enabled call
drm_connector_set_mode already takes care of keeping this up-to-date.
2020-06-01 11:45:11 -06:00
Simon Ser 80467f6ae8 backend/drm: commit/rollback FBs in drm_crtc_commit
We need to perform the FB bookkeeping on all commits, not just on
page-flips.
2020-06-01 11:45:11 -06:00
Simon Ser 70f3a0bb27 backend/drm: make adaptive_sync atomic
Stop using drmModeObjectSetProperty, set the property in the crtc_commit
function instead.
2020-06-01 11:45:11 -06:00
Simon Ser 42126c2022 backend/drm: rollback pending CRTC state on test commit
A test commit doesn't apply the pending state.

The CRTC state will be populated again if the compositor decides to
perform a regular commit afterwards.
2020-06-01 11:45:11 -06:00
Simon Ser 1a23c1425f Add comments for missing tablet tool entries
And stop using default cases, so that we know which parts of the code
need an update when adding a new enum entry.

Closes: https://github.com/swaywm/wlroots/issues/2208
2020-05-28 15:13:05 +02:00
Simon Ser d66b9966e9 backend/drm: fix missing crtc->cursor NULL check
Fixes: cdb6fdbc6c ("backend/drm: remove missing cursor plane workaround")
2020-05-27 21:01:20 +02:00
Simon Ser e7a8ea84c3 backend/drm: don't set cursor if off-screen
Closes: https://github.com/swaywm/wlroots/issues/2216
2020-05-27 21:01:20 +02:00
Simon Ser 15d8f1806e backend/drm: introduce pending and current CRTC state
Previously, we only had the pending state (crtc->pending, crtc->mode and
crtc->active). This causes issues when a commit fails: the pending state
is left as-is, and the next commit may read stale data from it.

This will also cause issues when implementing test-only commits: we need
to rollback the pending CRTC state after a test-only commit.

Introduce separate pending and current CRTC states. Properly update the
current state after a commit.
2020-05-26 23:34:37 +02:00
Simon Ser d6cc718472 backend/drm: nuke retry_pageflip
retry_pageflip is now dead code, since drm_connector_start_renderer
isn't called anymore. It was previously called when enabling an output.
The name "retry_pageflip" was a little confusing because the function
retried a modeset and the timer wasn't set up while performing a simple
page-flip.

Let's just remove this altogether for now. We can discuss whether it's
worth it to bring it back. Should we only do it on failed page-flips?
Should we only do it on EBUSY?
2020-05-26 23:34:37 +02:00
Simon Ser 61095f4a12 backend/drm: make drm_connector_set_mode take a wlr_drm_connector
Since this is an internal DRM backend function, there's no reason we
need to take a generic wlr_output.
2020-05-26 23:34:37 +02:00
Simon Ser 445750aa9a backend/drm: remove enable_drm_connector
Merge enable_drm_connector into drm_connector_set_mode. This allows us
to de-duplicate logic since enabling an output performs a modeset.
2020-05-26 23:34:37 +02:00
Simon Ser c02e9c2bb1 backend/drm: remove drm_connector_set_custom_mode
Replace it with a function that returns the pending mode.
2020-05-26 23:34:37 +02:00
Simon Ser 21c6cc5e4c backend/drm: refuse to enable an output without a mode 2020-05-26 20:10:55 +02:00
Simon Ser 47e5212823 backend/drm: rollback atomic blobs
If the atomic commit fails or is test-only, rollback
wlr_drm_crtc.{mode_id,gamma_lut} blob IDs to their previous value. This
prevents the next commits from failing or applying test-only state.
2020-05-26 20:01:38 +02:00
Simon Ser af2f69e6c1 render/egl: unset current context after swapping buffers
After swapping buffers, it doesn't make sense to perform more rendering
operations. Unset the context to reflect this.

This commit makes it so the context is always only current between
wlr_egl_make_current and wlr_egl_swap_buffers.

This is an alternative to [1].

[1]: https://github.com/swaywm/wlroots/pull/2212
2020-05-20 17:39:34 +02:00
Simon Ser d28a7da95d backend/drm: add missing wlr_egl_unset_current 2020-05-19 21:32:38 +02:00
Simon Ser cfed5766b7 backend/drm: fix current EGL context on multi-GPU
get_tex_for_bo changes the current EGL context. Rendering operations
must immediately follow drm_surface_make_current.

Closes: https://github.com/swaywm/wlroots/issues/2209
2020-05-19 21:32:38 +02:00
Simon Ser 1edc42157b render/egl: introduce wlr_egl_unset_current
This function can be called after wlr_egl_make_current to cleanup the
EGL context. This avoids having lingering EGL contexts that make things
work by chance.

Closes: https://github.com/swaywm/wlroots/issues/2197
2020-05-19 14:56:20 +02:00
Simon Ser 781ed1ff02 Fix -Wreturn-type warnings
When calling assert(0) instead of returning a value, -Wreturn-type
warnings are triggered because assertions can be disabled. Replace these
assertions with abort().
2020-05-19 14:54:02 +02:00
Simon Ser 2988ebb6f3 backend/drm: fix atomic commits when the GAMMA_LUT prop is missing
We already have the logic to fallback to the legacy interface above. We
just need to avoid calling atomic_add with a zero prop ID.

Closes: https://github.com/swaywm/wlroots/issues/2187
2020-05-14 23:55:43 +00:00
Simon Ser 347bdb6d9a output: make wlr_output_set_gamma atomic
wlr_output_set_gamma is now double-buffered and applies the gamma LUT on
the next output commit.
2020-05-14 20:09:28 +02:00
Simon Ser 42e485dcc3 backend/drm: fix segfault in drm_crtc_page_flip
When no cursor plane is available, drm_crtc_page_flip would segfault.
2020-05-14 10:20:37 +02:00
Simon Ser 51bbf31742 backend/drm: print error in set_plane_props
This makes it easier to understand which plane failed.
2020-05-12 15:12:22 +02:00
Simon Ser 9412d34e2d backend/drm: disable cursor in dealloc_crtc
dealloc_crtc was destroying GBM surfaces, but the cursor_enabled flag
was left as-is. When re-enabling the output, atomic_crtc_pageflip would
try enabling the cursor plane, but would fail because no framebuffer is
available.

Closes: https://github.com/swaywm/wlroots/issues/2150
2020-05-12 15:12:22 +02:00
Simon Ser da4df82532 backend/drm: fix combined modeset+enable commits
When an output is enabled and modeset at the same time,
drm_connector_commit would first try to modeset then try to commit. This
won't work because both will trigger a page-flip. KMS will reject that.

Change the logic to only enable an output if no modeset has been
requested. The logic in wlr_output already checks that the user isn't
doing a modeset and disabling the output at the same time.
2020-05-12 15:12:06 +02:00
Simon Ser cdb6fdbc6c backend/drm: remove missing cursor plane workaround
We have a workaround for legacy drivers that support drmModeSetCursor
without exposing a cursor plane. It doesn't work anymore now that we've
moved to a more atomic interface.

Let's just remove this workaround and fallback to software cursors.

Closes: https://github.com/swaywm/wlroots/issues/2166
2020-05-12 08:57:13 +02:00
JonnyMako 1139234117
backend/drm: fix missing cursor on external monitors with multi-GPU setup and nouveau
We need to make the multi-GPU surface current before the glFinish call.

Closes: https://github.com/swaywm/sway/issues/5319
2020-05-11 08:51:41 +02:00
Simon Ser f72686c0b6 backend/drm: fix crash in session_signal
conn->crtc is NULL in case the output is disabled.

However, the DRM backend will set the GAMMA_LUT property anyway. On each
commit the whole state is sent to KMS. Adding WLR_DRM_CRTC_GAMMA_LUT to
the pending state would just make the backend re-create the blob
containing the gamma LUT.
2020-05-10 12:07:05 +02:00
Simon Ser 2ca3bdc35e backend/drm: simplify atomic commit logic
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.

This is also groundwork for supporting wlr_output_test properly.
2020-05-10 09:21:04 +02:00
Simon Ser 06d5aa5780 backend/drm: GAMMA_LUT_SIZE isn't atomic
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.

It's no guaranteed to exist though, so we still need to keep the
fallback.
2020-05-10 09:20:46 +02:00
Simon Ser da63d11d34 backend/drm: remove crtc_set_cursor from interface 2020-05-09 16:42:25 +02:00