There were three places initializing a token:
- wlr_xdg_activation_v1_add_token
- wlr_xdg_activation_token_v1_create
- activation_handle_get_activation_token
The initialization of the token.destroy was missing in the first one. To
prevent these functions from getting out of sync move the token creation
into a common function.
Fixes 4c59f7d4 ("xdg-activation: Allow to submit tokens")
This commit fixes a regression introduced in
511f137f8f where GTK tooltips wouldn't be
unconstrained due to no gravity on x axis being set, in which case the
behavior is ambiguous, by sliding to the right/bottom.
This fixed adaptive sync issues with wlr_scene. Scenes don't check
if the damage region intersects with an output when calling
wlr_output_damage_add.
This is especially important for multi output.
The destroy callback in wlr_touch_impl has been removed. The function
`wlr_touch_finish` has been introduced to clean up the resources owned by a
wlr_touch.
`wlr_input_device_destroy` no longer destroys the wlr_touch, attempting to
destroy a wlr_touch will result in a no-op.
The field `name` has been added to the wlr_touch_impl to be able to identify
a given wlr_touch device.
The destroy callback in wlr_tablet_tool_impl has been removed. The function
`wlr_tablet_tool_finish` has been introduced to clean up the resources owned by
a wlr_tablet_tool.
`wlr_input_device_destroy` no longer destroys the wlr_tablet_tool, attempting to
destroy a wlr_tablet_tool will result in a no-op.
The field `name` has been added to the wlr_tablet_tool_impl to be able to
identify a given wlr_tablet_tool device.
The destroy callback in wlr_tablet_pad_impl has been removed. The function
`wlr_tablet_pad_finish` has been introduced to clean up the resources owned by a
wlr_tablet_pad.
`wlr_input_device_destroy` no longer destroys the wlr_tablet_pad, attempting to
destroy a wlr_tablet_pad will result in a no-op.
The field `name` has been added to the wlr_tablet_pad_impl to be able to identify
a given wlr_tablet_pad device.
The destroy callback in wlr_switch_impl has been removed. The function
`wlr_switch_finish` has been introduced to clean up the resources owned by a
wlr_switch.
`wlr_input_device_destroy` no longer destroys the wlr_switch, attempting to
destroy a wlr_switch will result in a no-op.
The field `name` has been added to the wlr_switch_impl to be able to identify
a given wlr_switch device.
The destroy callback in wlr_pointer_impl has been removed. The function
`wlr_pointer_finish` has been introduced to clean up the resources owned by a
wlr_pointer.
`wlr_input_device_destroy` no longer destroys the wlr_pointer, attempting to
destroy a wlr_pointer will result in a no-op.
The field `name` has been added to the wlr_pointer_impl to be able to identify
a given wlr_pointer device.
The destroy member in wlr_keyboard_impl has been removed. The function
`wlr_keyboard_finish` has been introduce to clean up the resources owned by a
wlr_keyboard.
`wlr_input_device_destroy` no longer destroys the wlr_keyboard, attempting to
destroy a wlr_keyboard will result in a no-op.
The field `name` has been added to the wlr_keyboard_impl to be able to identify
a given wlr_keyboard device.
To be consistent with other wlr_xdg_* structs,
wlr_xdg_positioner_resource is renamed to wlr_xdg_positioner and made
public, and wlr_xdg_positioner is renamed to wlr_xdg_positioner_rules.
Functions which operated on wlr_xdg_positioner were renamed and updated
accordingly.
In case the `wlr_input_device` is not owned by a specialized input device, the
function will finish the wlr_input_device and call it's implementation destroy
function if an implementation has been supplied, or simply free it.
When calling wlr_output_test an empty buffer might be created. This implicitly
changes the pending state of the output. Ensure that such a change is only
temporarily and clear such an empty buffer before returning the test result.
I am running a custom compiled version of chromium with a patch to get
it up and running on sway git at the moment, and in that development
build I compiled there is a bug where the browser will crash if you
try to open a file select dialog. When this crash happens, chromium will
not close, but instead will remain open and impossible to close unless
you send a SIGKILL signal to the process. However, sway will crash to
tty when you send the SIGKILL.
I have a hunch that when chromium is opening the file select dialog
it is creating some sort of a xdg toplevel surface. But it freezes
before it fully initializes the surface. When the SIGKILL signal is
given, sway/wlroots will try to free the xdg_toplevel surface but
because it hasn't fully initialized due to the frozen window, it
segfaults.
Don't be fooled by the assert, the assert is not firing, the surface
pointer is indeed NULL here.
* thread #1, name = 'sway', stop reason = signal SIGSEGV: invalid address (fault address: 0x28)
frame #0: 0x00007ffff78b9041 libwlroots.so.11`wlr_xdg_toplevel_set_parent(surface=0x0000000000000000, parent=0x0000000000000000) at wlr_xdg_toplevel.c:159:37
156
157 void wlr_xdg_toplevel_set_parent(struct wlr_xdg_surface *surface,
158 struct wlr_xdg_surface *parent) {
-> 159 assert(surface->role == WLR_XDG_SURFACE_ROLE_TOPLEVEL);
160 assert(!parent || parent->role == WLR_XDG_SURFACE_ROLE_TOPLEVEL);
161
162 if (surface->toplevel->parent) {
(lldb) up
error: sway {0x0003442a}: DIE has DW_AT_ranges(DW_FORM_sec_offset 0x67) attribute, but range extraction failed (invalid range list offset 0x67), please file a bug and attach the file at the start of this error message
error: sway {0x0003442a}: DIE has DW_AT_ranges(DW_FORM_sec_offset 0x67) attribute, but range extraction failed (invalid range list offset 0x67), please file a bug and attach the file at the start of this error message
frame #1: 0x00007ffff78e176e libwlroots.so.11`destroy_imported(imported=0x000055555626d570) at wlr_xdg_foreign_v1.c:154:3
151 wl_list_for_each_safe(child, child_tmp, &imported->children, link) {
152 struct wlr_xdg_surface *xdg_child =
153 wlr_xdg_surface_from_wlr_surface(child->surface);
-> 154 wlr_xdg_toplevel_set_parent(xdg_child, NULL);
155 }
156
157 wl_list_remove(&imported->exported_destroyed.link);
(lldb) up
frame #2: 0x00007ffff78e1b9d libwlroots.so.11`xdg_imported_handle_resource_destroy(resource=0x00005555562555a0) at wlr_xdg_foreign_v1.c:280:2
277 struct wl_resource *resource) {
278 struct wlr_xdg_imported_v1 *imported = xdg_imported_from_resource(resource);
279 if (!imported) {
-> 280 return;
281 }
282
283 destroy_imported(imported);
(lldb) up
frame #3: 0x00007ffff794989a libwayland-server.so.0`___lldb_unnamed_symbol211 + 154
libwayland-server.so.0`___lldb_unnamed_symbol211:
-> 0x7ffff794989a <+154>: andl $0x1, %r13d
0x7ffff794989e <+158>: je 0x7ffff79498b0 ; <+176>
0x7ffff79498a0 <+160>: addq $0x8, %rsp
0x7ffff79498a4 <+164>: movl $0x1, %eax
(lldb) up
frame #4: 0x00007ffff794fec0 libwayland-server.so.0`___lldb_unnamed_symbol290 + 64
libwayland-server.so.0`___lldb_unnamed_symbol290:
-> 0x7ffff794fec0 <+64>: cmpl $0x1, %eax
0x7ffff794fec3 <+67>: jne 0x7ffff794fed3 ; <+83>
0x7ffff794fec5 <+69>: addq $0x8, %rbx
0x7ffff794fec9 <+73>: cmpq %rbx, %r13
(lldb) up
frame #5: 0x00007ffff79503e0 libwayland-server.so.0`___lldb_unnamed_symbol300 + 32
libwayland-server.so.0`___lldb_unnamed_symbol300:
-> 0x7ffff79503e0 <+32>: cmpl $0x1, %eax
0x7ffff79503e3 <+35>: je 0x7ffff79503f0 ; <+48>
0x7ffff79503e5 <+37>: popq %rbx
0x7ffff79503e6 <+38>: popq %r12
(lldb) up
frame #6: 0x00007ffff794a30e libwayland-server.so.0`wl_client_destroy + 126
libwayland-server.so.0`wl_client_destroy:
-> 0x7ffff794a30e <+126>: movq %r12, %rdi
0x7ffff794a311 <+129>: callq 0x7ffff7950150 ; ___lldb_unnamed_symbol293
0x7ffff794a317 <+135>: movq 0x8(%rbp), %rdi
0x7ffff794a31b <+139>: callq *0xdc77(%rip)
(lldb) up
frame #7: 0x00007ffff794a3f7 libwayland-server.so.0`___lldb_unnamed_symbol214 + 119
libwayland-server.so.0`___lldb_unnamed_symbol214:
-> 0x7ffff794a3f7 <+119>: movq 0x28(%rsp), %rax
0x7ffff794a3fc <+124>: subq %fs:0x28, %rax
0x7ffff794a405 <+133>: jne 0x7ffff794a727 ; <+935>
0x7ffff794a40b <+139>: addq $0x38, %rsp
(lldb) up
frame #8: 0x00007ffff794d1ca libwayland-server.so.0`wl_event_loop_dispatch + 202
libwayland-server.so.0`wl_event_loop_dispatch:
-> 0x7ffff794d1ca <+202>: addq $0xc, %r15
0x7ffff794d1ce <+206>: cmpq %r15, %rbp
0x7ffff794d1d1 <+209>: jne 0x7ffff794d1b8 ; <+184>
0x7ffff794d1d3 <+211>: movq 0x8(%rsp), %rcx
(lldb) up
frame #9: 0x00007ffff794ad37 libwayland-server.so.0`wl_display_run + 39
libwayland-server.so.0`wl_display_run:
-> 0x7ffff794ad37 <+39>: movl 0x8(%rbx), %eax
0x7ffff794ad3a <+42>: testl %eax, %eax
0x7ffff794ad3c <+44>: jne 0x7ffff794ad20 ; <+16>
0x7ffff794ad3e <+46>: popq %rbx
(lldb) up
frame #10: 0x000055555557689a sway`server_run(server=0x00005555555f26c0) at server.c:307:2
304 wlr_backend_destroy(server->backend);
305 return false;
306 }
-> 307
308 return true;
309 }
310
(lldb) up
frame #11: 0x0000555555575a93 sway`main(argc=3, argv=0x00007fffffffe978) at main.c:431:2
428 swaynag_show(&config->swaynag_config_errors);
429 }
430
-> 431 server_run(&server);
432
433 shutdown:
434 sway_log(SWAY_INFO, "Shutting down sway");
The wlroots APIs currently don't allow importing/uploading a buffer
during rendering operations. Scene-graph buffer nodes need to turn
their wlr_buffer into a wlr_texture at some point. It's not always
possible to do so at wlr_scene_buffer creation time because the
scene-graph may have zero outputs at this point, thus no way to
grab a wlr_renderer.
Instead, add scene-graph buffers to a pending list and try to import
them in wlr_scene_output_commit.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3354
Commit 498f30aad1 changed the logic of
get_mapping() in types/wlr_cursor.c to use updated version of
wlr_output_layout_get_box(). However, the case where c_device isn't NULL
but doesn't have output or geometry mappings wasn't handled properly,
resulting in leaving the output value uninitialized. This commit fixes
`c_device != NULL` branch by returning from the function only when a
mapping is found.
Fixes https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3369
wl_subsurface::set_desync description states: "If cached state exists when
wl_surface.commit is called in desynchronized mode, the pending state is
added to the cached state, and applied as a whole."
This commit reintroduces an implementation of said behavior, previously
removed in 7daf6da9ac05be2cb74c0983e3caee0b21db75d4.
Strictly speaking, this logic isn't fully correct, as the cached state
and the pending state are applied individually instead, if the cached
state isn't locked by anything else. However, the end result is still
the same.
This commit fixes the issue with Firefox permission popups.
wp_viewporter protocol doesn't seem to say anything about damage, but
Firefox assumes that wp_viewport::set_source alone is enough to damage
the whole surface, and that assumption kinda makes sense, so let's do
that.
Currently the output enter event is never sent if the client has not
yet bound the output, which happens every time the compositor creates a
new output.
To fix this, listen for the output bind event and inform clients as
if needed.
This commit renames map/unmap listeners to clarify that they handle
subsurface events, and ensures the node is always destroyed before
the subsurface.
Without this patch, wl_list_remove() would operate on listener links in
already freed memory. glibc is usually lenient to bugs like this, but
musl isn't.
Allows the compositor to submit tokens to the pool of
currently active tokens. This can be useful when the
launcher doesn't use or support xdg-activation-v1 by
itself - e.g. when it is X11 based or use gtk_shell1.
This doesn't work if scene outputs are not used as the primary output of
scene surfaces will always be NULL.
Therefore, take a wlr_scene_output instead of separate wlr_scene and
wlr_output arguments and rename the function to
wlr_scene_output_send_frame_done().
The actual behavior of the function is unchanged.
This allows compositors to avoid sending multiple frame done events
to a surface that is rendered on multiple outputs at once. This may
also be used in the same way for presentation feedback.
wlroots picks names for all outputs, but it might be desirable for
compositor to override it.
For instance, Sway will use a headless output as a fallback in
case no outputs are connected. Sway wants to clearly label the
fallback output as such and label "real" headless outputs starting
from HEADLESS-1.
Implement a basic version of linux-dmabuf-unstable-v1 version 4.
Only default hints are implemented.
The new wlr_linux_dmabuf_feedback_v1 data structure will allow
compositors to define their own custom hints in the future. This
data structure makes it easy to describe feedback metadata.
It's converted to a "compiled" form suitable for marshalling over
the Wayland socket via feedback_compile.
This allows output commit listeners to access the newly committed
buffer. Currently wlr_output.front_buffer is used but it'll get
removed in the next commit.
DRM formats with an empty modifier list are invalid. Instead of
emptying the list, reduce it to { INVALID }.
Add a check to make sure the renderer and backend support implicit
modifiers, so that we don't fallback on e.g. Vulkan.
Closes: https://github.com/swaywm/sway/issues/6692
This allows getting a wlr_scene_output from a wlr_output. Since an
output can only be added once to a scene-graph there's no ambiguity.
This is useful for compositors using wlr_scene_attach_output_layout:
the output layout integration automatically creates a scene-graph
output for each wlr_output added to the layout.
This allows compositors to get primary formats without manually
calling wlr_output_impl.get_primary_formats.
For example, the Sway patch for linux-dmabuf feedback [1] needs
this.
[1]: https://github.com/swaywm/sway/pull/6313
Sometimes we were calling wlr_output_impl.set_cursor with a NULL
buffer, but we weren't clearing wlr_output.cursor_front_buffer.
Avoid leaving a dangling buffer behind.
Introduce a helper function output_set_hardware_cursor which calls
wlr_output_impl.set_cursor and keeps cursor_front_buffer in sync.
The implicit check to filter out LINEAR for dmabuf checked for INVALID
twice instead of checking for INVALID & LINEAR. Fix this.
Fixes: d37eb5c2ea ("linux-dmabuf-v1: filter out LINEAR if implicit")
Reported-by: Dawid Czeluśniak <czelusniakdawid@gmail.com>
If only INVALID and LINEAR are valid modifiers, we need to filter out
LINEAR since Xwayland won't be able to allocate a BO with the explicit
linear modifier on hardware that does not support explicit modifiers.
The addition of LINEAR is an internal implementation detail which
simplifies the wlroots architecture for now.
Evntually Xwayland should be fixed to filter out modifiers that are not
supported by the GBM implementation, see [1]. This could be done by
querying EGL for the supported modifiers.
[1]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1166
This allows compositors to easily add an xdg_surface to the
scene-graph while retaining the ability to unconstraint popups
and decide their final position.
Compositors can handle new popups with the wlr_xdg_shell.new_surface
event, get the parent scene-graph node via wlr_xdg_popup.parent.data,
create a new scene-graph node via wlr_scene_xdg_surface_tree_create,
and unconstraint the popup if they want to.
The parameters are used when the client is in the process of
building a buffer. There's no reason why this internal
implementation detail should be exposed in our public header.
All graphics drivers supporting cursor planes support ARGB8888,
the default cursor format, so this fallback is almost certainly
unused.
Essentially all cursor themes use alpha transparency to make it
clearer where relative to the screen content the cursor hotspot is.
It is better to fall back to a slightly slower software cursor than
it is to fall back to the opaque square that is a hardware cursor
without an alpha channel.
This change introduces new double buffered state to the wlr_output,
corresponding to the buffer format to render to.
The format being rendered to does not control the bit depth of colors
being sent to the display; it does generally determine the format with
which screenshot data is provided. The DRM backend _may_ sent higher
bit depths if the render format depth is increased, but hardware and
other limitations may apply.
Most (and possibly all) compositors using wlroots only ever render
fully opaque content. To provide better performance, this change
switches the default format used by wlr_output buffers from
ARGB8888 to the opaque XRGB8888.
Compositors like mutter, kwin, and weston already default to
XRGB8888, so this change is unlikely to expose any new bugs in
underlying drivers and hardware.
This does not affect the hardware cursor's buffer format, which is
still ARGB8888 by default.
As part of this change, the X11 backend (which does not support
changing format at runtime) now picks a true color, 24 bit depth
visual (i.e. XRGB8888) instead of a 32 bit depth (ARGB8888) one.
This makes it possible for the two functions using output_pick_format
(output_pick_cursor_format and output_create_swapchain) to select
different buffer formats.
The backend and renderer don't directly interact together, so there's
no point in checking that their buffer caps intersect. What we want to
check is that:
- The backend and allocator buffer caps are compatible, because the
backend consumes buffers to display them.
- The renderer and allocator buffer caps are compatible, because the
renderer imports buffers to sample them or render to them.
For instance, when running with the DRM backend and the Pixman renderer,
the (backend & renderer) check will fail because backend = DMABUF and
renderer = DATA_PTR.
They are never used in practice, which makes all of our flag
handling effectively dead code. Also, APIs such as KMS don't
provide a good way to deal with the flags. Let's just fail the
DMA-BUF import when clients provide flags.
We were send a protocol error if INTERLACED or BOTTOM_FIRST was
set. This is incorrect for the zwp_linux_dmabuf_params.create
code-path because this kills the client without allowing it to
gracefully handle the error.
We should only send a protocol error if the client provides a bit
not listed in the protocol definition.
The protocol uses a signed integer here, which is also what the
wlr_input_method_v2_preedit_string struct provides to compositors from
the input method protocol. Sway currently just passes those int32_t
values directly to this function leading to an implicit conversion.
The data field is useful to track metadata about a token. The destroy
events are useful for compositors that track application startup to
let them know they can stop doing that.
These new functions allow a compositor to request new managed tokens
without participating in the xdg-activation procedure as a wayland
client.
This enables the compositor itself to behave as a launcher
application.
Variables on the stack are released when the parent block is closed.
Here, `now` is used outside of the `if` block, causing the following
crash when starting Sway with the headless backend:
==49606==ERROR: AddressSanitizer: stack-use-after-scope on address 0x7fff94645f90 at pc 0x5558aeae9e29 bp 0x7fff94645df0 sp 0x7fff94645de0
READ of size 16 at 0x7fff94645f90 thread T0
#0 0x5558aeae9e28 in handle_present ../sway/desktop/output.c:834
#1 0x7fdc8d6792fb in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#2 0x7fdc8d54f77f in wlr_output_send_present ../subprojects/wlroots/types/output/output.c:766
#3 0x7fdc8d524a28 in output_commit ../subprojects/wlroots/backend/headless/output.c:71
#4 0x7fdc8d54d2db in wlr_output_commit ../subprojects/wlroots/types/output/output.c:629
#5 0x5558aeb013cb in output_render ../sway/desktop/render.c:1157
#6 0x5558aeae549e in output_repaint_timer_handler ../sway/desktop/output.c:544
#7 0x5558aeae5f8a in damage_handle_frame ../sway/desktop/output.c:606
#8 0x7fdc8d6792fb in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#9 0x7fdc8d6007d5 in output_handle_frame ../subprojects/wlroots/types/wlr_output_damage.c:44
#10 0x7fdc8d6792fb in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#11 0x7fdc8d54ee84 in wlr_output_send_frame ../subprojects/wlroots/types/output/output.c:720
#12 0x7fdc8d54efc3 in schedule_frame_handle_idle_timer ../subprojects/wlroots/types/output/output.c:728
#13 0x7fdc8c9dcf5a in wl_event_loop_dispatch_idle (/usr/lib/libwayland-server.so.0+0xaf5a)
#14 0x7fdc8c9dcfb4 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xafb4)
#15 0x7fdc8c9dabc6 in wl_display_run (/usr/lib/libwayland-server.so.0+0x8bc6)
#16 0x5558aeac8e30 in server_run ../sway/server.c:285
#17 0x5558aeac3c7d in main ../sway/main.c:396
#18 0x7fdc8be35b24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
#19 0x5558aea8686d in _start (/home/simon/src/sway/build/sway/sway+0x33f86d)
